TE Connectivity AMP Connectors 111445-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 111445-8 is a 34 Position Rectangular Plug Connector with Insulation Displacement Contact (IDC) termination, designed for ribbon cable applications in the 26-28 AWG wire gauge range. This connector features gold-plated male pins and is part of the AMP-Latch series. The product maintains Active status and is suitable for free-hanging, in-line mounting configurations. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements necessitate evaluation of equivalent connector solutions.

Substiute Parts

111445-8

TE Connectivity AMP ConnectorsIn Stock: 1034111445-8 Datasheet

Current PartRFQ

4634-6001

3MIn Stock: 16494634-6001 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular IDC connectors is determined by strict alignment of electrical and mechanical parameters. The following criteria establish substitution validity:

Critical Matching Parameters:

• Connector Type (Plug configuration)
• Number of Positions (34 positions)
• Pitch spacing (0.100" / 2.54mm)
• Row configuration (2 rows at 0.100" spacing)
• Cable Termination method (IDC)
• Wire Gauge compatibility (26-28 AWG)
• Contact Type (Male Pin)
• Mounting configuration (Free Hanging, In-Line)

The 3M 4634-6001 connector satisfies all critical matching parameters. Both connectors accommodate 34-position configurations with identical pitch and row spacing, support IDC termination for 26-28 AWG conductors, and feature gold-plated male pin contacts suitable for free-hanging applications. The 3M part accepts both discrete and ribbon cable wire types, providing expanded application flexibility compared to the primary part specification.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 111445-8 and 3M 4634-6001 connectors are Active products with equivalent electrical and mechanical specifications for 34-position IDC applications. Selection between these parts is based on the following factors:

TE Connectivity 111445-8: Maintains AMP-Latch series compatibility and is specified for ribbon cable applications. The connector is suitable for designs requiring standardized AMP connector ecosystem integration.

3M 4634-6001: Offers expanded wire type flexibility, accepting both discrete and ribbon cable configurations with stranded or solid conductor options. The contact finish thickness of 30.0µin (0.76µm) provides enhanced durability compared to the 15.0µin (0.38µm) specification of the primary part. This part is ROHS3 compliant, whereas the primary part carries Not Applicable RoHS status. The 3M connector is packaged in Bulk format.

Both connectors share identical pitch, row spacing, position count, and IDC termination methodology. Both maintain MSL 1 (Unlimited) moisture sensitivity classification and EAR99 export control designation. Selection should be based on wire type requirements, compliance mandates, and connector series ecosystem requirements for the specific application.

Frequently Asked Questions (FAQ)

Q: Can the 3M 4634-6001 directly replace the TE Connectivity 111445-8 in existing designs?

A: Yes, the 3M 4634-6001 is mechanically and electrically compatible. Both connectors feature identical 34-position configurations, 0.100" pitch, 2-row layouts, and IDC termination for 26-28 AWG conductors. Physical dimensions and contact spacing are equivalent, allowing direct substitution in applications where the connector series ecosystem does not impose restrictions.

Q: What is the significance of the contact finish thickness difference?

A: The 3M 4634-6001 specifies 30.0µin (0.76µm) gold plating thickness, compared to 15.0µin (0.38µm) for the TE Connectivity 111445-8. The increased thickness on the 3M connector provides extended contact durability and wear resistance, particularly beneficial in high-cycle mating applications or environments with frequent connection cycling.

Q: Does the 3M connector's support for discrete wire types affect compatibility?

A: The 3M 4634-6001 accepts both discrete and ribbon cable wire types, whereas the TE Connectivity 111445-8 is specified for ribbon cable. This expanded capability in the 3M part does not restrict its use in ribbon cable applications. Applications requiring discrete wire termination can only utilize the 3M 4634-6001.

Q: Are there compliance differences between these connectors?

A: The 3M 4634-6001 is ROHS3 compliant, while the TE Connectivity 111445-8 carries Not Applicable RoHS status. Both connectors share identical ECCN (EAR99) and HTSUS (8536.69.4051) classifications. Design requirements mandating ROHS3 compliance necessitate selection of the 3M part.

Q: What packaging considerations apply to these connectors?

A: The TE Connectivity 111445-8 packaging specification is not provided in the available data. The 3M 4634-6001 is supplied in Bulk packaging format. Packaging requirements should be evaluated against procurement and inventory management specifications for the application.

Q: Are both connectors suitable for free-hanging, in-line mounting?

A: Yes, both the TE Connectivity 111445-8 and 3M 4634-6001 are specified for Free Hanging (In-Line) mounting type, making them suitable for applications requiring cable-mounted connector configurations without panel or enclosure mounting requirements.