Equivalent & Substitute Parts for 107SVL016MEL

Part Overview

The 107SVL016MEL is a 100 µF, 16 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for general purpose applications. The SVL series capacitor features a 3000-hour lifetime rating at 105°C and operates across a temperature range of -55°C to 105°C. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, inventory availability, or when upgraded voltage ratings provide enhanced circuit margin.

Substiute Parts

107SVL016MEL

Cornell Dubilier / Illinois CapacitorIn Stock: 726107SVL016MEL Datasheet

Current PartRFQ

ATB107M016

Cornell Dubilier / Illinois CapacitorIn Stock: 32921ATB107M016 Datasheet

DirectRFQ

ATB107M025

Cornell Dubilier / Illinois CapacitorIn Stock: 20433ATB107M025 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 107SVL016MEL are identified based on the following criteria:

Direct Substitution Criteria:

• Capacitance value: 100 µF (exact match required)
• Voltage rating: 16 V minimum (equal or higher acceptable)
• Tolerance: ±20% (matching specification)
• Package type: Radial, Can - SMD (mechanical compatibility)
• Polarization: Polar (functional requirement)
• Operating temperature range: -55°C to 105°C (minimum coverage required)
• RoHS3 compliance and MSL Level 1 (regulatory and handling requirements)

Substitution Categories:

1. Direct Equivalent (ATB107M016): Identical electrical specifications (100 µF, 16 V, ±20%) with improved ESR performance (2.52 Ohm vs. 3.32 Ohm) and higher ripple current capability. Same series voltage rating ensures drop-in compatibility.

2. Upgraded Voltage Rating (ATB107M025): Same capacitance and tolerance with elevated voltage rating (25 V vs. 16 V). Provides additional circuit margin and improved ESR (2.12 Ohm). Physical dimensions remain compatible with PCB layout.

All substitute parts maintain identical capacitance, tolerance, temperature range, RoHS3 compliance, and MSL Level 1 rating as the primary part.

Parameter Comparison

Engineering Selection Recommendations

ATB107M016 Selection Criteria:

The ATB107M016 serves as a direct electrical equivalent to the 107SVL016MEL with identical capacitance (100 µF), voltage rating (16 V), and tolerance (±20%). This substitute is appropriate when:

• Direct replacement with improved performance characteristics is required
• ESR reduction from 3.32 Ohm to 2.52 Ohm benefits circuit performance
• Higher ripple current capability (196 mA @ 120 Hz vs. 90 mA) accommodates increased current demands
• PCB layout accommodates the slightly larger land size (0.287" L x 0.268" W vs. 0.260" L x 0.260" W)
• All regulatory requirements (ROHS3, MSL Level 1) are maintained

ATB107M025 Selection Criteria:

The ATB107M025 provides an upgraded voltage rating (25 V vs. 16 V) while maintaining identical capacitance and tolerance. This substitute is appropriate when:

• Circuit design benefits from increased voltage margin above the 16 V nominal requirement
• Lower ESR (2.12 Ohm) and higher ripple current capability (210 mA @ 120 Hz) improve performance
• PCB layout accommodates the modified land size (0.260" L x 0.280" W)
• All regulatory requirements (ROHS3, MSL Level 1) are maintained
• Height increase from 0.307" to 0.315" does not conflict with mechanical constraints

All substitute parts maintain Active product status and full compliance with ROHS3 and REACH requirements.

Frequently Asked Questions (FAQ)

Q: Can ATB107M016 be used as a direct replacement for 107SVL016MEL?

A: Yes. The ATB107M016 maintains identical capacitance (100 µF), voltage rating (16 V), tolerance (±20%), operating temperature range (-55°C to 105°C), and package type (Radial, Can - SMD). The substitute offers improved ESR (2.52 Ohm vs. 3.32 Ohm) and higher ripple current ratings. PCB land size differs slightly (0.287" L x 0.268" W vs. 0.260" L x 0.260" W); verify layout compatibility before implementation.

Q: What is the advantage of using ATB107M025 over the original 107SVL016MEL?

A: The ATB107M025 provides a higher voltage rating (25 V vs. 16 V) while maintaining the same 100 µF capacitance. This elevated rating creates additional circuit margin and reduces stress on the component. The ATB107M025 also features lower ESR (2.12 Ohm vs. 3.32 Ohm) and superior ripple current capability (210 mA @ 120 Hz vs. 90 mA). Height increases from 0.307" to 0.315"; confirm PCB clearance before selection.

Q: Are there any mechanical compatibility concerns when substituting these parts?

A: All three parts share identical diameter (0.248" / 6.30mm) and similar heights (0.307" to 0.315"). Surface mount land sizes vary slightly:

• 107SVL016MEL: 0.260" L x 0.260" W
• ATB107M016: 0.287" L x 0.268" W
• ATB107M025: 0.260" L x 0.280" W

Verify PCB pad layout compatibility with the selected substitute before assembly.

Q: Do all substitute parts meet the same regulatory requirements?

A: Yes. The 107SVL016MEL, ATB107M016, and ATB107M025 are all ROHS3 compliant, REACH unaffected, and classified as MSL Level 1 (Unlimited moisture sensitivity). All parts carry ECCN EAR99 and HTSUS 8532.22.0020 classifications.

Q: What is the difference in ESR between these parts, and why does it matter?

A: ESR (Equivalent Series Resistance) at 120 Hz:

• 107SVL016MEL: 3.32 Ohm
• ATB107M016: 2.52 Ohm
• ATB107M025: 2.12 Ohm

Lower ESR reduces heat generation, improves voltage regulation, and enhances ripple current handling. The ATB series substitutes provide 24% to 36% ESR reduction compared to the original SVL part.

Q: Can these parts be used interchangeably in bypass and decoupling applications?

A: Yes. All three parts are suitable for bypass and decoupling applications. The ATB107M016 and ATB107M025 are specifically rated for these applications and offer superior ripple current performance (196-210 mA @ 120 Hz vs. 90 mA), making them particularly effective in high-frequency decoupling circuits.

Q: What is the lifetime rating for all substitute parts?

A: All three parts—107SVL016MEL, ATB107M016, and ATB107M025—are rated for 3000 hours at 105°C operating temperature. This specification ensures consistent reliability across all substitution options.