TE Connectivity AMP Connectors 1-120534-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-120534-1 is a 64 Position Connector Plug with Center Strip Contacts designed for Surface Mount applications. This rectangular connector operates within the Free Height (FH) IEEE 1386 and PMC series standards. The part is currently Active in product status and is available in Tube packaging with 1164 pieces in stock.

Substitute parts are identified to address packaging format requirements, compliance certifications, and inventory availability while maintaining functional and mechanical compatibility within the specified electrical parameters.

Substiute Parts

1-120534-1

TE Connectivity AMP ConnectorsIn Stock: 12331-120534-1 Datasheet

Current PartRFQ

5120527-1

TE Connectivity AMP ConnectorsIn Stock: 26665120527-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connectors in this category is determined by equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Number of Positions: 64
• Pitch: 0.039" (1.00mm)
• Number of Rows: 2
• Connector Type: Plug, Center Strip Contacts
• Mounting Type: Surface Mount
• Mated Stacking Heights: 10mm, 12mm, 13mm, 15mm
• Height Above Board: 0.329" (8.35mm)
• Series: Free Height (FH) IEEE 1386, PMC

Variable Parameters (Non-Substitution Limiting):

• Packaging format (Tube vs. Cut Tape)
• Contact Finish Thickness
• RoHS compliance status
• Inventory availability

The substitute part 5120527-1 maintains full equivalence across all mandatory parameters, enabling direct functional substitution while offering alternative packaging and compliance options.

Parameter Comparison

Engineering Selection Recommendations

Part 1-120534-1 Selection Criteria:

• Applications requiring Tube packaging format for bulk component handling
• Designs where RoHS non-compliance is acceptable or not a regulatory requirement
• Higher contact finish thickness specification (50.0µin) where additional plating durability is specified
• Existing inventory availability of 1164 pieces

Part 5120527-1 Selection Criteria:

• Applications requiring ROHS3 compliance for regulatory adherence
• Designs utilizing Cut Tape (CT) packaging for automated assembly processes
• Applications where contact finish thickness of 30.0µin (0.76µm) meets electrical performance requirements
• Higher inventory availability of 2600 pieces
• Inclusion of Board Guide feature for enhanced assembly alignment

Both parts maintain Active product status and are functionally equivalent across all critical connector parameters. Selection between these parts is determined by packaging requirements, compliance mandates, and assembly process specifications rather than electrical or mechanical performance differences.

Frequently Asked Questions (FAQ)

Q: Can 5120527-1 be used as a direct replacement for 1-120534-1 in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters including position count, pitch, mounting type, stacking heights, and board height. The primary differences are packaging format and RoHS compliance status, which do not affect connector functionality or mating compatibility.

Q: What is the significance of the contact finish thickness difference between these parts?

A: The main part 1-120534-1 features 50.0µin (1.27µm) gold plating, while substitute 5120527-1 features 30.0µin (0.76µm) gold plating. Both thicknesses are within industry standards for gold-plated contacts. Selection depends on specific design requirements for contact durability and wear resistance in the intended application environment.

Q: How does packaging format affect component selection?

A: The main part is supplied in Tube packaging, suitable for manual handling and bulk storage. The substitute part is supplied in Cut Tape (CT) packaging, optimized for automated pick-and-place assembly equipment. Packaging selection is determined by manufacturing process capabilities and assembly automation requirements, not connector performance.

Q: What does ROHS3 compliance mean for part 5120527-1?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting specific hazardous materials in electrical and electronic equipment. This certification is required for products sold in certain markets and regulatory jurisdictions. The main part 1-120534-1 is RoHS non-compliant and may not be suitable for applications with RoHS compliance mandates.

Q: Are the mated stacking heights identical between both parts?

A: Yes. Both parts support identical mated stacking heights of 10mm, 12mm, 13mm, and 15mm, ensuring compatibility with connector stacks and multi-level PCB assemblies.

Q: What is the Board Guide feature on part 5120527-1?

A: The Board Guide feature on substitute part 5120527-1 provides mechanical alignment assistance during PCB assembly, enhancing placement accuracy for automated assembly processes. This feature does not affect electrical performance or mating compatibility with the main part.

Q: Can these parts be intermixed in the same assembly?

A: Yes. Both parts are functionally equivalent and can be used interchangeably within the same assembly, provided that packaging format and compliance requirements do not create process constraints or regulatory conflicts.