TE Connectivity AMP Connectors 1-102162-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-102162-2 is a rectangular connector header designed for through-hole, right-angle mounting applications. This shrouded 64-position connector operates at 0.100" (2.54mm) pitch and supports board-to-cable/wire interconnections with a 1A per contact current rating at 250VAC. The part is classified as Active product status and is currently in stock with 965 units available. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector interface, allowing for component interchangeability in applications where specific compliance or material specifications require alternative sourcing.

Substiute Parts

1-102162-2

TE Connectivity AMP ConnectorsIn Stock: 10471-102162-2 Datasheet

Current PartRFQ

1-5102162-2

TE Connectivity AMP ConnectorsIn Stock: 8141-5102162-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the main part 1-102162-2 and the equivalent part 1-5102162-2 is determined by strict alignment of electrical and mechanical parameters. Both connectors maintain identical specifications across all critical mating and functional characteristics: 64-position configuration, 2-row layout, 0.100" (2.54mm) pitch, through-hole right-angle mounting, shrouded 4-wall design, 1A per contact current rating, and 250VAC voltage rating. The operating temperature range of -65°C to 105°C is preserved across both parts. Contact geometry, including mating contact length of 0.240" (6.10mm) and post length of 0.155" (3.94mm), remains constant. The key parameters enabling substitution are: connector type (Header), contact type (Male Pin), position count (64), row configuration (2), pitch specification (0.100"), mounting method (Through Hole, Right Angle), shrouding style (Shrouded - 4 Wall), and electrical ratings (1A, 250VAC). Variations in contact finish post material and RoHS compliance status do not affect functional interchangeability in the connector interface.

Parameter Comparison

Engineering Selection Recommendations

Both the 1-102162-2 and 1-5102162-2 are Active product status connectors from TE Connectivity AMP Connectors and are functionally equivalent for board-to-cable/wire interconnection applications requiring 64-position, 2.54mm pitch headers with right-angle through-hole mounting.

The 1-102162-2 carries REACH Affected status with Not applicable RoHS classification, reflecting its original design specification. The 1-5102162-2 is ROHS3 Compliant and REACH Unaffected, indicating compliance with current environmental regulations. The contact finish post material differs between the two parts: the main part uses Tin-Lead, while the substitute uses Tin. Both finishes maintain the specified 100.0µin (2.54µm) thickness and support the same electrical and thermal performance requirements.

Selection between these parts is determined by regulatory compliance requirements and material specifications applicable to the end application. Both connectors support identical electrical ratings (1A per contact, 250VAC), operating temperature range (-65°C to 105°C), and mechanical configuration. Inventory availability is 965 units for 1-102162-2 and 724 units for 1-5102162-2.

Frequently Asked Questions (FAQ)

Q: Are the 1-102162-2 and 1-5102162-2 connectors mechanically interchangeable?

A: Yes. Both connectors maintain identical mechanical specifications including 64-position configuration, 2-row layout, 0.100" (2.54mm) pitch, through-hole right-angle mounting, and shrouded 4-wall design. Mating contact geometry, post dimensions, and insulation height are identical across both parts.

Q: What is the difference between the contact finish post materials?

A: The 1-102162-2 uses Tin-Lead contact finish on the post, while the 1-5102162-2 uses Tin. Both finishes are applied at 100.0µin (2.54µm) thickness. The mating contact finish remains Gold or Gold-Palladium at 30.0µin (0.76µm) for both parts.

Q: Do both parts support the same electrical ratings?

A: Yes. Both connectors are rated for 1A per contact and 250VAC. Operating temperature range is -65°C to 105°C for both parts.

Q: What is the significance of the RoHS and REACH compliance differences?

A: The 1-102162-2 is Not applicable for RoHS and REACH Affected. The 1-5102162-2 is ROHS3 Compliant and REACH Unaffected. Selection depends on regulatory requirements applicable to the end application and geographic market.

Q: Are the keying and mounting features identical?

A: Yes. Both connectors include Keying Slot and Mounting Flange features. Push-Pull fastening type is identical for both parts.

Q: What is the current inventory status for each part?

A: The 1-102162-2 has 965 units in stock. The 1-5102162-2 has 724 units in stock. Both are classified as New Original.

Q: Can these connectors be used in applications requiring UL94 V-0 flammability rating?

A: Yes. Both the 1-102162-2 and 1-5102162-2 meet UL94 V-0 material flammability rating.

Q: What is the moisture sensitivity level for these connectors?

A: Both connectors have Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions.