TE Connectivity Corcom Filters 10EAS1 Power Entry Connector Receptacle IEC 320-C14 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Corcom Filters 10EAS1 is a Power Entry Connector Receptacle with Male Blades, IEC 320-C14 configuration, designed for panel mount snap-in installation. This component features filtered EMI/RFI protection rated at 10A for commercial applications with quick connect termination (0.250" / 6.3mm). The 10EAS1 is classified as obsolete product status. Identification of equivalent and substitute parts is necessary to maintain design continuity and ensure procurement availability for applications requiring IEC 320-C14 power entry connectors with commercial-grade EMI/RFI filtering.

Substiute Parts

10EAS1

TE Connectivity Corcom FiltersIn Stock: 126810EAS1 Datasheet

Current PartRFQ

1-6609006-6

TE Connectivity Corcom FiltersIn Stock: 7661-6609006-6 Datasheet

MFR RecommendedRFQ

B84771A3010A000

EPCOS - TDK ElectronicsIn Stock: 1041B84771A3010A000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 10EAS1 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: IEC 320-C14
• Connector Type: Receptacle, Male Blades
• Number of Positions: 3
• Filter Type: Filtered (EMI, RFI) - Commercial
• Current Rating - Filter: 10A
• Mounting Type: Panel Mount, Snap-In
• Termination: Quick Connect - 0.250" (6.3mm)
• Panel Thickness Compatibility: 0.031" ~ 0.068" (0.79mm ~ 1.73mm)

Compliance Parameters:

• RoHS3 Compliance required
• REACH Affected status

Two substitute parts meet these criteria: TE Connectivity Corcom Filters 1-6609006-6 (MFR Recommended) and EPCOS - TDK Electronics B84771A3010A000 (Similar). Both maintain identical connector specifications, filtering characteristics, and mounting requirements while offering active product status and enhanced compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity Corcom Filters 1-6609006-6 (MFR Recommended Substitute)

The 1-6609006-6 is the manufacturer-recommended substitute for the obsolete 10EAS1. This part maintains identical electrical and mechanical specifications across all critical parameters. The 1-6609006-6 carries active product status with enhanced compliance certifications including CSA, UL, and VDE approvals. The part provides specified voltage rating (120/250VAC) and current rating (10A) at the appliance inlet, offering complete electrical characterization. Panel cutout dimensions are defined as Rectangular - 30.48mm x 22.86mm. This substitute is the primary selection for direct replacement applications requiring continuity with the original 10EAS1 design.

EPCOS - TDK Electronics B84771A3010A000 (Similar Substitute)

The B84771A3010A000 provides functional equivalence across all mandatory connector, filtering, and mounting parameters. This part carries active product status with comprehensive approval certifications (cUL, ENEC, UL) and includes IP40 ingress protection rating. The B84771A3010A000 features a bleed resistor with front or rear side mount capability, providing additional design flexibility. Voltage rating is specified as 250VAC/DC. This substitute is suitable for applications where the additional ingress protection and bleed resistor functionality align with system requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1-6609006-6 be used as a direct replacement for the 10EAS1?

A: Yes. The 1-6609006-6 maintains identical specifications across connector style (IEC 320-C14), connector type (Receptacle, Male Blades), number of positions (3), filter type (Filtered EMI/RFI - Commercial), current rating (10A), mounting type (Panel Mount, Snap-In), and termination (Quick Connect - 0.250"). Panel thickness compatibility is confirmed at 0.031" ~ 0.068" (0.79mm ~ 1.73mm). This is the manufacturer-recommended substitute.

Q: What is the difference between the 1-6609006-6 and B84771A3010A000?

A: Both parts meet the mandatory substitution criteria for IEC 320-C14 power entry connectors with 10A filtered EMI/RFI protection. The 1-6609006-6 is from TE Connectivity (same manufacturer as the original 10EAS1) with CSA, UL, and VDE certifications and specified voltage rating of 120/250VAC. The B84771A3010A000 is from EPCOS - TDK Electronics with cUL, ENEC, and UL certifications, includes IP40 ingress protection, and features a bleed resistor with front or rear side mount capability. Voltage rating for the B84771A3010A000 is 250VAC/DC.

Q: Are both substitute parts RoHS3 compliant?

A: Yes. Both the 1-6609006-6 and B84771A3010A000 are ROHS3 Compliant and REACH Affected, matching the compliance status of the original 10EAS1.

Q: What are the panel cutout dimensions for each part?

A: The 1-6609006-6 specifies panel cutout dimensions as Rectangular - 30.48mm x 22.86mm. The B84771A3010A000 lists panel cutout dimensions as Variable Size. Both parts accommodate panel thickness of 0.031" ~ 0.068" (0.79mm ~ 1.73mm) for the 1-6609006-6; panel thickness is not specified for the B84771A3010A000.

Q: Do these substitute parts accommodate a fuse?

A: No. The 10EAS1, 1-6609006-6, and B84771A3010A000 all do not accommodate a fuse.

Q: What termination type is used on the substitute parts?

A: Both substitute parts use Quick Connect - 0.250" (6.3mm) termination, identical to the original 10EAS1.

Q: Which substitute part should be selected for new designs?

A: For direct replacement of the obsolete 10EAS1, the 1-6609006-6 is the manufacturer-recommended choice. For applications requiring enhanced ingress protection (IP40) and bleed resistor functionality, the B84771A3010A000 is suitable. Selection depends on specific system requirements and approval agency preferences.