10GENG3E-R Equivalent & Substitute Parts

Part Overview

The 10GENG3E-R is an AC power entry connector receptacle manufactured by Delta Electronics, designed for IEC 320-C14 panel mount applications. This filtered power entry connector accommodates male blade terminations with quick connect capability and is rated for 10A at 115/250VAC. The product is currently active and widely used in commercial equipment requiring EMI/RFI filtering. Substitute parts may be required due to inventory availability, lead time considerations, or specific packaging requirements for manufacturing operations.

Substiute Parts

10GENG3E-R

Delta ElectronicsIn Stock: 112510GENG3E-R Datasheet

Current PartRFQ

869-10/008

QualtekIn Stock: 4003869-10/008 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 869-10/008 manufactured by Qualtek qualifies as a direct substitute for the 10GENG3E-R based on the following critical parameters:

• Identical connector style (IEC 320-C14) and type (Receptacle, Male Blades)
• Matching current and voltage ratings (10A, 115/250VAC)
• Identical number of positions (3)
• Equivalent filter type and current rating (Filtered EMI/RFI, 10A)
• Identical mounting configuration (Panel Mount, Snap-In)
• Matching termination method (Quick Connect)
• Compatible panel cutout dimensions (28.45mm x 21.89mm, within tolerance)
• Overlapping panel thickness accommodation (1.02mm ~ 1.60mm range includes the 0.81mm ~ 1.60mm requirement)
• Equivalent regulatory approvals (CSA, UL, VDE)
• Equivalent environmental compliance (ROHS3 Compliant, REACH Unaffected)

Parameter Comparison

Engineering Selection Recommendations

Both the 10GENG3E-R and 869-10/008 are active products with equivalent regulatory certifications (CSA, UL, VDE) and environmental compliance status (ROHS3 Compliant, REACH Unaffected). Selection between these parts should be based on:

• Inventory availability and lead time requirements
• Packaging format preference (Bulk for 10GENG3E-R versus Tray for 869-10/008)
• Panel thickness specifications for the target application (note the 869-10/008 minimum panel thickness of 1.02mm versus 0.81mm for the 10GENG3E-R)
• Cost considerations and supply chain logistics

Both connectors meet identical electrical and mechanical specifications for IEC 320-C14 panel mount applications with 10A filtering capability.

Frequently Asked Questions (FAQ)

Q: Can the 869-10/008 be used as a direct replacement for the 10GENG3E-R?

A: Yes. Both connectors share identical connector style, electrical ratings, filtering specifications, mounting configuration, and regulatory approvals. The panel cutout dimensions are within tolerance (28.45mm x 21.89mm versus 28.45mm x 21.90mm).

Q: Are there panel thickness compatibility differences?

A: The 869-10/008 accommodates panel thickness from 1.02mm to 1.60mm, while the 10GENG3E-R accommodates 0.81mm to 1.60mm. For panels thinner than 1.02mm, the 10GENG3E-R is required. For panels within the 1.02mm to 1.60mm range, both are compatible.

Q: What is the difference in packaging between these parts?

A: The 10GENG3E-R is supplied in Bulk packaging, while the 869-10/008 is supplied in Tray packaging. This affects handling, storage, and integration into manufacturing processes but does not impact electrical or mechanical performance.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the 10GENG3E-R and 869-10/008 carry CSA, UL, and VDE approvals and are ROHS3 Compliant with REACH Unaffected status.

Q: What filtering capability do these connectors provide?

A: Both connectors provide commercial-grade EMI/RFI filtering rated at 10A, suitable for applications requiring power entry noise suppression.