Equivalent & Substitute Parts for 10ETS08S

Part Overview

The 10ETS08S is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 800 V DC reverse voltage and 10 A average rectified current in a surface mount TO-263AB (D2PAK) package. This component is classified as obsolete, necessitating identification of active equivalent parts for new designs and ongoing production requirements. The substitute part maintains identical electrical specifications and mechanical compatibility while offering current availability and updated compliance status.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	800	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	1.1 @ 10 A	V
Current - Reverse Leakage @ Vr	50 @ 800 V	µA
Speed	Standard Recovery >500ns, > 200mA (Io)	—
Package / Case	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB	—
Mounting Type	Surface Mount	—
Operating Temperature - Junction	-40 to 150	°C

Substitute Part Grouping Explanation

Substitution of the 10ETS08S with the VS-10ETS08S-M3 is based on electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical performance criteria: 800 V maximum reverse voltage, 10 A average rectified current, 1.1 V maximum forward voltage at 10 A, 50 µA reverse leakage current at 800 V, standard recovery speed characteristics, and TO-263AB surface mount package configuration. The operating temperature range of -40°C to 150°C junction temperature is maintained across both parts. The substitute part is the manufacturer-recommended equivalent, sharing the same base product number (10ETS08) and supplier device package designation. Substitution is valid for applications requiring these exact electrical and thermal parameters within the specified package form factor.

Parameter Comparison

Parameter	10ETS08S	VS-10ETS08S-M3	Match
Manufacturer	Vishay General Semiconductor - Diodes Division	Vishay General Semiconductor - Diodes Division	Yes
Category	Diodes, Rectifiers	Diodes, Rectifiers	Yes
Voltage - DC Reverse (Vr) (Max)	800 V	800 V	Yes
Current - Average Rectified (Io)	10 A	10 A	Yes
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 10 A	1.1 V @ 10 A	Yes
Current - Reverse Leakage @ Vr	50 µA @ 800 V	50 µA @ 800 V	Yes
Speed	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Yes
Package / Case	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB	Yes
Mounting Type	Surface Mount	Surface Mount	Yes
Operating Temperature - Junction	-40°C ~ 150°C	-40°C ~ 150°C	Yes
Technology	Standard	Standard	Yes
Product Status	Obsolete	Active	Different
RoHS Status	RoHS non-compliant	ROHS3 Compliant	Different

Engineering Selection Recommendations

The VS-10ETS08S-M3 is the manufacturer-recommended substitute for the obsolete 10ETS08S. Selection of the VS-10ETS08S-M3 is appropriate for applications requiring continued component supply and updated regulatory compliance. The substitute part maintains full electrical and mechanical compatibility with the original part specification. The VS-10ETS08S-M3 carries active product status and ROHS3 compliance, addressing supply chain continuity and environmental regulatory requirements. Both parts are manufactured by Vishay General Semiconductor - Diodes Division and share identical electrical performance characteristics, thermal operating range, and TO-263AB surface mount package configuration. The substitute part is available in tube packaging with higher inventory levels compared to the obsolete original part.

Frequently Asked Questions (FAQ)

Q: Can the VS-10ETS08S-M3 be used as a direct replacement for the 10ETS08S in existing designs?

A: Yes. The VS-10ETS08S-M3 is electrically and mechanically equivalent to the 10ETS08S. Both parts share identical voltage ratings (800 V), current ratings (10 A), forward voltage characteristics (1.1 V @ 10 A), reverse leakage specifications (50 µA @ 800 V), recovery speed characteristics, and TO-263AB surface mount package configuration. No circuit modifications are required.

Q: What is the difference between the 10ETS08S and VS-10ETS08S-M3?

A: The primary differences are product status and compliance certification. The 10ETS08S is obsolete and RoHS non-compliant, while the VS-10ETS08S-M3 is an active product with ROHS3 compliance. All electrical specifications and package form factors are identical.

Q: Are there any thermal or operating condition differences between these parts?

A: No. Both parts operate across the same junction temperature range of -40°C to 150°C and maintain identical thermal and electrical performance characteristics within this range.

Q: What packaging options are available for the substitute part?

A: The VS-10ETS08S-M3 is supplied in tube packaging, whereas the original 10ETS08S packaging type was not specified in the available data. Both parts use the TO-263AB (D2PAK) surface mount package configuration.

Q: Is the VS-10ETS08S-M3 suitable for new product designs?

A: Yes. The VS-10ETS08S-M3 is an active product with current manufacturer support and ROHS3 compliance, making it suitable for new designs requiring 800 V, 10 A general-purpose rectifier diodes in TO-263AB surface mount packages.

Q: What is the base product number relationship between these parts?

A: Both the 10ETS08S and VS-10ETS08S-M3 share the same base product number (10ETS08), indicating they are part of the same product family with identical core specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message