TE Connectivity 111382-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 111382-1 is a 10-position ribbon cable DIP header connector with IDC termination, designed for through-hole and press-fit mounting applications. This connector features a 0.050" (1.27mm) cable pitch and 0.100" (2.54mm) board-side pitch configuration with dual-row layout. The part is classified as obsolete, necessitating identification of active equivalent and substitute components to maintain design continuity and ensure procurement availability for new production and field service applications.

Substiute Parts

111382-1

TE Connectivity AMP ConnectorsIn Stock: 1182111382-1 Datasheet

Current PartRFQ

1-111382-4

TE Connectivity AMP ConnectorsIn Stock: 18051-111382-4 Datasheet

DirectRFQ

69830-010LF

Amphenol ICC (FCI)In Stock: 319769830-010LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 111382-1 is determined by strict alignment with the following critical parameters: connector type (ribbon cable DIP header), number of positions (10), cable pitch (0.050"), board-side pitch (0.100"), number of rows (2), row spacing (0.100"), mounting type (through hole), cable termination method (IDC), wire gauge compatibility (26-30 AWG), and feed-through feature presence.

The substitute parts identified maintain these core electrical and mechanical specifications, ensuring functional interchangeability within the original design envelope. Variations in secondary parameters such as contact finish thickness, color, and RoHS compliance status do not affect core connector functionality but may influence procurement decisions based on regulatory requirements and application constraints.

Parameter Comparison

Engineering Selection Recommendations

1-111382-4 (Direct Equivalent)

The 1-111382-4 represents the primary substitute for the obsolete 111382-1. Both components share identical electrical and mechanical specifications within the AMP-Latch series. The 1-111382-4 maintains active product status and achieves RoHS compliance, addressing regulatory requirements for new designs. This part is the preferred selection for direct replacement applications where design continuity and component interchangeability are required.

69830-010LF (Similar Substitute)

The 69830-010LF from Amphenol ICC (FCI) provides functional equivalence through the Quickie™ series platform. This connector maintains all critical pitch, position, and termination specifications. The primary distinction is the wire gauge specification of 26-28 AWG (compared to 26-30 AWG for the main part), which remains within acceptable operating parameters for standard ribbon cable applications. The 69830-010LF achieves RoHS compliance and REACH affected status. Selection of this part is appropriate when Amphenol ICC component qualification is required or when supply chain diversification is a procurement objective.

Frequently Asked Questions (FAQ)

Q: Can the 1-111382-4 be used as a direct replacement for the 111382-1 in existing designs?

A: Yes. The 1-111382-4 maintains identical electrical and mechanical specifications, including connector type, position count, pitch dimensions, mounting configuration, and IDC termination method. The primary difference is active product status and RoHS compliance of the 1-111382-4 versus the obsolete, non-compliant status of the 111382-1.

Q: What is the significance of the wire gauge difference between 111382-1 and 69830-010LF?

A: The 111382-1 accepts 26-30 AWG solid wire and 28 AWG stranded wire. The 69830-010LF accepts 26-28 AWG stranded or solid wire. The 26-28 AWG range of the 69830-010LF is a subset of the 111382-1 specification and is fully compatible with standard ribbon cable applications within this gauge range.

Q: Does the color difference between the black 111382-1 and blue 69830-010LF affect functionality?

A: No. Color is a cosmetic parameter that does not affect electrical or mechanical performance. Color selection may be driven by application identification requirements or internal design standards but does not impact connector interchangeability.

Q: Are there packaging differences between the substitute parts?

A: The 1-111382-4 is supplied in tube packaging. The 69830-010LF is also supplied in tube packaging. Both packaging formats are standard for DIP header connectors and do not affect component functionality.

Q: What is the impact of RoHS compliance status on part selection?

A: The 111382-1 is RoHS non-compliant due to tin-lead contact finish. Both substitute parts (1-111382-4 and 69830-010LF) are RoHS compliant. For applications subject to RoHS regulations or customer requirements, the compliant substitutes are mandatory. For legacy systems without RoHS constraints, either substitute remains functionally equivalent.

Q: Can both substitute parts be used interchangeably within the same design?

A: Yes, within the constraints of component qualification and supply chain requirements. Both the 1-111382-4 and 69830-010LF meet the core electrical and mechanical specifications of the 111382-1. However, design documentation and procurement specifications should identify the primary preferred part to ensure consistency across production batches and field service inventory.