Equivalent & Substitute Parts for 106TLS035M

Part Overview

The 106TLS035M is a 10 µF, 35 V aluminum electrolytic capacitor in axial configuration manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for general-purpose applications requiring polarized capacitive energy storage. The TLS series capacitor operates across a temperature range of -40°C to 85°C with a rated lifetime of 2000 hours at 85°C.

Substitute parts become necessary when design requirements demand higher voltage ratings, extended operating temperature ranges, or improved ripple current handling capabilities while maintaining the same capacitance value and physical form factor.

Substiute Parts

106TLS035M

Cornell Dubilier / Illinois CapacitorIn Stock: 1088106TLS035M Datasheet

Current PartRFQ

106TMA050M

Cornell Dubilier / Illinois CapacitorIn Stock: 6097106TMA050M Datasheet

UpgradeRFQ

106TTA050M

Cornell Dubilier / Illinois CapacitorIn Stock: 4938106TTA050M Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 106TLS035M is determined by the following criteria:

Mandatory Matching Parameters:

• Capacitance: 10 µF (exact match required)
• Tolerance: ±20% (exact match required)
• Package / Case: Axial, Can (exact match required)
• Size / Dimension: 0.197" Dia x 0.512" L (5.00mm x 13.00mm) (exact match required)
• Mounting Type: Through Hole (exact match required)
• Polarization: Polar (exact match required)

Allowable Variation Parameters:

• Voltage - Rated: May be equal to or greater than 35 V
• Operating Temperature Range: May extend beyond -40°C to 85°C
• Lifetime @ Temperature: May be equal to or greater than 2000 Hrs @ 85°C
• ESR @ 120Hz: Must remain within acceptable tolerance for the application
• Ripple Current: May be equal to or greater than specified values

The substitute parts 106TMA050M and 106TTA050M both maintain identical capacitance, tolerance, physical dimensions, and mounting configuration while providing upgraded voltage ratings of 50 V. Both substitutes are manufactured by Cornell Dubilier / Illinois Capacitor and maintain ROHS3 compliance and RoHS Unaffected status.

Parameter Comparison

Engineering Selection Recommendations

106TMA050M Selection Criteria:

The 106TMA050M provides a voltage upgrade from 35 V to 50 V while maintaining identical ESR characteristics. This substitute extends the maximum operating temperature to 105°C, offering enhanced thermal performance. The TMA series is suitable for applications requiring higher voltage margins or extended temperature operation. All three components maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment across product generations.

106TTA050M Selection Criteria:

The 106TTA050M also provides a 50 V voltage upgrade with identical ESR and maintains the original -40°C to 85°C operating temperature range. This substitute preserves the ripple current specification at 50 mA @ 120 Hz, matching the original 106TLS035M performance. The TTA series is appropriate for direct replacement in applications where voltage margin improvement is the primary design objective without requiring extended temperature operation.

Both substitute parts maintain Active product status and are manufactured by the same supplier, ensuring consistent quality and availability. Selection between 106TMA050M and 106TTA050M depends on whether extended temperature operation to 105°C is required for the application.

Frequently Asked Questions (FAQ)

Q: Can 106TMA050M or 106TTA050M be used as direct replacements for 106TLS035M?

A: Yes. Both substitute parts maintain identical capacitance (10 µF), tolerance (±20%), physical dimensions (0.197" Dia x 0.512" L), package configuration (Axial, Can), and mounting type (Through Hole). The 50 V voltage rating is compatible with circuits designed for 35 V operation.

Q: What is the primary difference between 106TMA050M and 106TTA050M?

A: The 106TMA050M operates to 105°C maximum temperature with 2000 hour lifetime at 105°C. The 106TTA050M operates to 85°C maximum temperature with 2000 hour lifetime at 85°C. Both maintain 50 V voltage rating and identical ESR specifications.

Q: Are there any ripple current differences between the main part and substitutes?

A: The 106TLS035M and 106TTA050M both specify 50 mA @ 120 Hz ripple current. The 106TMA050M specifies 41 mA @ 120 Hz. The 106TTA050M additionally specifies 85 mA @ 50 kHz ripple current capability.

Q: Do all three parts meet the same compliance standards?

A: Yes. All three components are ROHS3 Compliant and REACH Unaffected. All maintain Active product status and are manufactured by Cornell Dubilier / Illinois Capacitor.

Q: What is the ESR difference between these parts?

A: The 106TLS035M and 106TMA050M both specify 19.894 Ohm @ 120Hz. The 106TTA050M specifies 19.8944 Ohm @ 120Hz. These values are functionally equivalent for general-purpose applications.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. All three parts share identical physical dimensions and axial lead configuration, allowing direct PCB footprint compatibility. No layout modifications are required for substitution.