Equivalent & Substitute Parts for 107HSM063M

Part Overview

The 107HSM063M is a 100 µF, 63 V aluminum electrolytic capacitor in radial, can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The part operates across a temperature range of -40°C to 125°C with a rated lifetime of 2000 hours at 125°C, suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance.

Key Parameters

Parameter	Value	Unit
Capacitance	100	µF
Tolerance	±20%	—
Voltage - Rated	63	V
ESR @ 120Hz	1.658	Ohm
Lifetime @ Temperature	2000 Hrs @ 125°C	—
Operating Temperature Range	-40°C ~ 125°C	—
Ripple Current @ 120 Hz	200	mA
Ripple Current @ 10 kHz	250	mA
Lead Spacing	0.197" (5.00mm)	—
Diameter	0.394" (10.00mm)	—
Height - Seated (Max)	0.689" (17.50mm)	—
Mounting Type	Through Hole	—
Package / Case	Radial, Can	—
Polarization	Polar	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitution of the 107HSM063M is determined by strict electrical and mechanical compatibility criteria. All substitute parts must maintain the following core parameters:

Mandatory Matching Parameters:

Capacitance: 100 µF
Tolerance: ±20%
Voltage Rating: 63 V
Polarization: Polar
Mounting Type: Through Hole
Package Type: Radial, Can
Lead Spacing: 0.197" (5.00mm)
Diameter: 0.394" (10.00mm)

Allowable Variations:

Height: Substitute parts may exceed the original 0.689" (17.50mm) maximum seated height, provided they do not exceed 0.866" (22.00mm) in board-level applications
Operating Temperature Range: Substitute parts may extend the upper or lower temperature limits beyond the original -40°C to 125°C range
Lifetime @ Temperature: Substitute parts may offer equal or extended lifetime ratings
Ripple Current Ratings: Substitute parts may provide equal or higher ripple current capacity
ESR / Impedance: Substitute parts may provide equal or lower ESR values

Substitute parts are classified into two categories: Upgrade parts (active status with enhanced specifications) and Similar parts (alternative active components with comparable performance).

Parameter Comparison

Parameter	107HSM063M (Original)	63RX30100M10X16 (Rubycon)	MAL214658101E3 (Vishay)	MAL214668101E3 (Vishay)	UBT1J101MPD8 (Nichicon)	UBW1J101MPD (Nichicon)	MAL214058101E3 (Vishay)
Capacitance	100 µF	100 µF	100 µF	100 µF	100 µF	100 µF	100 µF
Tolerance	±20%	±20%	±20%	±20%	±20%	±20%	±20%
Voltage - Rated	63 V	63 V	63 V	63 V	63 V	63 V	63 V
Lifetime @ Temp.	2000 Hrs @ 125°C	2000 Hrs @ 130°C	2500 Hrs @ 125°C	2500 Hrs @ 125°C	3000 Hrs @ 125°C	2000 Hrs @ 135°C	3000 Hrs @ 125°C
Operating Temperature	-40°C ~ 125°C	-40°C ~ 130°C	-55°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 125°C	-55°C ~ 135°C	-55°C ~ 125°C
Lead Spacing	0.197" (5.00mm)	0.197" (5.00mm)	0.197" (5.00mm)	0.197" (5.00mm)	0.197" (5.00mm)	0.197" (5.00mm)	0.197" (5.00mm)
Diameter	0.394" (10.00mm)	0.394" (10.00mm)	0.394" (10.00mm)	0.394" (10.00mm)	0.394" (10.00mm)	0.394" (10.00mm)	0.394" (10.00mm)
Height - Seated (Max)	0.689" (17.50mm)	0.709" (18.00mm)	0.689" (17.50mm)	0.689" (17.50mm)	0.709" (18.00mm)	0.709" (18.00mm)	0.866" (22.00mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can
Polarization	Polar	Polar	Polar	Polar	Polar	Polar	Polar
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
RoHS Status	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Ratings	—	AEC-Q200	AEC-Q200	AEC-Q200	—	—	—

Engineering Selection Recommendations

Upgrade Substitutes (Active Status, Enhanced Specifications):

The following parts are classified as upgrades and are recommended for direct substitution in applications where the original 107HSM063M is no longer available:

63RX30100M10X16 (Rubycon RX30 Series): This part maintains identical electrical specifications while extending the operating temperature upper limit to 130°C and providing higher ripple current capacity (315 mA @ 120 Hz, 450 mA @ 100 kHz). The part carries AEC-Q200 automotive qualification and ROHS3 compliance. Height increases to 0.709" (18.00mm), which is acceptable in most through-hole applications. Impedance is specified at 200 mOhms.

MAL214658101E3 (Vishay 146 RTI Series): This part extends lifetime to 2500 hours at 125°C and operating temperature range to -55°C to 125°C. It carries AEC-Q200 automotive qualification and ROHS3 compliance. Height remains at 0.689" (17.50mm), matching the original footprint. Impedance is specified at 220 mOhms. Ripple current at high frequency is 600 mA @ 100 kHz.

MAL214668101E3 (Vishay 146 RTI Series): This part is functionally equivalent to MAL214658101E3, offering 2500 hours lifetime at 125°C and -55°C to 125°C operating range. It carries AEC-Q200 automotive qualification and ROHS3 compliance. Height is 0.689" (17.50mm). Ripple current at low frequency is 300 mA @ 100 Hz. Impedance is 220 mOhms.

UBT1J101MPD8 (Nichicon UBT Series): This part provides extended lifetime of 3000 hours at 125°C with operating temperature range of -40°C to 125°C. Height is 0.709" (18.00mm). Ripple current capacity is 345 mA @ 120 Hz and 690 mA @ 100 kHz. Impedance is 410 mOhms. ROHS3 compliant.

UBW1J101MPD (Nichicon UBW Series): This part extends operating temperature to -55°C to 135°C with 2000 hours lifetime at 135°C. Height is 0.709" (18.00mm). Ripple current capacity is 345 mA @ 120 Hz and 690 mA @ 100 kHz. Impedance is 410 mOhms. ROHS3 compliant.

Similar Substitute (Active Status, Comparable Performance):

MAL214058101E3 (Vishay 140 RTM Series): This part offers 3000 hours lifetime at 125°C and operating temperature range of -55°C to 125°C. Height increases to 0.866" (22.00mm), which requires verification of available board space. Impedance is 160 mOhms. Ripple current at low frequency is 325 mA @ 100 Hz. ROHS3 compliant. This part is classified as similar rather than upgrade due to increased height, which may not fit in space-constrained applications.

Selection Criteria:

For applications with strict height constraints (≤0.689"), select MAL214658101E3 or MAL214668101E3
For automotive applications requiring AEC-Q200 qualification, select 63RX30100M10X16, MAL214658101E3, or MAL214668101E3
For extended temperature operation (-55°C lower limit), select MAL214658101E3, MAL214668101E3, UBW1J101MPD, or MAL214058101E3
For extended temperature operation (135°C upper limit), select UBW1J101MPD
For maximum lifetime rating, select UBT1J101MPD8 or MAL214058101E3 (both 3000 hours @ 125°C)
For highest ripple current capacity, select UBT1J101MPD8 or UBW1J101MPD (690 mA @ 100 kHz)

All substitute parts maintain the mandatory core parameters: 100 µF capacitance, ±20% tolerance, 63 V rating, polar configuration, through-hole mounting, radial can package, and 5.00mm lead spacing.

Frequently Asked Questions (FAQ)

Q1: Can I use any of these substitute parts as a direct replacement for the 107HSM063M?

A: Yes, all listed substitute parts are electrically and mechanically compatible with the 107HSM063M. All maintain 100 µF capacitance, ±20% tolerance, 63 V rating, polar configuration, through-hole mounting, radial can package, and 5.00mm lead spacing. However, verify available board height before selecting parts with increased seated height (0.709" or 0.866").

Q2: What is the difference between "Upgrade" and "Similar" substitute classifications?

A: Upgrade substitutes are active-status parts with enhanced electrical specifications (higher ripple current, extended lifetime, or extended temperature range) compared to the original 107HSM063M. Similar substitutes are active-status parts with comparable performance but may have dimensional variations (such as increased height) that require board-level verification.

Q3: Which substitute part has the smallest physical footprint?

A: MAL214658101E3 and MAL214668101E3 maintain the original seated height of 0.689" (17.50mm). All other substitute parts have heights of 0.709" (18.00mm) or 0.866" (22.00mm). If board space is constrained, these two Vishay parts are recommended.

Q4: Are all substitute parts RoHS compliant?

A: Yes, all substitute parts listed are ROHS3 compliant. The original 107HSM063M does not specify RoHS status.

Q5: Which substitute parts carry automotive qualification?

A: The following parts carry AEC-Q200 automotive qualification: 63RX30100M10X16 (Rubycon), MAL214658101E3 (Vishay), and MAL214668101E3 (Vishay). The Nichicon parts (UBT1J101MPD8 and UBW1J101MPD) and MAL214058101E3 do not specify AEC-Q200 qualification.

Q6: What is the difference between ESR and Impedance specifications?

A: ESR (Equivalent Series Resistance) and Impedance are related but measured under different conditions. The original 107HSM063M specifies ESR at 1.658 Ohm @ 120Hz. Substitute parts specify impedance values (ranging from 160 mOhms to 410 mOhms) typically measured at higher frequencies. Lower impedance values generally indicate better high-frequency performance.

Q7: Can I use the MAL214058101E3 if my PCB has limited height clearance?

A: No. The MAL214058101E3 has a seated height of 0.866" (22.00mm), which exceeds the original 0.689" (17.50mm) by 0.177" (5.50mm). Verify available clearance above the component before selection. For height-constrained applications, use MAL214658101E3 or MAL214668101E3.

Q8: Which substitute part offers the longest operational lifetime?

A: Both UBT1J101MPD8 (Nichicon) and MAL214058101E3 (Vishay) offer 3000 hours lifetime at 125°C, compared to the original 2000 hours. MAL214658101E3 and MAL214668101E3 offer 2500 hours at 125°C.

Q9: What is the maximum operating temperature for each substitute part?

A: Operating temperature upper limits are: 107HSM063M (125°C), 63RX30100M10X16 (130°C), MAL214658101E3 (125°C), MAL214668101E3 (125°C), UBT1J101MPD8 (125°C), UBW1J101MPD (135°C), and MAL214058101E3 (125°C). For applications requiring operation above 125°C, select UBW1J101MPD.

Q10: Are there any REACH compliance differences between substitute parts?

A: Yes. MAL214658101E3, MAL214668101E3, and MAL214058101E3 (all Vishay) specify REACH Unaffected status. UBT1J101MPD8 and UBW1J101MPD (both Nichicon) specify REACH Affected status. Verify REACH compliance requirements for your application before final part selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message