TE Connectivity AMP Connectors 1-103653-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-103653-2 is a 13-position rectangular connector housing designed for plug applications with 0.100" (2.54mm) pitch spacing. This connector belongs to the AMPMODU MTE series and features male pin contact termination with crimp fastening and latch holder retention. The part is classified as Active product status and is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent rectangular connectors share identical or compatible electrical and mechanical parameters, including connector type, contact configuration, pitch spacing, mounting methodology, and operating temperature ranges within acceptable tolerances.

Key Parameters

Parameter	Specification
Connector Type	Plug
Contact Type	Male Pin
Number of Positions	13
Pitch	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Free Hanging (In-Line)
Contact Termination	Crimp
Fastening Type	Latch Holder
Color	Black
Operating Temperature Range	-65°C ~ 105°C
RoHS Status	RoHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1-103653-2 are identified based on parametric equivalence across the following critical parameters:

Electrical Parameters:

Connector type (Plug)
Contact type (Male Pin)
Number of positions (13)
Pitch spacing (0.100" / 2.54mm)
Row configuration (1 row)

Mechanical Parameters:

Mounting type (Free Hanging / In-Line)
Contact termination method (Crimp)
Fastening mechanism (Latch Holder)
Housing color (Black)

Environmental & Compliance Parameters:

Operating temperature range compatibility
RoHS3 compliance status
Moisture sensitivity level (MSL 1)

The Molex 0701070012 connector housing qualifies as a parametric equivalent substitute based on matching all electrical and mechanical parameters. Variations in insulation material composition and specific operating temperature floor do not preclude substitution when the upper temperature limit and all functional parameters remain compatible.

Parameter Comparison

Parameter	TE Connectivity 1-103653-2	Molex 0701070012	Compatibility Status
Connector Type	Plug	Plug	Equivalent
Contact Type	Male Pin	Male Pin	Equivalent
Number of Positions	13	13	Equivalent
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Equivalent
Number of Rows	1	1	Equivalent
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Equivalent
Contact Termination	Crimp	Crimp	Equivalent
Fastening Type	Latch Holder	Latch Holder	Equivalent
Color	Black	Black	Equivalent
Operating Temperature (Upper Limit)	105°C	105°C	Equivalent
RoHS Status	RoHS3 Compliant	RoHS3 Compliant	Equivalent
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Equivalent

Engineering Selection Recommendations

Both the TE Connectivity 1-103653-2 and Molex 0701070012 rectangular connector housings maintain Active product status and full RoHS3 compliance certification. Selection between these parts is determined by availability, supply chain requirements, and inventory positioning rather than functional or compliance differentiation.

The TE Connectivity 1-103653-2 operates across a wider temperature floor range (-65°C versus -40°C), providing extended low-temperature performance capability. The Molex 0701070012 features polyester glass-filled insulation material compared to the liquid crystal polymer (LCP) composition of the TE part, with no impact on the specified operating temperature ceiling or electrical performance parameters.

Both connectors are classified as MSL 1 (Unlimited) moisture sensitivity, indicating no moisture sensitivity restrictions during storage, handling, or assembly operations. Selection should prioritize part availability and established supplier relationships while maintaining equivalence across all critical electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0701070012 directly replace the TE Connectivity 1-103653-2 in existing designs?

A: Yes. Both connectors share identical electrical and mechanical parameters including 13-position configuration, 0.100" (2.54mm) pitch, male pin contact type, crimp termination, and latch holder fastening. Physical form factor and mating interface compatibility are equivalent.

Q: What is the significance of the different insulation materials (LCP versus polyester glass-filled)?

A: The insulation material composition does not affect connector functionality, electrical performance, or operating temperature limits within the specified range. Both materials support the 105°C upper operating temperature and maintain RoHS3 compliance.

Q: Does the operating temperature range difference (-65°C to 105°C versus -40°C to 105°C) affect substitution suitability?

A: The TE Connectivity part provides extended low-temperature performance to -65°C. For applications requiring operation below -40°C, the TE Connectivity 1-103653-2 is required. For applications within -40°C to 105°C range, both parts are functionally equivalent.

Q: Are contacts included with these connector housings?

A: No. Both the TE Connectivity 1-103653-2 and Molex 0701070012 are connector housings only. Contacts must be sourced separately and are not included in the package.

Q: What is the significance of MSL 1 (Unlimited) classification?

A: MSL 1 rating indicates no moisture sensitivity restrictions. These connectors do not require special moisture control during storage, handling, or assembly operations and can be stored in standard industrial environments without desiccant packaging requirements.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the TE Connectivity 1-103653-2 and Molex 0701070012 maintain full RoHS3 compliance certification, meeting all restricted substance requirements for electronic component manufacturing and assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message