Intel 10AS032E3F29E2LG Equivalent & Substitute Parts

Part Overview

The Intel 10AS032E3F29E2LG is a System On Chip (SOC) integrating a Dual ARM® Cortex®-A9 MPCore™ processor with CoreSight™ debugging capabilities and Arria 10 SX FPGA fabric containing 320K Logic Elements. This embedded processor operates at 1.5GHz and is housed in a 780-FBGA package. The component is currently in active production status with full RoHS compliance and REACH unaffected designation. Substitute parts are identified when electrical specifications, package compatibility, and operational parameters remain identical across manufacturing variants or packaging options.

Substiute Parts

10AS032E3F29E2LG

IntelIn Stock: 226510AS032E3F29E2LG Datasheet

Current PartRFQ

10AS032E3F29E2SG

IntelIn Stock: 79110AS032E3F29E2SG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 10AS032E3F29E2LG is determined by strict equivalence across the following parameters: processor architecture (Dual ARM® Cortex®-A9 MPCore™ with CoreSight™), clock speed (1.5GHz), FPGA logic element count (320K), RAM capacity (256KB), package type (780-FBGA, FC 29x29), I/O pin count (360), operating temperature range (0°C ~ 100°C TJ), and compliance certifications (RoHS Compliant, REACH Unaffected). The substitute part 10AS032E3F29E2SG meets all these criteria, differing only in the final suffix designation which indicates a packaging variant within the same Arria 10 SX series.

Parameter Comparison

Engineering Selection Recommendations

Both the 10AS032E3F29E2LG and 10AS032E3F29E2SG are active production components with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. Both components maintain RoHS compliance and REACH unaffected status, ensuring regulatory alignment for industrial and embedded applications. The 780-FBGA package format and 360 I/O pin configuration remain constant across both variants, supporting direct substitution in existing PCB designs without layout modification.

Frequently Asked Questions (FAQ)

Q: Can the 10AS032E3F29E2SG replace the 10AS032E3F29E2LG in production designs?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical processor architecture, clock speed, FPGA logic element count, RAM capacity, package type, I/O configuration, and operating temperature range. The suffix designation indicates a packaging or supply chain variant only.

Q: Are there any differences in pin configuration between these parts?

A: No. Both parts use the 780-FBGA package with FC (29x29) footprint and 360 I/O pins. PCB designs require no modification for substitution.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both the 10AS032E3F29E2LG and 10AS032E3F29E2SG are RoHS Compliant and REACH Unaffected, with identical Moisture Sensitivity Level 3 (168 Hours) ratings.

Q: What determines substitution eligibility for Arria 10 SX components?

A: Substitution is valid when the following parameters match: processor type and core count, clock frequency, FPGA logic element density, embedded RAM size, package type and pin count, operating temperature range, and compliance certifications. Any deviation in these parameters disqualifies substitution.

Q: Is inventory availability a factor in part selection?

A: Inventory status is a supply chain consideration but does not affect technical substitution eligibility. Both parts are currently in active production with available stock.