TE Connectivity AMP Connectors 1-106012-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-106012-1 is a 55-position header connector with male pins, designed for backplane applications. This connector features a 2.00mm (0.079") pitch, right-angle board edge mounting with through-hole termination using press-fit technology. The part is classified as obsolete, making identification of equivalent and substitute components necessary for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

1-106012-1

TE Connectivity AMP ConnectorsIn Stock: 8631-106012-1 Datasheet

Current PartRFQ

1-5106012-1

TE Connectivity AMP ConnectorsIn Stock: 8601-5106012-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1-106012-1 connector is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Number of Positions: 55
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Current Rating: 1.5 A
• Voltage Rating: 500Vrms
• Operating Temperature Range: -55°C to 125°C

Mechanical Parameters:

• Connector Type: Header, Male Pins
• Connector Style: C 11
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination Method: Press-Fit
• Connector Usage: Backplane

Compliance Parameters:

• RoHS Compliance: Required
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part 1-5106012-1 maintains full equivalence across all electrical, mechanical, and compliance parameters. The primary distinction is product status (active versus obsolete) and packaging format (tube packaging for the substitute).

Parameter Comparison

Engineering Selection Recommendations

The substitute part 1-5106012-1 provides full functional and mechanical equivalence to the obsolete 1-106012-1 connector. Selection of the substitute is supported by the following factors:

Product Status Consideration: The main part 1-106012-1 carries obsolete status, while the substitute 1-5106012-1 is classified as active. Active product status ensures ongoing availability, manufacturing support, and compliance with current regulatory requirements.

Compliance Alignment: Both parts maintain identical RoHS compliance status and moisture sensitivity level (MSL 1), ensuring compatibility with current environmental and regulatory standards.

Electrical and Mechanical Equivalence: All critical electrical parameters (current rating, voltage rating, operating temperature range) and mechanical specifications (connector type, pitch, mounting configuration, termination method) are identical between the main part and substitute.

Contact Finish Enhancement: The substitute part specifies gold contact finish at 30.0µin (0.76µm) thickness, whereas the main part does not specify contact finish. This represents an enhancement in contact reliability and corrosion resistance.

Packaging Availability: The substitute is available in tube packaging, providing standard distribution format for active components.

Frequently Asked Questions (FAQ)

Q: Can the 1-5106012-1 substitute be used as a direct replacement for the 1-106012-1?

A: Yes. The 1-5106012-1 maintains identical electrical, mechanical, and compliance specifications across all critical parameters including connector type, position count, pitch, mounting configuration, current rating, voltage rating, and operating temperature range.

Q: What is the significance of the product status difference between the main part and substitute?

A: The main part 1-106012-1 is classified as obsolete, indicating discontinued manufacturing and limited availability. The substitute 1-5106012-1 is active, ensuring ongoing production, supply chain availability, and compliance with current manufacturing standards.

Q: Does the gold contact finish on the substitute part affect compatibility?

A: No. The gold contact finish on the 1-5106012-1 is a material enhancement that improves contact reliability and corrosion resistance. It does not alter electrical or mechanical compatibility with applications designed for the 1-106012-1.

Q: Are there packaging differences between these parts?

A: The main part 1-106012-1 packaging is not specified in available documentation. The substitute 1-5106012-1 is supplied in tube packaging, which is standard for active backplane connector distribution.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both the 1-106012-1 and 1-5106012-1 are RoHS compliant and carry identical moisture sensitivity level (MSL 1) ratings, ensuring compliance with current environmental and handling standards.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by equivalence in connector type, position count (55), pitch (2.00mm), row configuration (5 rows), mounting type (board edge, through hole, right angle), termination method (press-fit), current rating (1.5 A), voltage rating (500Vrms), operating temperature range (-55°C to 125°C), and compliance certifications (RoHS, MSL 1).