TE Connectivity AMP Connectors 1-111448-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-111448-3 is a 64 Position Rectangular Plug Connector with Insulation Displacement Contact (IDC) termination, gold-plated contacts, and support for 26-28 AWG ribbon cable. This connector is part of the AMP-Latch series and maintains Active product status with RoHS compliance. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the original part is unavailable or when alternative packaging or mounting configurations are acceptable within the specified parameter constraints.

Substiute Parts

1-111448-3

TE Connectivity AMP ConnectorsIn Stock: 10261-111448-3 Datasheet

Current PartRFQ

4664-6000

3MIn Stock: 8074664-6000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1-111448-3 are identified based on strict equivalence of the following critical parameters:

• Connector Type: Plug configuration
• Position Count: 64 positions
• Pitch and Row Configuration: 0.100" (2.54mm) pitch with 2-row arrangement and 0.100" row spacing
• Termination Method: IDC (Insulation Displacement Contact)
• Wire Gauge Compatibility: 26-28 AWG
• Contact Finish: Gold plating at 30.0µin (0.76µm) thickness
• Contact Gender: Male Pin

The 3M 4664-6000 meets all these core electrical and mechanical parameters. Differences in mounting type (Panel Mount versus Free Hanging), wire type acceptance (Ribbon Cable only versus Discrete or Ribbon Cable), color, and series designation do not affect functional substitution when these core parameters align.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1-111448-3 and the 3M 4664-6000 are Active status products with full RoHS compliance certifications. The TE Connectivity part carries RoHS Compliant status, while the 3M part carries ROHS3 Compliant status, both meeting current regulatory requirements.

Selection between these parts is determined by application-specific requirements:

• TE Connectivity 1-111448-3: Select when Panel Mount configuration is required for fixed installation applications.
• 3M 4664-6000: Select when Free Hanging (In-Line) configuration is required for cable assembly applications. This part also accepts both stranded and solid wire in addition to ribbon cable, providing greater wire type flexibility.

Both parts maintain identical electrical performance characteristics including 64-position capacity, 0.100" pitch, 2-row configuration, IDC termination, 26-28 AWG wire gauge support, and gold contact finish at 30.0µin thickness. Moisture sensitivity and export classification are equivalent across both parts.

Frequently Asked Questions (FAQ)

Q: Can the 3M 4664-6000 directly replace the TE Connectivity 1-111448-3 in all applications?

A: Electrical and mechanical compatibility is confirmed for all core parameters. The primary difference is mounting type: the TE Connectivity part is Panel Mount while the 3M part is Free Hanging (In-Line). Substitution is valid when the application accommodates the Free Hanging configuration.

Q: What is the significance of the wire type difference between Ribbon Cable only and Discrete or Ribbon Cable?

A: The TE Connectivity 1-111448-3 is specified for Ribbon Cable termination. The 3M 4664-6000 accepts both Discrete and Ribbon Cable wire types. This provides greater flexibility with the 3M part but does not affect compatibility when Ribbon Cable is used in both cases.

Q: Are the contact finish specifications identical?

A: Yes. Both parts feature gold-plated contacts with 30.0µin (0.76µm) thickness, ensuring equivalent electrical performance and corrosion resistance.

Q: Do both parts meet current RoHS requirements?

A: Yes. The TE Connectivity part is RoHS Compliant and the 3M part is ROHS3 Compliant. Both meet current regulatory standards. The 3M part additionally carries REACH Unaffected status.

Q: What is the difference in packaging between these parts?

A: The TE Connectivity 1-111448-3 packaging is not specified in the provided data. The 3M 4664-6000 is supplied in Bulk packaging.

Q: Are the pitch and row spacing parameters identical?

A: Yes. Both parts feature 0.100" (2.54mm) pitch with 2-row configuration and 0.100" row spacing, ensuring mechanical interchangeability at the connector interface level.

Q: Can either part be used with stranded wire?

A: The TE Connectivity 1-111448-3 is specified for Ribbon Cable only. The 3M 4664-6000 accepts both stranded and solid discrete wire in addition to Ribbon Cable, providing wire type flexibility.