TE Connectivity AMP Connectors 1-1337406-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-1337406-0 is an N Type Connector Jack with female socket configuration, rated for 50 Ohms impedance and designed for free hanging (in-line) solder termination. This coaxial RF connector operates across a frequency range up to 11 GHz and is compatible with RG-8A and 213 cable groups. The part maintains Active product status and is ROHS3 compliant with REACH affected designation. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where the original part becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

1-1337406-0

TE Connectivity AMP ConnectorsIn Stock: 11601-1337406-0 Datasheet

Current PartRFQ

082-209-1006

Amphenol RFIn Stock: 1000082-209-1006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity AMP Connectors 1-1337406-0 are identified based on strict alignment of critical electrical and mechanical parameters. The substitution logic requires equivalence across the following key parameters:

Electrical Parameters:

• Connector Style: N Type
• Connector Type: Jack, Female Socket
• Impedance: 50 Ohms
• Frequency - Max: 11 GHz
• Voltage Rating: Minimum 1000 V
• Operating Temperature Range: -65°C ~ 165°C

Mechanical Parameters:

• Contact Termination: Solder
• Shield Termination: Clamp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Number of Ports: 1
• Body Material: Brass
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• Mating Cycles: 500

The Amphenol RF 082-209-1006 meets all critical substitution criteria and qualifies as a direct equivalent for the main part.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity AMP Connectors 1-1337406-0 and Amphenol RF 082-209-1006 maintain Active product status and satisfy ROHS3 compliance requirements with REACH affected designation. The Amphenol RF 082-209-1006 provides equivalent electrical performance across all critical parameters including impedance, frequency range, and operating temperature specifications. The substitute part exceeds the voltage rating of the main part at 1500 V compared to 1000 V, providing additional margin in high-voltage applications. Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications, ensuring consistent regulatory treatment. Selection between these parts depends on cable group compatibility requirements and specific application constraints, as the main part supports RG-8A and 213 cable groups while the substitute supports Belden 9913, 9914, and LMR-400 cable groups.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol RF 082-209-1006 directly replace the TE Connectivity 1-1337406-0 in all applications?

A: The Amphenol RF 082-209-1006 qualifies as a direct electrical and mechanical equivalent based on matching connector style, impedance, frequency range, operating temperature, and termination specifications. Compatibility depends on cable group requirements for your specific application. Verify that your cable type aligns with either RG-8A/213 (main part) or Belden 9913/9914/LMR-400 (substitute part).

Q: What are the key differences between these two parts?

A: The primary differences are body finish (Silver versus Nickel), center contact material (Phosphor Bronze versus Beryllium Copper), voltage rating (1000 V versus 1500 V), and compatible cable groups. The Amphenol RF part includes weatherproof ingress protection and provides higher voltage rating capability. Both parts maintain identical impedance, frequency response, and operating temperature specifications.

Q: Are both parts RoHS compliant?

A: Yes, both the TE Connectivity 1-1337406-0 and Amphenol RF 082-209-1006 are ROHS3 compliant with MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: What is the significance of the different cable group specifications?

A: Cable group specifications indicate the recommended cable types for optimal performance with each connector. The main part supports RG-8A and 213 cables, while the substitute supports Belden 9913, 9914, and LMR-400 cables. Selection should align with your system's cable specifications to ensure proper impedance matching and signal integrity.

Q: Do both parts have the same mating cycle rating?

A: Yes, both parts are rated for 500 mating cycles, indicating equivalent mechanical durability and connector longevity under repeated connection and disconnection operations.

Q: What compliance certifications apply to both parts?

A: Both parts carry ROHS3 compliance, REACH affected status, EAR99 ECCN classification, and HTSUS code 8536.69.4010. These designations ensure consistent regulatory treatment across procurement and export scenarios.