Equivalent & Substitute Parts for C&K 1101M2S3AME2 Slide Switch

Part Overview

The C&K 1101M2S3AME2 is a slide switch with Single Pole Double Throw (SPDT) configuration, rated for 6A at 120V AC and 28V DC. This component features through-hole, right-angle mounting with PC pin termination and is designed for On-On switching applications. The part is classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and ensure ongoing component availability for production and repair applications.

Substiute Parts

1101M2S3AME2

C&KIn Stock: 11521101M2S3AME2 Datasheet

Current PartRFQ

1101M2S3ASE2

C&KIn Stock: 8921101M2S3ASE2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The C&K 1101M2S3ASE2 qualifies as a direct substitute for the 1101M2S3AME2 based on the following critical parameters that determine functional equivalence:

Electrical Parameters:

• Identical SPDT circuit configuration
• Matching current rating of 6A (AC/DC)
• Identical voltage ratings: 120V AC and 28V DC
• Identical switch function: On-On
• Identical electrical life rating: 40,000 cycles

Mechanical Parameters:

• Identical mounting type: Through Hole, Right Angle
• Identical termination style: PC Pin
• Identical actuator type and length: Standard, 4.72mm
• Identical switch travel: 2.16mm
• Identical contact material and finish: Copper with Silver plating

Environmental Parameters:

• Identical operating temperature range: -30°C to 65°C
• Identical moisture sensitivity level: 1 (Unlimited)
• Both components belong to the C&K 1000 series

Compliance Parameters:

• Both components meet RoHS requirements
• Substitute part carries active product status with ROHS3 compliance and REACH Unaffected designation

Parameter Comparison

Engineering Selection Recommendations

The C&K 1101M2S3ASE2 is the appropriate substitute for the obsolete 1101M2S3AME2. Selection is based on the following engineering criteria:

Functional Equivalence: All electrical and mechanical parameters are identical between the main part and substitute, ensuring direct functional replacement without circuit redesign or PCB modification.

Product Status: The substitute part carries active product status, providing assured long-term availability and supply chain continuity. The main part's obsolete classification creates supply risk and potential discontinuation of manufacturing.

Compliance Enhancement: The substitute part meets ROHS3 compliance standards, representing an advancement over the RoHS Compliant designation of the main part. Both components maintain identical moisture sensitivity levels and environmental operating ranges.

Certification and Regulatory: The substitute part carries REACH Unaffected status and EAR99 ECCN classification, providing clear regulatory positioning for international applications. The HTSUS code 8536.50.9050 confirms proper tariff classification for customs and trade purposes.

Inventory and Availability: While the main part shows 1114 units in stock, the substitute maintains active inventory of 803 units with ongoing manufacturing support, ensuring component availability for current and future production requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1101M2S3ASE2 be used as a direct replacement for the 1101M2S3AME2 without circuit modifications?

A: Yes. The substitute part maintains identical electrical ratings (6A at 120V AC/28V DC), circuit configuration (SPDT), and mechanical specifications (through-hole, right-angle mounting with PC pin termination). No circuit redesign or PCB layout changes are required.

Q: What is the difference between the two part numbers?

A: The primary difference is product status. The 1101M2S3AME2 is obsolete, while the 1101M2S3ASE2 is active. The substitute includes black actuator coloring and epoxy sealed terminals as distinguishing features. Both parts share the same base product number 1101M2S3 and belong to the C&K 1000 series.

Q: Are there packaging differences between these parts?

A: The main part is specified with a dash packaging designation, while the substitute is supplied in bulk packaging. Bulk packaging is standard for active production components and does not affect electrical or mechanical performance.

Q: Do both parts meet current RoHS requirements?

A: Yes. The main part carries RoHS Compliant status, and the substitute carries ROHS3 Compliant status. Both designations confirm compliance with Restriction of Hazardous Substances regulations. The ROHS3 designation on the substitute represents current regulatory alignment.

Q: What is the electrical life expectancy for these switches?

A: Both the main part and substitute are rated for 40,000 electrical cycles, providing identical operational longevity under specified switching conditions.

Q: Are the operating temperature ranges identical?

A: Yes. Both parts operate across the identical temperature range of -30°C to 65°C, ensuring equivalent thermal performance in target applications.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: Moisture Sensitivity Level 1 indicates the lowest moisture sensitivity classification. Both parts can be stored and handled without special moisture control measures, providing simplified inventory and logistics management.

Q: Is the substitute part suitable for international applications?

A: Yes. The substitute part carries REACH Unaffected status, confirming compliance with European chemical regulations. The EAR99 ECCN classification indicates the part is not subject to export control restrictions for most international markets.