TE Connectivity AMP Connectors 1-104074-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-104074-7 is a rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This connector features 40 positions at 0.050" (1.27mm) pitch within the AMPMODU System 50 series. The part is classified as Active product status and is suitable for automotive, general purpose, medical, and telecommunications applications.

Substitute parts are identified to address inventory availability, compliance requirements, or manufacturing continuity needs while maintaining electrical and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

1-104074-7

TE Connectivity AMP ConnectorsIn Stock: 8131-104074-7 Datasheet

Current PartRFQ

6-104074-7

TE Connectivity AMP ConnectorsIn Stock: 10206-104074-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between 1-104074-7 and 6-104074-7 is based on identical electrical and mechanical parameters across all critical connector specifications. Both parts share the same base product number (104074) and maintain compatibility through the following key parameters:

Electrical Compatibility:

• Identical pitch specification: 0.050" (1.27mm)
• Identical voltage rating: 30VAC
• Identical contact type: Male Pin
• Identical contact shape: Circular
• Identical contact material: Copper Alloy

Mechanical Compatibility:

• Identical number of positions: 40
• Identical number of rows: 1
• Identical mounting type: Through Hole, Right Angle
• Identical shrouding: Shrouded - 2 Wall
• Identical termination method: Solder
• Identical contact dimensions: Mating length 0.125" (3.18mm), Post length 0.100" (2.54mm)
• Identical insulation height: 0.190" (4.83mm)
• Identical insulation material: Thermoplastic
• Identical operating temperature range: -65°C ~ 105°C
• Identical flammability rating: UL94 V-0

Series Compatibility:

• Both parts belong to AMPMODU System 50 series
• Both parts are Active product status

The primary difference between these parts is the contact finish on the post: the main part 1-104074-7 uses Tin-Lead finish, while substitute 6-104074-7 uses Tin finish. Both finishes meet the specified 150.0µin (3.81µm) thickness requirement. Additionally, 6-104074-7 carries ROHS3 compliance status, whereas 1-104074-7 is RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

Both 1-104074-7 and 6-104074-7 are Active product status connectors from TE Connectivity AMP Connectors within the AMPMODU System 50 series. These parts are electrically and mechanically interchangeable based on identical connector specifications, contact configurations, and operating parameters.

Compliance Considerations:

The substitute part 6-104074-7 carries ROHS3 compliance certification, whereas the main part 1-104074-7 is RoHS non-compliant. Applications subject to RoHS3 regulatory requirements should utilize 6-104074-7. The contact finish difference (Tin-Lead versus Tin) does not affect electrical performance or mechanical compatibility, as both finishes meet the specified thickness requirements and are suitable for solder termination applications.

Both parts maintain identical electrical ratings (30VAC), thermal operating range (-65°C ~ 105°C), and flammability certification (UL94 V-0), confirming suitability for automotive, general purpose, medical, and telecommunications applications.

Frequently Asked Questions (FAQ)

Q: Are 1-104074-7 and 6-104074-7 mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications including 40-position configuration, 0.050" (1.27mm) pitch, through-hole right-angle mounting, shrouded 2-wall design, and contact dimensions. They are directly interchangeable in board layouts and mechanical assemblies.

Q: What is the difference between Tin-Lead and Tin contact finishes on the post?

A: The main part 1-104074-7 uses Tin-Lead finish while substitute 6-104074-7 uses Tin finish on the post contacts. Both finishes meet the specified 150.0µin (3.81µm) thickness requirement and are compatible with solder termination processes. The finish difference does not affect electrical performance or mechanical compatibility.

Q: Which part should be selected for RoHS-compliant applications?

A: Part 6-104074-7 carries ROHS3 compliance certification and is the appropriate selection for applications requiring RoHS compliance. Part 1-104074-7 is RoHS non-compliant and should not be used in RoHS-regulated applications.

Q: Are the electrical ratings identical between these parts?

A: Yes. Both parts maintain identical voltage rating (30VAC), operating temperature range (-65°C ~ 105°C), contact material (Copper Alloy), and contact finish on mating surfaces (Gold, 30.0µin thickness). Electrical performance is equivalent.

Q: What is the packaging format for both parts?

A: Both 1-104074-7 and 6-104074-7 are supplied in Tube packaging. Inventory availability differs: 1-104074-7 has 798 pieces in stock, while 6-104074-7 has 1005 pieces in stock.

Q: Can these connectors be used in automotive applications?

A: Yes. Both parts are rated for automotive applications along with general purpose, medical, and telecommunications use. Both maintain UL94 V-0 flammability certification and the specified operating temperature range suitable for automotive environments.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.