Master Appliance Co 10813 Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The Master Appliance Co 10813 is a ring terminal connector designed for 18-20 AWG wire applications with a #10 stud configuration. This component features circular terminal geometry with crimp termination and polyolefin heat shrink insulation in red color. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and system maintenance. Substitute parts must maintain identical electrical and mechanical compatibility across wire gauge, stud size, terminal type, and insulation specifications.

Substiute Parts

10813

Master Appliance CoIn Stock: 105210813 Datasheet

Current PartRFQ

11827

Master Appliance CoIn Stock: 105011827 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Master Appliance Co 10813 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Terminal Type: Circular
• Stud/Tab Size: #10 Stud
• Wire Gauge: 18-20 AWG
• Termination Method: Crimp
• Insulation Type: Heat Shrink
• Insulation Material: Polyolefin
• Color: Red
• Mounting Type: Free Hanging (In-Line)
• Manufacturer: Master Appliance Co
• Series: Solderseal™

The substitute part Master Appliance Co 11827 satisfies all mandatory matching parameters, establishing direct functional and mechanical equivalence. The primary distinction between the main part and substitute is product status (obsolete versus active) and packaging configuration (individual versus bulk 50-pack).

Parameter Comparison

Engineering Selection Recommendations

Master Appliance Co 11827 is the direct active equivalent for the obsolete Master Appliance Co 10813. Selection of part 11827 is based on:

Product Status Alignment: Part 11827 maintains active product status, ensuring continued availability and manufacturer support. The obsolete status of part 10813 creates supply chain risk and eliminates access to technical documentation updates.

Regulatory Compliance: Part 11827 carries ROHS3 compliance certification, exceeding the regulatory posture of the original part. Both parts maintain REACH Unaffected status and EAR99 export classification.

Electrical and Mechanical Equivalence: All critical parameters determining terminal function and circuit compatibility are identical between the two parts. Wire gauge accommodation (18-20 AWG), stud interface (#10), crimp termination method, and insulation specifications are fully matched.

Packaging Consideration: Part 11827 is supplied in bulk 50-pack configuration. Applications requiring individual unit procurement must account for this packaging difference in inventory management and procurement planning.

Frequently Asked Questions (FAQ)

Q: Can Master Appliance Co 11827 be used as a direct replacement for part 10813 in existing assemblies?

A: Yes. Both parts are functionally and mechanically equivalent across all critical parameters: terminal type, stud size, wire gauge, termination method, insulation type, and color. Direct substitution is supported without circuit redesign or assembly modification.

Q: What is the primary reason for substituting part 10813 with part 11827?

A: Part 10813 is classified as obsolete, creating supply chain discontinuity. Part 11827 is an active product from the same manufacturer and series, ensuring ongoing availability and technical support.

Q: Does the packaging difference (individual versus 50-pack) affect electrical performance?

A: No. Packaging configuration does not affect terminal electrical or mechanical performance. The difference is purely logistical and relates to procurement quantity and inventory management.

Q: Are there compliance differences between the two parts?

A: Part 11827 carries ROHS3 compliance certification, while part 10813 lists RoHS status as not applicable. Both parts maintain REACH Unaffected status. Applications subject to ROHS3 requirements should specify part 11827.

Q: What wire gauges are compatible with these ring terminals?

A: Both parts accommodate 18-20 AWG wire. Crimp termination must be performed using tooling rated for this wire gauge range to ensure proper contact pressure and electrical continuity.

Q: Is the #10 stud size compatible with standard electrical connectors?

A: The #10 stud configuration is a standard interface size in electrical terminal applications. Compatibility depends on the mating connector or component specification. Verify stud hole diameter and thread specifications in the receiving assembly.

Q: Can these terminals be used in high-temperature applications?

A: The polyolefin heat shrink insulation material determines thermal operating limits. Consult Master Appliance Co technical documentation for specific temperature ratings and application suitability.