Equivalent & Substitute Parts for 107TLS025M

Part Overview

The 107TLS025M is a 100 µF, 25 V aluminum electrolytic capacitor in axial configuration, manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for general-purpose applications requiring through-hole mounting. The part is RoHS3 compliant and REACH unaffected, suitable for deployment in standard electronic assemblies operating within specified temperature and voltage parameters.

Substitute parts are identified when equivalent capacitance and tolerance values are maintained while allowing for enhanced electrical performance characteristics or extended operational temperature ranges within the same physical form factor.

Substiute Parts

107TLS025M

Cornell Dubilier / Illinois CapacitorIn Stock: 784107TLS025M Datasheet

Current PartRFQ

107TMA050M

Cornell Dubilier / Illinois CapacitorIn Stock: 5245107TMA050M Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 107TLS025M is permissible with the 107TMA050M based on the following criteria:

Maintained Parameters (Substitution Basis):

• Capacitance: 100 µF (identical)
• Tolerance: ±20% (identical)
• Physical form factor: Axial, Can configuration (identical)
• Size / Dimension: 0.315" Dia x 0.630" L / 8.00mm x 16.00mm (identical)
• Mounting type: Through Hole (identical)
• Polarization: Polar (identical)
• Manufacturer: Cornell Dubilier / Illinois Capacitor (same manufacturer family)
• RoHS Status: ROHS3 Compliant (identical)
• REACH Status: REACH Unaffected (identical)

Enhanced Parameters in Substitute:

• Voltage rating increased from 25 V to 50 V
• Operating temperature range extended from -40°C ~ 85°C to -40°C ~ 105°C
• Lifetime extended from 2000 Hrs @ 85°C to 2000 Hrs @ 105°C
• ESR reduced from 2.321 Ohm to 1.989 Ohm @ 120 Hz

The 107TMA050M operates at higher voltage and temperature ratings while maintaining identical capacitance, tolerance, and physical dimensions, making it suitable for applications where the original 107TLS025M is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the 107TLS025M and 107TMA050M are Active product status components manufactured by Cornell Dubilier / Illinois Capacitor. Both parts maintain full RoHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in current manufacturing environments.

The 107TMA050M substitute part is electrically compatible with applications designed for the 107TLS025M due to identical capacitance (100 µF), tolerance (±20%), and physical dimensions (8.00mm x 16.00mm axial can). The substitute operates at doubled voltage rating (50 V versus 25 V) and extended temperature range (-40°C ~ 105°C versus -40°C ~ 85°C), providing design margin for applications subject to thermal or voltage stress variations.

Selection between these parts depends on circuit voltage requirements and thermal operating conditions. The 107TLS025M is appropriate for applications with 25 V maximum circuit voltage and 85°C maximum ambient temperature. The 107TMA050M is appropriate for applications requiring higher voltage headroom or extended thermal operation to 105°C.

Frequently Asked Questions (FAQ)

Q: Can the 107TMA050M directly replace the 107TLS025M in an existing circuit design?

A: Yes. Both parts share identical capacitance (100 µF), tolerance (±20%), and physical form factor (8.00mm x 16.00mm axial can). The 107TMA050M operates at higher voltage and temperature ratings, making it electrically compatible with circuits designed for the 107TLS025M.

Q: What is the primary difference between these two parts?

A: The 107TMA050M has a 50 V voltage rating compared to the 107TLS025M's 25 V rating. Additionally, the 107TMA050M supports extended operating temperature to 105°C versus 85°C for the 107TLS025M, and features lower ESR (1.989 Ohm versus 2.321 Ohm @ 120 Hz).

Q: Are both parts RoHS3 compliant?

A: Yes. Both the 107TLS025M and 107TMA050M are RoHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and deployment.

Q: Do these parts have identical physical dimensions?

A: Yes. Both parts are packaged in identical axial can configuration with dimensions of 0.315" diameter by 0.630" length (8.00mm x 16.00mm), ensuring mechanical compatibility in through-hole PCB layouts.

Q: What is the difference in ripple current ratings?

A: The 107TLS025M supports 190 mA ripple current @ 120 Hz. The 107TMA050M supports 155 mA @ 120 Hz and 232.5 mA @ 50 kHz. Ripple current differences reflect the distinct thermal and electrical characteristics of each series.

Q: Which part should be selected for a high-temperature application?

A: The 107TMA050M is suitable for applications requiring operation to 105°C. The 107TLS025M is rated to 85°C maximum. Selection depends on the specific thermal requirements of the application circuit.