TE Connectivity 1-111196-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-111196-2 is a 60 Position Rectangular Receptacle Connector designed for IDC (Insulation Displacement Contact) termination with ribbon cable. This connector operates within the AMPMODU System 50 series and features gold-plated female socket contacts rated for 30-32 AWG wire gauges. The part is currently active in production and maintains unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to address inventory availability, compliance requirements, or specific application needs where equivalent electrical and mechanical specifications are required.

Substiute Parts

1-111196-2

TE Connectivity AMP ConnectorsIn Stock: 8141-111196-2 Datasheet

Current PartRFQ

2-111196-2

TE Connectivity AMP ConnectorsIn Stock: 1843202-111196-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 1-111196-2 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

Electrical Parameters:

• 60 position count
• 0.050" (1.27mm) pitch spacing
• 2-row configuration with 0.100" (2.54mm) row spacing
• 30-32 AWG wire gauge compatibility
• Gold contact finish with 30.0µin (0.76µm) thickness

Mechanical Parameters:

• Receptacle connector type with female socket contacts
• IDC cable termination method for ribbon cable
• Free hanging in-line mounting configuration
• Latch lock fastening mechanism
• Black housing color

Compliance Parameters:

• AMPMODU System 50 series designation
• EAR99 ECCN classification
• HTSUS code 8536.69.4051

Parts meeting all these criteria are classified as direct substitutes and are electrically and mechanically interchangeable within the same application circuit.

Parameter Comparison

Engineering Selection Recommendations

The 2-111196-2 serves as a direct electrical and mechanical substitute for the 1-111196-2. Both parts are manufactured by TE Connectivity within the AMPMODU System 50 series and maintain identical specifications across all critical connector parameters including position count, pitch, row configuration, contact type, termination method, and wire gauge compatibility.

Compliance Considerations:

The primary distinction between these parts lies in regulatory compliance status. The 2-111196-2 achieves ROHS3 compliance and REACH unaffected status, whereas the 1-111196-2 is RoHS non-compliant and REACH affected. Applications subject to RoHS3 or REACH regulatory requirements should specify the 2-111196-2 variant.

Inventory and Availability:

The 2-111196-2 maintains significantly higher inventory levels (184,296 pieces) compared to the 1-111196-2 (773 pieces), providing improved supply chain reliability for high-volume production requirements.

Application Compatibility:

Both parts are functionally equivalent for IDC ribbon cable termination in 60-position rectangular connector applications. Selection between these variants should be based on regulatory compliance mandates and inventory availability rather than electrical or mechanical performance differences.

Frequently Asked Questions (FAQ)

Q: Are the 1-111196-2 and 2-111196-2 electrically interchangeable?

A: Yes. Both parts maintain identical electrical specifications including 60 positions, 0.050" pitch, 2-row configuration, gold contact finish, and 30-32 AWG wire gauge compatibility. They are electrically interchangeable within the same circuit application.

Q: What is the difference between these two part numbers?

A: The primary differences are regulatory compliance status and inventory availability. The 2-111196-2 is ROHS3 compliant and REACH unaffected, while the 1-111196-2 is RoHS non-compliant and REACH affected. The 2-111196-2 also has substantially higher inventory levels.

Q: Can I use the 2-111196-2 as a replacement for the 1-111196-2 in existing designs?

A: Yes, the 2-111196-2 is a direct mechanical and electrical substitute. No design modifications are required. However, verify that your application does not have specific compliance restrictions that would exclude the 1-111196-2 variant.

Q: Do these connectors require different mounting procedures?

A: No. Both parts use identical free hanging in-line mounting with latch lock fastening. Installation procedures and mechanical integration are identical.

Q: What ribbon cable specifications are compatible with these connectors?

A: Both connectors accept 30-32 AWG ribbon cable with IDC termination. The 0.050" pitch and 2-row configuration determine the ribbon cable format requirements.

Q: Are there any performance differences between these part numbers?

A: No performance differences exist. Both parts deliver identical electrical performance, contact resistance, and mechanical durability within the AMPMODU System 50 series specification.

Q: Which part should I specify for new designs?

A: For new designs, specify the 2-111196-2 to ensure ROHS3 compliance and REACH compliance status, unless your application specifically requires the 1-111196-2 variant for legacy system compatibility.