Equivalent & Substitute Parts for 10ETF06

Part Overview

The 10ETF06 is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 600 V DC reverse voltage and 10 A average rectified current in a TO-220AC through-hole package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The 10ETF06 operates across a junction temperature range of -40°C to 150°C and exhibits fast recovery characteristics with a reverse recovery time of 145 ns.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	1.2 @ 10 A	V
Reverse Recovery Time (trr)	145	ns
Current - Reverse Leakage @ Vr	100 @ 600 V	µA
Mounting Type	Through Hole	—
Package / Case	TO-220-2	—
Operating Temperature - Junction	-40 to 150	°C
Technology	Standard	—
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	—

Substitute Part Grouping Explanation

Substitution of the 10ETF06 is determined by the following critical parameters:

Voltage Rating (Vr): Substitute parts must maintain 600 V minimum reverse voltage rating to ensure equivalent voltage withstand capability
Current Rating (Io): Substitute parts must support 10 A average rectified current or higher to maintain or exceed current-handling capacity
Package Type: All substitutes must use TO-220-2 or TO-220AC through-hole packaging for mechanical and thermal compatibility
Recovery Characteristics: Substitute parts must maintain fast recovery technology (≤ 500ns) to preserve circuit performance
Temperature Range: Operating junction temperature must support the -40°C to 150°C range or exceed it

Substitute parts are grouped into two categories:

Parametric Equivalents maintain identical electrical specifications (600 V, 10 A) with improved product status and compliance certifications.

Manufacturer-Recommended Alternatives provide higher current ratings (12 A, 40 A) or lower current ratings (3 A, 5 A, 6 A) while maintaining 600 V voltage rating and TO-220AC packaging. These alternatives are suitable for applications where current requirements differ from the original 10 A specification.

Parameter Comparison

Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) [V]	trr [ns]	Ir @ Vr [µA]	Package	Temp Range [°C]	Product Status	RoHS Status
10ETF06	Vishay	600	10	1.2 @ 10A	145	100 @ 600V	TO-220-2	-40 to 150	Obsolete	Non-compliant
VS-10ETF06-M3	Vishay	600	10	1.2 @ 10A	200	100 @ 600V	TO-220-2	-40 to 150	Active	ROHS3 Compliant
VS-10ETF06THM3	Vishay	600	10	1.2 @ 10A	200	100 @ 600V	TO-220-2	-40 to 150	Active	ROHS3 Compliant
STTH12R06D	STMicroelectronics	600	12	2.9 @ 12A	45	45 @ 600V	TO-220-2	-40 to 175	Active	ROHS3 Compliant
STTH12R06DIRG	STMicroelectronics	600	12	2.9 @ 12A	45	45 @ 600V	TO-220-2 Insulated	-40 to 175	Active	ROHS3 Compliant
LXA06T600	Power Integrations	600	6	2.94 @ 6A	23	250 @ 600V	TO-220-2	-40 to 150	Active	RoHS Compliant
QH03TZ600	Power Integrations	600	3	3.0 @ 3A	9.8	250 @ 600V	TO-220-2	-40 to 150	Active	RoHS Compliant
LQA03TC600	Power Integrations	600	3	3.1 @ 3A	13	20 @ 600V	TO-220-2	-40 to 150	Active	RoHS Compliant
DHG5I600PA	IXYS	600	5	2.2 @ 5A	35	10 @ 600V	TO-220-2	-55 to 150	Active	ROHS3 Compliant
STTH506DTI	STMicroelectronics	600	5	3.6 @ 5A	25	6 @ 600V	TO-220-2 Insulated	-40 to 175	Active	ROHS3 Compliant
IDP40E65D2XKSA1	Infineon Technologies	650	40	2.3 @ 40A	75	40 @ 650V	TO-220-2	-40 to 175	Active	ROHS3 Compliant

Engineering Selection Recommendations

Direct Parametric Equivalents (Recommended for Direct Replacement)

VS-10ETF06-M3 and VS-10ETF06THM3 are direct parametric equivalents to the 10ETF06, maintaining identical 600 V and 10 A ratings. Both parts are manufactured by Vishay and carry active product status with ROHS3 compliance. VS-10ETF06THM3 includes AEC-Q101 automotive qualification, making it suitable for automotive applications. These parts provide the most straightforward replacement path with no circuit redesign required.

Higher Current Capacity Alternatives

STTH12R06D and STTH12R06DIRG (STMicroelectronics, 12 A) provide increased current capacity while maintaining 600 V voltage rating. Both are active products with ROHS3 compliance and extended junction temperature range to 175°C. STTH12R06DIRG features insulated packaging. These alternatives are suitable for applications requiring higher current margins or thermal headroom.

Lower Current Alternatives

LXA06T600 (Power Integrations, 6 A), DHG5I600PA (IXYS, 5 A), STTH506DTI (STMicroelectronics, 5 A), QH03TZ600 (Power Integrations, 3 A), and LQA03TC600 (Power Integrations, 3 A) provide reduced current ratings while maintaining 600 V voltage rating. These alternatives are suitable for applications with lower current requirements and offer improved reverse recovery characteristics. All are active products with RoHS or ROHS3 compliance.

High Current Alternative

IDP40E65D2XKSA1 (Infineon Technologies, 40 A, 650 V) provides significantly higher current capacity and voltage rating. This part is suitable for applications requiring substantial current handling or higher voltage margins. Active product status with ROHS3 compliance and extended temperature range to 175°C.

Frequently Asked Questions (FAQ)

Q: Can VS-10ETF06-M3 or VS-10ETF06THM3 be used as direct replacements for the obsolete 10ETF06?

A: Yes. Both parts maintain identical electrical specifications (600 V, 10 A, 1.2 V forward voltage at 10 A) and TO-220-2 packaging. Both are active products with ROHS3 compliance, providing improved product lifecycle support compared to the obsolete 10ETF06.

Q: What is the difference between VS-10ETF06-M3 and VS-10ETF06THM3?

A: VS-10ETF06THM3 includes AEC-Q101 automotive qualification and is designated as automotive-grade. Both parts are otherwise electrically identical. Selection depends on application requirements for automotive certification.

Q: Can STTH12R06D replace the 10ETF06 in existing designs?

A: STTH12R06D is electrically compatible with the 10ETF06 in terms of voltage rating (600 V) and package type (TO-220-2). The 12 A current rating exceeds the 10 A requirement, providing additional capacity margin. No circuit modifications are required for direct substitution. The improved reverse recovery time (45 ns versus 145 ns) may improve circuit performance.

Q: When should lower current alternatives like LXA06T600 or DHG5I600PA be selected?

A: Lower current alternatives are appropriate when the application circuit requires less than 10 A average rectified current. These parts offer improved reverse recovery characteristics and reduced reverse leakage current, which may benefit high-frequency or low-noise applications. Circuit analysis must confirm that the lower current rating is sufficient for the intended application.

Q: Are insulated package variants (STTH12R06DIRG, STTH506DTI) compatible with standard TO-220-2 footprints?

A: Insulated package variants use TO-220-2 Insulated packaging, which maintains the same mechanical footprint as standard TO-220-2 but includes electrical isolation between the mounting tab and the semiconductor junction. These variants are mechanically compatible with standard TO-220-2 PCB layouts. Thermal interface material requirements may differ due to isolation properties.

Q: What is the significance of the reverse recovery time (trr) differences among substitute parts?

A: Reverse recovery time affects switching speed and switching losses in rectifier circuits. The 10ETF06 exhibits 145 ns recovery time. Substitute parts with shorter recovery times (such as STTH12R06D at 45 ns or QH03TZ600 at 9.8 ns) enable faster switching and reduced switching losses, potentially improving circuit efficiency. Longer recovery times do not prevent substitution but may result in increased switching losses.

Q: Can IDP40E65D2XKSA1 be used in place of the 10ETF06?

A: IDP40E65D2XKSA1 is electrically compatible in terms of voltage rating (650 V exceeds 600 V requirement) and package type (TO-220-2). The 40 A current rating significantly exceeds the 10 A requirement. This part is suitable for applications requiring higher current capacity or voltage margin. No circuit modifications are required for direct substitution.

Q: What compliance certifications should be verified for new designs?

A: All recommended substitute parts carry RoHS or ROHS3 compliance. VS-10ETF06THM3 includes AEC-Q101 automotive qualification. REACH compliance is unaffected for all listed parts. Verify specific compliance requirements for your application before final part selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message