108477048001049 DIN Connector Header - Equivalent & Substitute Parts

Part Overview

The KYOCERA AVX 108477048001049 is a 48-position DIN connector header with male pins, designed for through-hole PCB mounting with gold-plated contacts. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and procurement planning. The connector operates across an industrial temperature range of -65°C to 125°C with a 3A current rating per contact.

Substiute Parts

108477048001049

KYOCERA AVXIn Stock: 914108477048001049 Datasheet

Current PartRFQ

86093487614765ELF

Amphenol ICC (FCI)In Stock: 108686093487614765ELF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 108477048001049 is determined by strict equivalence across the following critical parameters:

• Position Count & Pitch: 48 positions at 0.100" (2.54mm) spacing
• Physical Configuration: 3-row arrangement with R/2 (1/2 R) style
• Connector Orientation: Header with male pins
• Mounting Method: Through-hole PCB termination
• Contact Material: Gold plating for corrosion resistance and signal integrity
• Electrical Performance: Current rating and operating temperature range
• Compliance Standards: UL94 V-0 flammability classification

The Amphenol ICC (FCI) part 86093487614765ELF meets the dimensional, positional, and material specifications required for direct functional substitution. Both components share identical pitch, row configuration, and connector style, enabling mechanical and electrical compatibility in equivalent applications.

Parameter Comparison

Engineering Selection Recommendations

The Amphenol ICC (FCI) 86093487614765ELF qualifies as a functional equivalent for the obsolete KYOCERA AVX 108477048001049 based on matching mechanical dimensions, electrical interface specifications, and compliance certifications. Both components maintain UL94 V-0 flammability ratings and unlimited moisture sensitivity classification, ensuring equivalent performance in controlled environments.

The substitute part carries active product status with RoHS compliance, supporting long-term procurement availability and regulatory alignment. The primary electrical difference—1.5A versus 3A current rating—requires circuit-level evaluation to confirm compatibility with existing load requirements. The operating temperature minimum of -55°C on the substitute part (versus -65°C on the original) must be verified against system specifications for applications requiring extended low-temperature operation.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 86093487614765ELF directly replace the KYOCERA AVX 108477048001049 in existing designs?

A: Direct mechanical and electrical substitution is supported for applications where the 1.5A per-contact current rating meets system requirements. The identical pitch, row count, and connector style ensure PCB footprint compatibility. Circuit validation is required to confirm current capacity sufficiency.

Q: What is the significance of the current rating difference between these parts?

A: The original part supports 3A per contact, while the substitute supports 1.5A per contact. Applications operating at or below 1.5A per contact experience no functional impact. Higher-current applications require alternative solutions or circuit redesign.

Q: Are there temperature range considerations for substitution?

A: The substitute part operates from -55°C to 125°C, compared to the original -65°C to 125°C range. Systems requiring operation below -55°C cannot use this substitute without additional thermal analysis or alternative component selection.

Q: What packaging differences exist between these parts?

A: The KYOCERA AVX part is supplied without specified packaging, while the Amphenol ICC substitute is packaged in trays. Inventory management and handling procedures may require adjustment to accommodate tray-based delivery.

Q: How do compliance certifications compare?

A: Both parts maintain UL94 V-0 flammability classification and MSL 1 (unlimited) moisture sensitivity. The substitute carries RoHS compliance status, supporting regulatory requirements in markets with RoHS mandates. The original part is REACH unaffected, while the substitute is REACH affected.