TE Connectivity 1-104433-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-104433-5 is a rectangular connector header manufactured under the AMPMODU Mod II series. This through-hole vertical mount connector features 30 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector is designed for board-to-board or cable applications with male pin contacts and push-pull fastening. The product is classified as obsolete, making equivalent and substitute parts necessary for ongoing design requirements and component sourcing.

Key Parameters

Parameter	Value
Manufacturer Part Number	1-104433-5
Manufacturer	TE Connectivity AMP Connectors
Category	Rectangular Connectors
Series	AMPMODU Mod II
Product Status	Obsolete
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	30
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Press-Fit, Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Current Rating	3A
Voltage Rating	30VAC
Operating Temperature	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-104433-5 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

Number of Positions: 30
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Contact Type: Male Pin
Mounting Type: Through Hole
Fastening Type: Push-Pull
Connector Type: Header (with or without breakaway capability)
Style: Board to Board or Cable

Compatible Variation Parameters:

Contact Finish - Mating: Gold or Tin (both acceptable for signal-level applications)
Contact Material: Copper Alloy, Phosphor Bronze, or Brass
Insulation Material: Thermoplastic or Polyamide variants
Operating Temperature Range: Must encompass or exceed the original -65°C ~ 105°C range
Current Rating: Must support minimum 3A per contact
Termination: Solder or Press-Fit acceptable; Kinked Pin acceptable for board-to-board applications

Compliance Considerations:

RoHS Compliant alternatives are preferred for new designs but RoHS non-compliant parts remain functionally equivalent
All substitute parts maintain UL94 V-0 flammability rating
Moisture Sensitivity Level 1 (Unlimited) maintained across all substitutes

Substitute parts are grouped by manufacturer and series to facilitate sourcing while maintaining electrical and mechanical compatibility.

Parameter Comparison

Parameter	1-104433-5 (TE)	54102-T32-15 (Amphenol)	68691-130HLF (Amphenol)	77313-122-30LF (Amphenol)	77313-422-30LF (Amphenol)	77313-822-30LF (Amphenol)	78548-130 (Amphenol)	78548-630 (Amphenol)	892-18-030-10-001101 (Preci-Dip)	892-18-030-10-002101 (Preci-Dip)	A1-30PA-2.54DSA(71) (Hirose)
Manufacturer Part Number	1-104433-5	54102-T32-15	68691-130HLF	77313-122-30LF	77313-422-30LF	77313-822-30LF	78548-130	78548-630	892-18-030-10-001101	892-18-030-10-002101	A1-30PA-2.54DSA(71)
Manufacturer	TE Connectivity	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Preci-Dip	Preci-Dip	Hirose Electric
Series	AMPMODU Mod II	BERGSTIK®	BERGSTIK® II	BERGSTIK®	BERGSTIK®	BERGSTIK®	BERGSTIK® II	BERGSTIK® II	892	892	A1
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Header, Breakaway	Header	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	30	30	30	30	30	30	30	30	30	30	30
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit, Solder	Solder	Solder	Solder	Solder	Solder	Kinked Pin, Solder	Kinked Pin, Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Tin	Gold or Gold, GXT™	Gold or Gold, GXT™	Tin	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold	Gold	Gold
Contact Material	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Brass	Brass	Brass
Current Rating	3A	Not specified	3A	3A per Contact	3A per Contact	3A per Contact	Not specified	Not specified	3A	3A	3A
Operating Temperature	-65°C ~ 105°C	Not specified	-65°C ~ 130°C	-65°C ~ 130°C	-65°C ~ 130°C	-65°C ~ 130°C	Not specified	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 85°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS non-compliant	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

For Legacy System Maintenance (RoHS Non-Compliant Acceptable):

The Amphenol ICC (FCI) BERGSTIK® series parts 77313-122-30LF, 77313-422-30LF, and 77313-822-30LF provide direct functional equivalence to the obsolete TE Connectivity 1-104433-5. These parts maintain RoHS non-compliant status consistent with the original component, feature identical pitch and position configuration, and support the same 3A current rating. The 77313-122-30LF and 77313-822-30LF variants offer gold-plated mating contacts matching the original specification, while 77313-422-30LF provides tin-plated contacts for cost-optimized applications. All three parts support operating temperatures up to 130°C, exceeding the original -65°C ~ 105°C range.

For New Designs with RoHS Compliance Requirements:

The Amphenol ICC (FCI) BERGSTIK® II series parts 68691-130HLF and 78548-130 are RoHS Compliant alternatives that maintain full electrical and mechanical compatibility. Both parts feature 30 positions in 2-row configuration with 0.100" (2.54mm) pitch, 3A current rating, and extended operating temperature range to 130°C. The 68691-130HLF is packaged in bags and features gold-plated mating contacts, while 78548-130 is bulk-packaged with kinked pin termination for enhanced board retention.

For Alternative Manufacturer Sourcing:

Preci-Dip 892-18-030-10-001101 and 892-18-030-10-002101 provide ROHS3 Compliant alternatives with identical connector geometry and 3A current rating. These parts feature brass contacts with gold plating and support operating temperatures from -55°C ~ 125°C. The primary distinction between these variants is contact length, with 892-18-030-10-001101 providing 0.236" (6.00mm) mating contact length and 892-18-030-10-002101 providing 0.276" (7.00mm) mating contact length.

Hirose Electric A1-30PA-2.54DSA(71) offers RoHS Compliant functionality with identical 30-position, 2-row configuration and 3A current rating. This part features brass contacts with gold plating and operates across -55°C ~ 85°C temperature range, which is narrower than the original specification but suitable for standard industrial applications.

Compliance and Inventory Considerations:

All substitute parts maintain UL94 V-0 flammability rating and Moisture Sensitivity Level 1 (Unlimited) classification. Current inventory levels across substitute parts range from 725 to 1159 units, providing adequate sourcing availability. Selection between RoHS compliant and non-compliant alternatives depends on end-application regulatory requirements and design phase (legacy maintenance versus new product development).

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a different contact finish (gold versus tin) in my application?

A: Yes. Both gold and tin contact finishes are acceptable for the 0.100" (2.54mm) pitch rectangular connector category at signal-level current ratings (3A). Contact finish selection does not affect mechanical compatibility or electrical performance in standard board-to-board or cable applications. Selection between gold and tin finishes is driven by cost optimization and specific environmental exposure requirements rather than functional compatibility.

Q: What is the difference between BERGSTIK® and BERGSTIK® II series parts?

A: Both series maintain identical electrical and mechanical specifications for 30-position, 2-row, 0.100" (2.54mm) pitch connectors. The primary differences are in contact material composition and termination options. BERGSTIK® II parts feature kinked pin termination for enhanced mechanical retention on printed circuit boards, while BERGSTIK® parts use standard solder termination. Both series support identical current ratings and operating temperature ranges.

Q: Are the Amphenol, Preci-Dip, and Hirose parts truly interchangeable with the original TE Connectivity 1-104433-5?

A: Yes, for applications requiring identical connector geometry and electrical performance. All substitute parts maintain 30 positions in 2-row configuration with 0.100" (2.54mm) pitch spacing, male pin contacts, through-hole mounting, and push-pull fastening. Mechanical fit and electrical function are preserved across all listed substitutes. The primary selection criteria are product status (active versus obsolete), RoHS compliance requirements, and packaging format (bulk, bag, or tray).

Q: Does the operating temperature range difference between substitutes affect compatibility?

A: No. All substitute parts specify operating temperature ranges that either match or exceed the original -65°C ~ 105°C specification. The Amphenol BERGSTIK® II and Preci-Dip 892 series parts extend to 130°C and 125°C respectively, providing enhanced thermal margin. The Hirose A1 series operates to 85°C maximum, which is narrower than the original but remains suitable for standard industrial temperature environments. Selection based on operating temperature is application-specific rather than a compatibility constraint.

Q: What is the significance of RoHS Compliant versus RoHS non-compliant status?

A: RoHS Compliance indicates the part does not contain restricted substances (lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers) above specified thresholds. For legacy system maintenance and repair, RoHS non-compliant substitutes (Amphenol BERGSTIK® series 77313 variants and 78548 variants) are functionally equivalent to the original obsolete part. For new product designs, RoHS Compliant alternatives (Amphenol BERGSTIK® II series 68691, Preci-Dip 892 series, and Hirose A1 series) are required to meet current regulatory requirements in most markets.

Q: How do I determine which substitute part is best for my specific application?

A: Selection is based on four primary criteria: (1) RoHS compliance requirement (legacy maintenance allows non-compliant; new designs require compliant), (2) contact finish preference (gold for enhanced corrosion resistance; tin for cost optimization), (3) packaging format availability (bulk, bag, or tray), and (4) operating temperature range requirement. All listed substitutes maintain identical connector geometry, position count, pitch spacing, and current rating, ensuring mechanical and electrical compatibility with the original 1-104433-5.

Q: Are there any termination differences I should consider when selecting a substitute?

A: The original TE Connectivity 1-104433-5 supports both press-fit and solder termination. Most substitute parts specify solder termination only, with the exception of Amphenol BERGSTIK® II series 78548 variants, which feature kinked pin termination combined with solder. Kinked pin termination provides enhanced mechanical retention on printed circuit boards but does not affect electrical performance or mating compatibility. Selection between standard solder and kinked pin termination is driven by board assembly process requirements rather than connector functionality.

Q: What inventory levels are available for substitute parts?

A: Current inventory across all substitute parts ranges from 725 to 1159 units. Amphenol ICC (FCI) BERGSTIK® series 77313-122-30LF maintains 1033 units in stock. Amphenol ICC (FCI) BERGSTIK® II series 68691-130HLF maintains 904 units. Preci-Dip 892-18-030-10-002101 maintains 1034 units. Hirose Electric A1-30PA-2.54DSA(71) maintains 1159 units. All substitute parts are classified as active products with ongoing manufacturing support, ensuring long-term sourcing availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message