EPIC® HBE Contact Crimp Socket 11197000

Part Overview

The LAPP 11197000 is an active, ROHS3-compliant heavy duty connector contact designed for crimp termination applications. This machined socket contact accommodates 20 AWG wire gauge and features gold plating for enhanced conductivity and corrosion resistance. With 1203 pieces in current inventory, this component serves as a standard contact element within the EPIC® HBE connector series. Alternative equivalent parts may be required due to supply chain considerations, regional availability, or specific procurement requirements.

Substiute Parts

11197000

LAPPIn Stock: 129211197000 Datasheet

Current PartRFQ

09330006222

HARTINGIn Stock: 111209330006222 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 11197000 is determined by strict alignment of the following critical parameters:

• Contact configuration: Socket type only
• Wire gauge compatibility: 20 AWG
• Termination method: Crimp termination
• Contact finish: Gold plating
• Mechanical construction: Machined contact
• Regulatory compliance: ROHS3 Compliant, REACH Unaffected
• Moisture sensitivity: MSL 1 (Unlimited)

The HARTING 09330006222 contact meets all substitution criteria within these parameters. Both components are active products with identical wire gauge, termination method, contact finish, and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 11197000 and HARTING 09330006222 are active products with full ROHS3 compliance and REACH unaffected status. Selection between these components should be based on connector series compatibility within the end application. The LAPP 11197000 integrates with EPIC® HBE series connectors, while the HARTING 09330006222 is designed for Han® series connectors. Ensure that the selected contact matches the mating connector series and housing specifications of your assembly. Both contacts meet identical electrical and mechanical substitution criteria for 20 AWG crimp socket applications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09330006222 be used as a direct replacement for the LAPP 11197000?

A: Both contacts meet identical electrical and mechanical specifications for 20 AWG crimp socket applications. However, they belong to different connector series (EPIC® HBE versus Han®). Compatibility depends on whether your connector housing accepts contacts from either series. Verify connector series compatibility before substitution.

Q: What wire gauge range does this contact support?

A: Both the LAPP 11197000 and HARTING 09330006222 are specified for 20 AWG wire gauge only. Do not use with wire gauges outside this specification.

Q: Are both contacts RoHS compliant?

A: Yes. Both the LAPP 11197000 and HARTING 09330006222 are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Q: What is the difference in contact finish thickness between these parts?

A: The HARTING 09330006222 specifies a contact finish thickness of 78.7µin (2.00µm). The LAPP 11197000 does not provide finish thickness specification in available documentation. Both use gold plating as the contact finish material.

Q: Can these contacts be used in applications with unlimited moisture exposure?

A: Yes. Both contacts carry Moisture Sensitivity Level 1 (MSL 1), indicating unlimited moisture sensitivity rating. No special moisture control measures are required during storage or handling.

Q: What is the difference between the EPIC® HBE and Han® series?

A: These are distinct connector series from different manufacturers. EPIC® HBE is the LAPP series, while Han® is the HARTING series. Each series has specific housing and contact interface specifications. Contacts are not interchangeable between series unless the connector housing is designed to accept contacts from multiple series.