Master Appliance Co 10814 Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The Master Appliance Co 10814 is a ring terminal connector designed for 18-20 AWG wire applications with a 1/4" stud connection. This component features insulated construction with heat shrink material and is classified as part of the Solderseal™ series. The part is currently listed as obsolete, making identification of compatible substitute components essential for ongoing maintenance and repair applications. Substitute parts must maintain identical electrical and mechanical specifications to ensure proper circuit function and connection reliability.

Substiute Parts

10814

Master Appliance CoIn Stock: 103810814 Datasheet

Current PartRFQ

11828

Master Appliance CoIn Stock: 93111828 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute identification for the Master Appliance Co 10814 is based on strict equivalence of the following critical parameters:

• Wire Gauge: 18-20 AWG (determines conductor compatibility)
• Stud/Tab Size: 1/4 Stud (determines mechanical fit and connection interface)
• Terminal Type: Circular (determines contact geometry)
• Termination Method: Crimp (determines assembly process compatibility)
• Insulation Material: Polyolefin with heat shrink (determines electrical safety and environmental protection)
• Color: Red (determines circuit identification and polarity marking)
• Mounting Type: Free Hanging (In-Line) (determines installation configuration)

The substitute part Master Appliance Co 11828 satisfies all critical parameter requirements for direct substitution. Both components are manufactured by Master Appliance Co within the Solderseal™ series and share identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Master Appliance Co 11828 is the direct substitute for obsolete part 10814. Selection is based on the following engineering criteria:

Electrical and Mechanical Equivalence: Both components share identical specifications for wire gauge (18-20 AWG), stud size (1/4"), terminal geometry (circular), and termination method (crimp). These parameters ensure functional interchangeability in circuit applications.

Product Status: Part 10814 is obsolete, while 11828 is in active production. Transition to 11828 ensures access to current inventory and ongoing supply chain availability.

Regulatory Compliance: Part 11828 carries ROHS3 compliance certification, meeting current environmental and material restriction standards. Both parts maintain REACH Unaffected status and share identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Series Continuity: Both components belong to the Solderseal™ series, maintaining design consistency and performance characteristics within the product line.

Frequently Asked Questions (FAQ)

Q: Can Master Appliance Co 11828 be used as a direct replacement for 10814?

A: Yes. Both components are electrically and mechanically equivalent. They share identical wire gauge (18-20 AWG), stud size (1/4"), terminal type (circular), termination method (crimp), insulation material (polyolefin with heat shrink), and color (red). The 11828 is the active production equivalent of the obsolete 10814.

Q: What is the difference between parts 10814 and 11828?

A: The primary difference is product status and packaging. Part 10814 is obsolete, while 11828 is in active production. Part 11828 also carries ROHS3 compliance certification. Both components are functionally identical for circuit applications.

Q: Are there any compatibility concerns when substituting 11828 for 10814?

A: No compatibility concerns exist. All critical parameters match: wire gauge, stud size, terminal geometry, termination method, insulation type, and mounting configuration are identical between the two parts.

Q: What packaging is available for part 11828?

A: Part 11828 is supplied in bulk packaging (50-piece packs), whereas part 10814 packaging information is not specified in available documentation.

Q: Do both parts meet current regulatory requirements?

A: Part 11828 meets ROHS3 compliance standards. Both parts maintain REACH Unaffected status and share identical trade classification codes (ECCN: EAR99; HTSUS: 8536.90.4000).

Q: What wire gauges are supported by these ring terminals?

A: Both the 10814 and 11828 support 18-20 AWG wire gauge applications, accommodating standard electrical wiring in automotive, industrial, and general electrical assembly applications.

Q: Is the 1/4" stud size a critical specification for substitution?

A: Yes. The 1/4" stud size is a critical mechanical parameter that determines the connection interface. Substitutes must maintain this specification to ensure proper fit and electrical contact with mating components.