LAPP 11236100 Equivalent & Substitute Parts

Part Overview

The LAPP 11236100 is an EPIC® series heavy duty connector contact, specifically a stamped crimp socket designed for 16-20 AWG wire gauges with silver contact finish. This component is classified as Active product status and is fully RoHS3 compliant. Alternative equivalent parts may be required due to inventory constraints, application-specific mechanical requirements, or series compatibility needs within existing connector assemblies.

Substiute Parts

11236100

LAPPIn Stock: 92211236100 Datasheet

Current PartRFQ

09150006201

HARTINGIn Stock: 121609150006201 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 11236100 is determined by the following critical parameters:

• Contact Type & Function: Socket configuration for crimp termination
• Wire Gauge Compatibility: 16-20 AWG range (substitutes must support minimum 16 AWG)
• Contact Finish: Silver plating for electrical conductivity and corrosion resistance
• Termination Method: Crimp-style connection
• Compliance Standards: RoHS3 compliance and MSL 1 rating required
• Connector Category: Heavy duty connector contacts

The HARTING 09150006201 qualifies as an equivalent substitute based on matching socket configuration, crimp termination, silver contact finish, RoHS3 compliance, and MSL 1 rating. Wire gauge coverage (16 AWG) falls within the acceptable range for applications requiring 16 AWG minimum specification.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 11236100 and HARTING 09150006201 meet the core compliance requirements for heavy duty connector applications. Both components maintain Active product status, ensuring continued manufacturer support and supply chain availability. RoHS3 compliance and MSL 1 rating confirm suitability for standard industrial and commercial environments without moisture sensitivity constraints.

Selection between these parts should be based on connector series compatibility within the target assembly. The LAPP component belongs to the EPIC® series, while the HARTING component belongs to the Han® D series. Mechanical fit and mating interface specifications must be verified against the host connector body to ensure proper assembly integration.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09150006201 directly replace the LAPP 11236100 in existing assemblies?

A: Direct mechanical compatibility depends on the connector body series. The LAPP 11236100 is EPIC® series-specific, while the HARTING 09150006201 is Han® D series-specific. Verify that the host connector body accepts Han® D series contacts before substitution.

Q: What is the significance of the wire gauge difference (16-20 AWG vs. 16 AWG)?

A: The LAPP part supports a broader wire gauge range. The HARTING substitute supports 16 AWG minimum. For applications requiring 18-20 AWG wire termination, the LAPP 11236100 is the appropriate choice. For 16 AWG applications, both parts are functionally equivalent.

Q: Are both parts suitable for moisture-sensitive environments?

A: Both components carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints. Both are suitable for standard industrial environments without special moisture control requirements.

Q: Do both parts meet export compliance requirements?

A: Both components are classified as EAR99 under ECCN and share the same HTSUS code (8536.90.4000), confirming equivalent export classification and regulatory treatment.

Q: What is the difference between stamped and machined contact types?

A: The LAPP 11236100 uses stamped construction, while the HARTING 09150006201 uses machined construction. Both manufacturing methods produce contacts suitable for crimp termination. Machined contacts may offer enhanced durability in high-cycle mating applications, while stamped contacts provide cost efficiency for standard applications.