10A02GP-TP Equivalent & Substitute Parts Reference

Part Overview

The Micro Commercial Co 10A02GP-TP is a standard rectifier diode rated at 100 V reverse voltage and 10A average rectified current, provided in an R-6 through-hole axial package. This component is categorized under diodes and rectifiers and is defined by standard recovery speed. It is currently listed as "Not For New Designs," indicating the need for identifying alternative models for new or ongoing engineering activities where lifecycle, availability, or compliance may be a concern.

Substiute Parts

10A02GP-TP

Micro Commercial CoIn Stock: 76210A02GP-TP Datasheet

Current PartRFQ

HER602G A0G

Taiwan Semiconductor CorporationIn Stock: 792HER602G A0G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute or equivalent diodes are grouped based on the following explicitly provided key parameters:

• Category (Diodes, Rectifiers)
• Voltage - DC Reverse (Vr) (Max)
• Current - Average Rectified (Io)
• Voltage - Forward (Vf) (Max) @ If
• Speed
• Current - Reverse Leakage @ Vr
• Capacitance @ Vr, F
• Mounting Type
• Package / Case
• Supplier Device Package
• Operating Temperature - Junction
• Compliance/Certification (ECCN, REACH Status) Only parts matching these fields, as provided, are included for consideration.

Parameter Comparison

Engineering Selection Recommendations

Component selection is determined by product status and environmental compliance. The 10A02GP-TP is marked as "Not For New Designs." The listed substitute, HER602G A0G, is "Active," ROHS3 Compliant, and REACH Unaffected. Both components share the same compliance status (REACH Unaffected, ECCN EAR99, HTSUS 8541.10.0080), allowing direct comparison based on product lifecycle and regulatory needs.

Frequently Asked Questions (FAQ)

Q1: What parameters must match for a valid diode rectifier substitution?
A1: The essential parameters are: category, maximum voltage - DC reverse (Vr), average rectified current (Io), voltage - forward (Vf) at rated current, speed, reverse leakage current, capacitance, mounting type, package/case, supplier device package, operating temperature range, and compliance/certification data.

Q2: Is package compatibility ensured between 10A02GP-TP and HER602G A0G?
A2: Both parts use an R-6, Axial package and are through-hole mounted, providing mechanical compatibility.

Q3: How does product status affect selection?
A3: 10A02GP-TP is labeled "Not For New Designs," indicating it is not recommended for new development. HER602G A0G is "Active."

Q4: Are there compliance or certification differences?
A4: Both diodes are classified as REACH Unaffected and have the same ECCN and HTSUS codes.

Q5: Should mounting and thermal considerations be reviewed with each substitution?
A5: Yes, mounting type, package/case, and maximum operating temperature must be matched as per the parameters provided, all of which are the same for both parts.