Equivalent & Substitute Parts for 1101M2S6CPE2

Part Overview

The 1101M2S6CPE2 is an SPDT slide switch manufactured by C&K, rated for 0.4VA at 20V AC/DC. This through-hole component features a gold-plated copper contact system with an epoxy-sealed design, suitable for applications requiring low-power switching in the -30°C to 65°C operating range. The part is Active status and ROHS3 compliant, with an electrical life rating of 100,000 cycles. Substitute parts are identified when equivalent switching functionality can be achieved within the allowed electrical and mechanical parameters of the application.

Substiute Parts

1101M2S6CPE2

C&KIn Stock: 8401101M2S6CPE2 Datasheet

Current PartRFQ

500SSP1S2M2QEA

E-SwitchIn Stock: 3310500SSP1S2M2QEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 500SSP1S2M2QEA from E-Switch qualifies as a substitute based on the following alignment of critical parameters:

• Circuit Configuration: Both parts are SPDT with On-On switch function
• Mounting and Termination: Both use through-hole mounting with PC pin termination
• Contact System: Both feature copper-based contacts with epoxy-sealed terminals
• Actuator Design: Both use polyamide (nylon) actuators with identical 2.16mm switch travel
• Compliance: Both are ROHS3 compliant and REACH unaffected
• Electrical Performance: The substitute part exceeds the main part's current and voltage ratings, making it suitable for applications within the 1101M2S6CPE2 specification envelope

Parameter Comparison

Engineering Selection Recommendations

Both the 1101M2S6CPE2 and 500SSP1S2M2QEA are Active status components with ROHS3 compliance and REACH unaffected certification. The 500SSP1S2M2QEA provides higher current and voltage ratings, making it suitable for applications operating within the 1101M2S6CPE2 electrical envelope. The main part offers superior electrical life (100,000 cycles versus 30,000 cycles), which should be considered for high-cycle applications. Both parts maintain identical mechanical characteristics including switch travel and actuator material, ensuring compatible PCB footprints and mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can the 500SSP1S2M2QEA replace the 1101M2S6CPE2 in all applications?

A: The 500SSP1S2M2QEA is electrically compatible for applications operating within the 1101M2S6CPE2 ratings (0.4VA at 20V). The substitute part's higher ratings provide design margin. However, the main part's superior electrical life (100,000 cycles) should be verified against application cycle requirements.

Q: Are the PCB footprints identical between these parts?

A: Both parts use through-hole PC pin termination with identical 2.16mm switch travel and polyamide actuators. Mechanical compatibility is confirmed for standard SPDT slide switch footprints.

Q: What are the key differences between these parts?

A: The primary differences are current rating (0.4VA versus 5A), voltage rating (20V versus 120V AC), and electrical life (100,000 versus 30,000 cycles). The substitute part operates across a wider temperature range (-30°C to 85°C versus -30°C to 65°C).

Q: Are both parts RoHS compliant?

A: Yes, both the 1101M2S6CPE2 and 500SSP1S2M2QEA are ROHS3 compliant and REACH unaffected.