10GENG3E Power Entry Connector Receptacle - Equivalent & Substitute Parts

Part Overview

The 10GENG3E is an IEC 320-C14 power entry connector receptacle manufactured by Delta Electronics. This panel-mount, snap-in connector is designed for AC power applications requiring filtered EMI/RFI protection at 10A, 115/250VAC. The component is actively produced and maintains full compliance with international standards including CSA, UL, and VDE certifications. Substitute parts are identified when equivalent functional specifications, connector geometry, and electrical ratings align with the original design requirements, enabling direct replacement in applications where component availability or supply chain considerations necessitate alternative sourcing.

Substiute Parts

10GENG3E

Delta ElectronicsIn Stock: 97510GENG3E Datasheet

Current PartRFQ

FN9222S-10-06

Schaffner EMC Inc.In Stock: 956FN9222S-10-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 10GENG3E is determined by strict alignment of the following critical parameters:

Electrical Compatibility: Current rating at filter stage (10A), voltage rating (115/250VAC), and connector style (IEC 320-C14) must match exactly. The three-position configuration and filtered EMI/RFI protection classification are non-negotiable functional requirements.

Mechanical Compatibility: Panel mount, snap-in mounting type and quick connect termination are mandatory. Panel cutout dimensions and panel thickness tolerance ranges must accommodate the original design envelope.

Regulatory Compliance: RoHS3 compliance and international approval certifications (CSA, UL, VDE minimum) ensure substitutes meet the same safety and environmental standards.

The FN9222S-10-06 qualifies as a direct substitute based on matching connector style, connector type, three-position configuration, 10A filter current rating, panel mount snap-in design, quick connect termination, and equivalent regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the 10GENG3E and FN9222S-10-06 maintain active production status and full ROHS3 compliance. The 10GENG3E carries CSA, UL, and VDE certifications, while the FN9222S-10-06 extends approval coverage to include CQC and ENEC in addition to CSA and UL. Both components satisfy the core electrical and mechanical requirements for IEC 320-C14 filtered power entry applications at 10A.

Panel cutout dimensions differ slightly between the two parts (28.45mm x 21.90mm versus 29.40mm x 20.80mm). Panel thickness tolerance ranges overlap substantially but are not identical. These geometric variations require verification against specific panel design specifications before final component selection. The FN9222S-10-06 includes IP40 ingress protection rating and UL94 V-2 material flammability rating, which are not specified for the 10GENG3E.

Frequently Asked Questions (FAQ)

Q: Can the FN9222S-10-06 directly replace the 10GENG3E in existing designs?

A: Direct replacement is possible when panel cutout dimensions and thickness tolerances accommodate the FN9222S-10-06 specifications. The 29.40mm x 20.80mm cutout is slightly larger than the 10GENG3E requirement of 28.45mm x 21.90mm. Panel thickness tolerance ranges (0.70mm ~ 1.50mm for FN9222S-10-06 versus 0.81mm ~ 1.60mm for 10GENG3E) overlap but do not fully align. Mechanical fit verification is required.

Q: Are the electrical ratings identical between these two parts?

A: Both components provide 10A filtered current rating and are rated for 115/250VAC operation. The 10GENG3E explicitly specifies appliance inlet voltage and current ratings, while the FN9222S-10-06 does not document these parameters separately. Both deliver equivalent filtered EMI/RFI protection at the specified current level.

Q: What are the key differences in certifications?

A: The 10GENG3E holds CSA, UL, and VDE approvals. The FN9222S-10-06 adds CQC and ENEC certifications while maintaining CSA and UL. Both meet international safety standards; the FN9222S-10-06 provides broader geographic regulatory coverage.

Q: Does packaging format affect substitution eligibility?

A: The 10GENG3E is supplied in bulk packaging, while the FN9222S-10-06 uses tray packaging. Packaging format does not affect electrical or mechanical compatibility but may influence procurement logistics and handling procedures.

Q: What is the significance of the IP40 rating on the FN9222S-10-06?

A: IP40 ingress protection indicates the FN9222S-10-06 provides protection against solid objects larger than 1mm and is not protected against liquid ingress. This specification is not provided for the 10GENG3E. Applications requiring specific environmental protection levels should confirm compatibility with design requirements.