Equivalent & Substitute Parts for 107SVL025MFE

Part Overview

The 107SVL025MFE is a 100 µF, 25 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for general purpose applications. The part operates across a temperature range of -55°C to 105°C with a rated lifetime of 5000 hours at 105°C. Substitute parts are identified to address inventory availability, performance optimization, or application-specific requirements while maintaining core electrical and mechanical compatibility.

Substiute Parts

107SVL025MFE

Cornell Dubilier / Illinois CapacitorIn Stock: 1243107SVL025MFE Datasheet

Current PartRFQ

ATB107M035

Cornell Dubilier / Illinois CapacitorIn Stock: 32574ATB107M035 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 107SVL025MFE is determined by the following critical parameters:

Electrical Compatibility Criteria:

• Capacitance value must equal 100 µF
• Tolerance must be ±20%
• Voltage rating must be equal to or greater than 25 V
• Operating temperature range must encompass -55°C to 105°C
• Lifetime specification must meet or exceed 5000 hours at 105°C
• Polarization must remain Polar

Mechanical Compatibility Criteria:

• Package type must be Radial, Can - SMD
• Mounting type must be Surface Mount
• Physical dimensions (diameter and height) must be compatible with PCB layout constraints
• Surface mount land size must accommodate the component footprint

Compliance Criteria:

• RoHS3 compliance required
• MSL rating of 1 (Unlimited) required
• REACH Unaffected status required

The substitute part ATB107M035 meets all electrical and mechanical compatibility requirements while providing enhanced performance characteristics in specific parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (107SVL025MFE): Use the 107SVL025MFE when the application circuit is designed specifically for 25 V rated voltage and the ripple current requirements do not exceed 140 mA at 120 Hz or 210 mA at 100 kHz. This part is suitable for general purpose applications with standard performance requirements.

Substitute Selection (ATB107M035): The ATB107M035 is a direct substitute that provides enhanced electrical performance characteristics. The 35 V voltage rating provides additional safety margin above the 25 V requirement. The lower ESR value (1.86 Ohm versus 2.65 Ohm) results in reduced heat generation and improved transient response. The significantly higher ripple current ratings (420 mA at 120 Hz and 600 mA at 100 kHz) accommodate applications with greater current demands. Both parts maintain identical compliance certifications (ROHS3, REACH Unaffected) and identical MSL ratings. Physical dimensions are compatible with negligible height variation (0.413" versus 0.417").

Both parts are Active status products from the same manufacturer, ensuring consistent quality and supply chain reliability.

Frequently Asked Questions (FAQ)

Q: Can ATB107M035 be used as a direct replacement for 107SVL025MFE?

A: Yes. The ATB107M035 is electrically and mechanically compatible. Both parts have identical capacitance (100 µF), tolerance (±20%), operating temperature range (-55°C to 105°C), and lifetime rating (5000 hours at 105°C). Physical dimensions are compatible with negligible variation. Both are ROHS3 compliant with MSL rating 1 (Unlimited).

Q: What are the key differences between these two parts?

A: The primary differences are voltage rating (25 V versus 35 V), ESR (2.65 Ohm versus 1.86 Ohm), and ripple current capacity. The ATB107M035 provides higher voltage margin, lower ESR, and three times greater ripple current handling at both 120 Hz and 100 kHz frequencies.

Q: Will the ATB107M035 fit the same PCB footprint as 107SVL025MFE?

A: Yes. Both parts use identical surface mount land size specifications and are housed in the same Radial, Can - SMD package type with matching diameter (0.315" / 8.00mm). Height difference is negligible (0.413" versus 0.417").

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH Unaffected, and carry identical MSL rating of 1 (Unlimited). Both are Active status products from Cornell Dubilier / Illinois Capacitor.

Q: When should I use 107SVL025MFE instead of ATB107M035?

A: Use 107SVL025MFE when the application is specifically designed for 25 V operation and ripple current requirements do not exceed the specified limits (140 mA at 120 Hz, 210 mA at 100 kHz). The ATB107M035 is suitable for all applications where 107SVL025MFE is specified, but may not be necessary if performance headroom is not required.

Q: What is the inventory status of these parts?

A: 107SVL025MFE has 1137 pieces in stock. ATB107M035 has 32526 pieces in stock, providing significantly greater availability.