Equivalent & Substitute Parts for 10ETS12

Part Overview

The 10ETS12 is a general-purpose rectifier diode rated for 1200 V DC reverse voltage and 10 A average rectified current in a TO-220AC through-hole package. Manufactured by Vishay General Semiconductor - Diodes Division, this component is classified as obsolete. Due to its obsolete status and limited availability from original sources, equivalent and substitute parts are necessary for ongoing design support and production continuity. Active alternatives with identical or enhanced electrical characteristics are available from Vishay and other manufacturers.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	1200	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 10 A	V
Speed	Standard Recovery >500ns, > 200mA (Io)	—
Current - Reverse Leakage @ Vr	50	µA @ 1200 V
Mounting Type	Through Hole	—
Package / Case	TO-220-2	—
Operating Temperature - Junction	-40 to 150	°C
RoHS Status	RoHS non-compliant	—

Substitute Part Grouping Explanation

Substitution of the 10ETS12 is determined by the following critical parameters: voltage rating (1200 V DC reverse), current rating (10 A average rectified), forward voltage characteristics, recovery speed classification, mounting type (through-hole), and package form factor (TO-220-2). Substitute parts must maintain electrical compatibility within these specifications.

The substitute parts are grouped into two categories:

Parametric Equivalents maintain identical electrical specifications and are direct replacements:

VS-10ETS12-M3
VS-10ETS12THM3

Manufacturer Recommended Alternatives provide enhanced or modified electrical characteristics while maintaining voltage and package compatibility:

IDP30E120XKSA1 (higher current rating, fast recovery)
STTH1210D (lower voltage rating, higher current rating, fast recovery)
STTH812D (lower current rating, fast recovery)

Parameter Comparison

Parameter	10ETS12	VS-10ETS12-M3	VS-10ETS12THM3	IDP30E120XKSA1	STTH1210D	STTH812D
Manufacturer	Vishay	Vishay	Vishay	Infineon	STMicroelectronics	STMicroelectronics
Voltage - DC Reverse (Vr) (Max)	1200 V	1200 V	1200 V	1200 V	1000 V	1200 V
Current - Average Rectified (Io)	10 A	10 A	10 A	50 A	12 A	8 A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 10 A	1.1 V @ 10 A	1.1 V @ 10 A	2.15 V @ 30 A	2 V @ 12 A	2.2 V @ 8 A
Speed	Standard >500ns	Standard >500ns	Standard >500ns	Fast ≤500ns	Fast ≤500ns	Fast ≤500ns
Current - Reverse Leakage @ Vr	50 µA @ 1200 V	50 µA @ 1200 V	50 µA @ 1200 V	100 µA @ 1200 V	10 µA @ 1000 V	8 µA @ 1200 V
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	TO-220-2	TO-220-2	TO-220-2	TO-220-2	TO-220-2	TO-220-2
Operating Temperature - Junction	-40 to 150°C	-40 to 150°C	-40 to 150°C	-55 to 150°C	Max 175°C	Max 175°C
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance):

VS-10ETS12-M3 and VS-10ETS12THM3 are parametric equivalents to the 10ETS12, maintaining all electrical specifications including 1200 V reverse voltage, 10 A current rating, and standard recovery speed. Both parts are active products with ROHS3 compliance. VS-10ETS12THM3 includes AEC-Q101 automotive qualification. These parts are recommended for applications requiring exact electrical equivalence with improved product status and regulatory compliance.

For Enhanced Performance Applications:

IDP30E120XKSA1 (Infineon) provides 50 A current capacity with fast recovery characteristics while maintaining 1200 V voltage rating. This part is suitable for applications requiring higher current handling within the same voltage class.

STTH1210D (STMicroelectronics) offers 12 A current capacity with fast recovery and operates at 1000 V reverse voltage. This part is applicable for applications where voltage requirements are 1000 V or lower.

STTH812D (STMicroelectronics) provides 8 A current capacity with fast recovery and 1200 V voltage rating. This part is suitable for applications with lower current requirements than the original 10ETS12.

All substitute parts maintain TO-220-2 package compatibility and through-hole mounting configuration. Selection should be based on specific application voltage and current requirements, recovery speed characteristics, and regulatory compliance needs.

Frequently Asked Questions (FAQ)

Q: Can VS-10ETS12-M3 be used as a direct replacement for 10ETS12?

A: Yes. VS-10ETS12-M3 is a parametric equivalent with identical voltage rating (1200 V), current rating (10 A), forward voltage (1.1 V @ 10 A), and recovery speed characteristics. The primary differences are product status (active vs. obsolete) and RoHS compliance (ROHS3 vs. non-compliant).

Q: What is the difference between VS-10ETS12-M3 and VS-10ETS12THM3?

A: Both parts are parametric equivalents with identical electrical specifications. VS-10ETS12THM3 includes AEC-Q101 automotive qualification and is designated for automotive-grade applications. Selection depends on application requirements for automotive qualification.

Q: Can IDP30E120XKSA1 replace 10ETS12 in all applications?

A: IDP30E120XKSA1 maintains 1200 V voltage compatibility but provides 50 A current capacity compared to 10 A in the original part. Forward voltage is higher (2.15 V @ 30 A vs. 1.1 V @ 10 A) and recovery speed is fast (≤500ns vs. standard >500ns). This part is suitable only for applications where higher current capacity and fast recovery are acceptable or beneficial.

Q: What are the implications of switching from standard recovery to fast recovery diodes?

A: Fast recovery diodes (STTH series, IDP30E120XKSA1) have reverse recovery times of 90-243 ns compared to >500 ns for standard recovery. Fast recovery reduces switching losses and electromagnetic interference but may increase forward voltage drop. Selection depends on circuit switching frequency and thermal management requirements.

Q: Are all substitute parts available in the same TO-220-2 package?

A: Yes. All substitute parts listed use TO-220-2 package form factor with through-hole mounting, ensuring mechanical and thermal interface compatibility with the original 10ETS12.

Q: Which substitute part has the best RoHS compliance status?

A: All substitute parts (VS-10ETS12-M3, VS-10ETS12THM3, IDP30E120XKSA1, STTH1210D, STTH812D) are ROHS3 compliant. The original 10ETS12 is RoHS non-compliant.

Q: Can STTH812D be used where 10 A current is required?

A: STTH812D is rated for 8 A average rectified current, which is below the 10 A requirement of the original 10ETS12. This part is suitable only for applications with 8 A or lower current requirements.

Q: What is the operating temperature range difference between 10ETS12 and STTH series alternatives?

A: The 10ETS12 operates from -40°C to 150°C junction temperature. STTH1210D and STTH812D specify maximum junction temperature of 175°C, providing higher temperature margin. IDP30E120XKSA1 operates from -55°C to 150°C, providing lower temperature operation capability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message