TE Connectivity AMP 1-1337587-0 MCX Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP 1-1337587-0 is an MCX Connector Jack, Female Socket rated at 50 Ohms for panel mount crimp applications. This component operates across a frequency range up to 6 GHz and is designed for RF coaxial connector applications requiring reliable signal transmission in compact form factors.

The 1-1337587-0 carries an Obsolete product status. Identifying equivalent and substitute parts ensures design continuity and supply chain reliability for applications currently utilizing this connector in production or maintenance scenarios.

Substiute Parts

1-1337587-0

TE Connectivity AMP ConnectorsIn Stock: 10711-1337587-0 Datasheet

Current PartRFQ

24_MCX-50-1-13/111_NH

Huber+Suhner, Inc.In Stock: 73124_MCX-50-1-13/111_NH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity AMP 1-1337587-0 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: MCX
• Connector Type: Jack, Female Socket
• Impedance: 50 Ohms
• Contact Termination: Crimp
• Shield Termination: Crimp
• Mounting Type: Panel Mount
• Mounting Feature: Bulkhead - Front Side Nut
• Frequency - Max: 6 GHz
• Cable Group: RG-178, 196
• Fastening Type: Snap-On
• Mating Cycles: 500

The substitute part 24_MCX-50-1-13/111_NH from Huber+Suhner, Inc. satisfies all mandatory matching parameters, establishing it as a parametric equivalent for the obsolete TE Connectivity AMP connector.

Parameter Comparison

Engineering Selection Recommendations

The Huber+Suhner 24_MCX-50-1-13/111_NH is a parametric equivalent to the obsolete TE Connectivity AMP 1-1337587-0 based on matching all critical electrical and mechanical specifications.

Product Status Consideration: The TE Connectivity AMP 1-1337587-0 is classified as Obsolete, while the Huber+Suhner substitute maintains Active product status. This distinction ensures ongoing availability and manufacturer support for new designs or replacement inventory requirements.

Compliance and Certification: Both connectors carry EAR99 ECCN classification and share identical HTSUS coding (8536.69.4010). The TE Connectivity AMP part is RoHS Compliant with MSL 1 (Unlimited). The Huber+Suhner part carries REACH Unaffected status. Both components satisfy export control and environmental compliance frameworks applicable to RF coaxial connectors.

Operational Parameters: Both connectors operate within the same frequency range (6 GHz maximum), support identical cable groups (RG-178, 196), and maintain equivalent mating cycle ratings (500 cycles). The dielectric material composition differs slightly, with the Huber+Suhner part incorporating both PFA and PTFE, compared to PTFE alone in the original part.

Temperature and Voltage Ratings: The TE Connectivity AMP part operates across -65°C to 165°C with a 335 V rating. The Huber+Suhner substitute operates across -55°C to 155°C with a 170 V rating. Applications requiring the full temperature or voltage range of the original part require evaluation against the substitute's reduced specifications.

Frequently Asked Questions (FAQ)

Q: Can the Huber+Suhner 24_MCX-50-1-13/111_NH directly replace the TE Connectivity AMP 1-1337587-0 in existing designs?

A: The Huber+Suhner part matches all critical MCX connector parameters including impedance (50 Ohms), connector type (Jack, Female Socket), termination method (Crimp), mounting configuration (Panel Mount Bulkhead), and frequency rating (6 GHz). Direct substitution is supported for applications operating within the Huber+Suhner part's temperature range (-55°C to 155°C) and voltage rating (170 V).

Q: What are the key differences between these two connectors?

A: The primary differences are product status (Obsolete versus Active), operating temperature range (TE Connectivity: -65°C to 165°C; Huber+Suhner: -55°C to 155°C), voltage rating (TE Connectivity: 335 V; Huber+Suhner: 170 V), and dielectric material composition (TE Connectivity: PTFE only; Huber+Suhner: PFA and PTFE). All RF performance parameters and mechanical interfaces remain equivalent.

Q: Are there packaging differences between the original and substitute parts?

A: The TE Connectivity AMP 1-1337587-0 includes 3 pieces per connector package (1 Connector, 1 Contact, 1 Ferrule). The Huber+Suhner 24_MCX-50-1-13/111_NH is supplied in Bulk packaging. Packaging configuration should be evaluated against procurement and assembly requirements.

Q: What compliance certifications apply to both connectors?

A: Both connectors carry EAR99 ECCN classification and share identical HTSUS coding (8536.69.4010). The TE Connectivity AMP part is RoHS Compliant with MSL 1 (Unlimited). The Huber+Suhner part carries REACH Unaffected status. Both satisfy applicable export control and environmental compliance requirements for RF coaxial connectors.

Q: Can the substitute part handle the same cable types as the original?

A: Both connectors support identical cable groups: RG-178 and RG-196. Cable compatibility is maintained across the substitution.

Q: What is the mating cycle rating for both connectors?

A: Both the TE Connectivity AMP 1-1337587-0 and Huber+Suhner 24_MCX-50-1-13/111_NH are rated for 500 mating cycles, ensuring equivalent mechanical durability for connection and disconnection operations.