107HSM050M Equivalent & Substitute Parts Reference

Part Overview

The 107HSM050M is a 100 µF, 50 V aluminum electrolytic capacitor in radial, can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as obsolete, with 859 pieces currently in stock. The HSM series capacitor is designed for general-purpose applications requiring polar electrolytic storage with a ±20% capacitance tolerance and operating temperature range of -40°C to 125°C.

Due to the obsolete product status of the 107HSM050M, identifying equivalent and substitute parts is essential for design continuity, procurement planning, and long-term supply chain management. Substitute parts must maintain electrical equivalence in capacitance, voltage rating, and physical form factor while meeting or exceeding performance specifications.

Key Parameters

Parameter	107HSM050M Value
Capacitance	100 µF
Voltage - Rated	50 V
Tolerance	±20%
Polarization	Polar
Package / Case	Radial, Can
Lead Spacing	0.197" (5.00 mm)
Size / Dimension	0.394" Dia (10.00 mm)
Height - Seated (Max)	0.531" (13.50 mm)
Mounting Type	Through Hole
Operating Temperature	-40°C ~ 125°C
Lifetime @ Temp.	2000 Hrs @ 125°C
ESR (Equivalent Series Resistance)	1.658 Ohm @ 120 Hz
Ripple Current @ Low Frequency	180 mA @ 120 Hz
Ripple Current @ High Frequency	225 mA @ 10 kHz

Substitute Part Grouping Explanation

Substitute parts for the 107HSM050M are classified based on electrical and mechanical compatibility. All substitute candidates maintain the core electrical specifications: 100 µF capacitance, 50 V rated voltage, ±20% tolerance, and polar electrolytic construction. Physical compatibility is ensured through identical or compatible lead spacing (0.197" / 5.00 mm), case diameter (0.394" / 10.00 mm), and mounting type (through-hole, radial can).

Substitution logic is based on the following allowed parameters:

Capacitance: 100 µF (exact match required)
Voltage Rating: 50 V (exact match required)
Tolerance: ±20% (exact match required)
Package Type: Radial, Can (exact match required)
Lead Spacing: 0.197" (5.00 mm) (exact match required)
Case Diameter: 0.394" (10.00 mm) (exact match required)
Mounting Type: Through Hole (exact match required)
Polarization: Polar (exact match required)

Substitute parts are further differentiated by product status (active vs. obsolete), lifetime rating at temperature, operating temperature range, and compliance certifications. Parts are grouped into direct equivalents and upgrade options based on these secondary parameters.

Parameter Comparison

Parameter	107HSM050M	MAL214651101E3	50RX30100M10X12.5	B41866C6107M000	EGXL500EC3101MJC5S	EGXL500EC5101MJC5S	EGXL500ELL101MJC5S	MAL214661101E3	EEU-TA1H101
Manufacturer	Cornell Dubilier / Illinois Capacitor	Vishay Beyschlag/Draloric/BC Components	Rubycon	EPCOS - TDK Electronics	Chemi-Con	Chemi-Con	Chemi-Con	Vishay Beyschlag/Draloric/BC Components	Panasonic Electronic Components
Capacitance	100 µF	100 µF	100 µF	100 µF	100 µF	100 µF	100 µF	100 µF	100 µF
Voltage - Rated	50 V	50 V	50 V	50 V	50 V	50 V	50 V	50 V	50 V
Tolerance	±20%	±20%	±20%	±20%	±20%	±20%	±20%	±20%	±20%
Lead Spacing	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)
Size / Dimension	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)	0.394" Dia (10.00 mm)
Height - Seated (Max)	0.531" (13.50 mm)	0.531" (13.50 mm)	0.551" (14.00 mm)	0.531" (13.50 mm)	0.551" (14.00 mm)	0.551" (14.00 mm)	0.551" (14.00 mm)	0.531" (13.50 mm)	0.531" (13.50 mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can
Operating Temperature	-40°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 130°C	-55°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 125°C
Lifetime @ Temp.	2000 Hrs @ 125°C	2500 Hrs @ 125°C	2000 Hrs @ 130°C	3000 Hrs @ 125°C	5000 Hrs @ 125°C	5000 Hrs @ 125°C	5000 Hrs @ 125°C	2500 Hrs @ 125°C	2000 Hrs @ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active
Polarization	Polar	Polar	Polar	Polar	Polar	Polar	Polar	Polar	Polar

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the 107HSM050M. Selection among active alternatives should be based on product status, compliance certifications, and application requirements.

Direct Equivalents (Minimum Performance Match):

MAL214651101E3 and EEU-TA1H101 provide direct functional equivalence with identical or superior lifetime ratings. MAL214651101E3 carries AEC-Q200 automotive qualification and ROHS3 compliance. EEU-TA1H101 is rated for general-purpose applications with ROHS3 compliance and higher ripple current capability at high frequency (555 mA @ 100 kHz).

Upgrade Options (Enhanced Performance):

EGXL500EC3101MJC5S, EGXL500EC5101MJC5S, and EGXL500ELL101MJC5S (Chemi-Con GXL series) offer 5000 hours lifetime at 125°C, double the original specification. All three carry AEC-Q200 automotive ratings and ROHS3 compliance. These parts accommodate slightly increased height (0.551" vs. 0.531") and provide superior ripple current handling (590 mA @ 100 kHz).

MAL214661101E3 (Vishay 146 RTI series) provides 2500 hours lifetime with AEC-Q200 automotive qualification and extended operating temperature range (-55°C to 125°C).

50RX30100M10X12.5 (Rubycon RX30 series) offers 2000 hours lifetime at elevated temperature (130°C) with AEC-Q200 automotive rating and slightly increased height (0.551" vs. 0.531").

B41866C6107M000 (EPCOS B41866 series) delivers 3000 hours lifetime at 125°C with specified ESR of 373 mOhm @ 100 kHz and high ripple current capability (450 mA @ 100 kHz).

All substitute parts are REACH unaffected and classified under ECCN EAR99 and HTSUS 8532.22.0020, matching the original part's regulatory classification.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts as a direct replacement for the 107HSM050M?

A: Yes. All listed substitute parts maintain identical capacitance (100 µF), voltage rating (50 V), tolerance (±20%), lead spacing (0.197" / 5.00 mm), case diameter (0.394" / 10.00 mm), and through-hole radial can package. Physical and electrical compatibility is confirmed. Parts with height of 0.551" (14.00 mm) versus the original 0.531" (13.50 mm) require clearance verification in space-constrained layouts.

Q: What is the difference between direct equivalents and upgrade options?

A: Direct equivalents (MAL214651101E3, EEU-TA1H101) match or closely approach the original 107HSM050M specifications. Upgrade options provide enhanced performance characteristics such as extended lifetime ratings (2500–5000 hours vs. 2000 hours), higher ripple current capacity, or extended operating temperature ranges. Upgrade parts are all active products with current manufacturing status and compliance certifications.

Q: Are all substitute parts RoHS compliant?

A: All active substitute parts listed carry ROHS3 compliance. The original 107HSM050M does not specify RoHS status. All parts are REACH unaffected.

Q: Which substitute part has the longest lifetime rating?

A: EGXL500EC3101MJC5S, EGXL500EC5101MJC5S, and EGXL500ELL101MJC5S (Chemi-Con GXL series) all provide 5000 hours lifetime at 125°C, which is 2.5 times the original 2000-hour specification.

Q: Do any substitute parts have automotive qualification?

A: Yes. MAL214651101E3, 50RX30100M10X12.5, B41866C6107M000, EGXL500EC3101MJC5S, EGXL500EC5101MJC5S, EGXL500ELL101MJC5S, and MAL214661101E3 all carry AEC-Q200 automotive qualification. EEU-TA1H101 is rated for general-purpose applications without automotive certification.

Q: What is the maximum operating temperature for each substitute?

A: Operating temperature ranges vary: 107HSM050M, EGXL500EC3101MJC5S, EGXL500EC5101MJC5S, EGXL500ELL101MJC5S, and EEU-TA1H101 operate to 125°C. MAL214651101E3 and MAL214661101E3 extend to 125°C with lower temperature limit of -55°C. 50RX30100M10X12.5 operates to 130°C. B41866C6107M000 operates to 125°C with lower limit of -55°C.

Q: Are there height clearance concerns with any substitute parts?

A: Yes. 50RX30100M10X12.5, EGXL500EC3101MJC5S, EGXL500EC5101MJC5S, and EGXL500ELL101MJC5S have maximum seated height of 0.551" (14.00 mm), compared to the original 0.531" (13.50 mm). This 0.020" (0.50 mm) increase requires verification in PCB layouts with tight vertical constraints.

Q: Which substitute offers the best ripple current performance?

A: EGXL500EC3101MJC5S, EGXL500EC5101MJC5S, and EGXL500ELL101MJC5S provide the highest ripple current at high frequency: 590 mA @ 100 kHz. EEU-TA1H101 provides 555 mA @ 100 kHz. B41866C6107M000 provides 450 mA @ 100 kHz. The original 107HSM050M specifies 225 mA @ 10 kHz.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message