106SML016M Equivalent & Substitute Parts

Part Overview

The 106SML016M is a 10 µF, 16 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is rated for general purpose applications with a 2000-hour lifetime at 85°C and operates across the temperature range of -40°C to 85°C. The part is currently active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Substitute parts are necessary when the original component becomes unavailable, when design requirements demand enhanced performance characteristics such as higher voltage ratings or improved ESR specifications, or when alternative manufacturers' components are preferred for supply chain optimization.

Key Parameters

Parameter	Value	Unit
Capacitance	10	µF
Voltage - Rated	16	V
Tolerance	±20%	-
ESR @ 120Hz	33.16	Ohm
Lifetime @ Temperature	2000 Hrs @ 85°C	-
Operating Temperature Range	-40°C to 85°C	-
Ripple Current @ 120 Hz	26	mA
Ripple Current @ 100 kHz	39	mA
Size / Dimension	0.157" Dia (4.00mm)	-
Height - Seated (Max)	0.217" (5.50mm)	-
Surface Mount Land Size	0.169" L x 0.169" W (4.30mm x 4.30mm)	-
Mounting Type	Surface Mount	-
Package / Case	Radial, Can - SMD	-
Polarization	Polar	-
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitute parts for the 106SML016M are classified into two categories based on electrical and mechanical compatibility:

Upgrade Substitutes maintain identical capacitance (10 µF) and tolerance (±20%) while offering enhanced voltage ratings or improved thermal performance. These parts are direct functional upgrades suitable for applications where higher voltage margins or extended lifetime at elevated temperatures are beneficial.

Parametric Equivalents match the core electrical specifications (10 µF capacitance, 16 V rating, ±20% tolerance) and physical dimensions (4.00mm diameter, 5.50mm height, 4.30mm x 4.30mm land size) while originating from alternative manufacturers. These parts satisfy identical circuit requirements and are mechanically interchangeable.

The critical parameters determining substitution eligibility are:

Capacitance value: 10 µF (fixed)
Voltage rating: 16 V minimum (upgrades may exceed this)
Tolerance: ±20% (fixed)
Physical dimensions: 0.157" diameter, 0.217" maximum height
Surface mount land size: 0.169" L x 0.169" W
Mounting type: Surface Mount
Package type: Radial, Can - SMD
Polarization: Polar

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	ESR @ 120Hz	Lifetime @ Temp	Operating Temp Range	Size (Dia)	Height (Max)	Land Size	Product Status	RoHS Status
106SML016M	Cornell Dubilier / Illinois Capacitor	10 µF	16 V	±20%	33.16 Ohm	2000 Hrs @ 85°C	-40°C ~ 85°C	0.157" (4.00mm)	0.217" (5.50mm)	0.169" x 0.169" (4.30mm x 4.30mm)	Active	ROHS3 Compliant
106SML035MD4	Cornell Dubilier / Illinois Capacitor	10 µF	35 V	±20%	23.21 Ohm	2000 Hrs @ 85°C	-40°C ~ 85°C	0.157" (4.00mm)	0.217" (5.50mm)	0.169" x 0.169" (4.30mm x 4.30mm)	Active	ROHS3 Compliant
ATB106M025	Cornell Dubilier / Illinois Capacitor	10 µF	25 V	±20%	18.57 Ohm	3000 Hrs @ 105°C	-55°C ~ 105°C	0.157" (4.00mm)	0.224" (5.70mm)	0.169" x 0.189" (4.30mm x 4.80mm)	Active	ROHS3 Compliant
MAL215375109E3	Vishay Beyschlag/Draloric/BC Components	10 µF	16 V	±20%	8 Ohm @ 100kHz	2000 Hrs @ 105°C	-55°C ~ 105°C	0.157" (4.00mm)	0.209" (5.30mm)	0.169" x 0.169" (4.30mm x 4.30mm)	Active	ROHS3 Compliant
NACE100M16V4X5.5TR13F	NIC Components Corp	10 µF	16 V	±20%	26.5 Ohm @ 120Hz	2000 Hrs @ 85°C	-40°C ~ 85°C	0.157" (4.00mm)	0.217" (5.50mm)	0.169" x 0.169" (4.30mm x 4.30mm)	Active	RoHS Compliant
UWJ1C100MCL1GB	Nichicon	10 µF	16 V	±20%	Not Specified	2000 Hrs @ 85°C	-40°C ~ 85°C	0.157" (4.00mm)	0.217" (5.50mm)	0.169" x 0.169" (4.30mm x 4.30mm)	Obsolete	ROHS3 Compliant
VE-100M1CTR-0405S	SURGE	10 µF	16 V	±20%	Not Specified	2000 Hrs @ 85°C	-40°C ~ 85°C	0.157" (4.00mm)	0.217" (5.50mm)	0.169" x 0.169" (4.30mm x 4.30mm)	Active	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Parametric Equivalents):

The NACE100M16V4X5.5TR13F from NIC Components Corp and VE-100M1CTR-0405S from SURGE are parametric equivalents that match the 106SML016M across all critical electrical and mechanical specifications. Both parts maintain 10 µF capacitance, 16 V voltage rating, ±20% tolerance, identical physical dimensions, and surface mount compatibility. NACE100M16V4X5.5TR13F is RoHS compliant and active in production. VE-100M1CTR-0405S is ROHS3 compliant and active in production.

The MAL215375109E3 from Vishay Beyschlag/Draloric/BC Components is a parametric equivalent with identical capacitance, voltage, and tolerance specifications. This part features superior ESR performance (8 Ohm @ 100kHz versus 33.16 Ohm @ 120Hz on the original) and extended operating temperature range (-55°C to 105°C). The part is active in production and ROHS3 compliant.

The UWJ1C100MCL1GB from Nichicon is a parametric equivalent with matching electrical specifications and physical dimensions. This part is currently obsolete and should be selected only when new production alternatives are unavailable.

For Enhanced Performance (Upgrade Substitutes):

The 106SML035MD4 from Cornell Dubilier / Illinois Capacitor provides a higher voltage rating (35 V versus 16 V) while maintaining identical capacitance and tolerance. This upgrade reduces ESR to 23.21 Ohm and is suitable for applications requiring increased voltage margin. The part is active in production and ROHS3 compliant.

The ATB106M025 from Cornell Dubilier / Illinois Capacitor offers a 25 V voltage rating with significantly improved ESR (18.57 Ohm), extended lifetime (3000 Hrs @ 105°C), and wider operating temperature range (-55°C to 105°C). This part is optimized for bypass and decoupling applications and is active in production with ROHS3 compliance. Note that the height increases to 0.224" (5.70mm) and land size expands to 0.169" L x 0.189" W, requiring PCB layout verification.

Frequently Asked Questions (FAQ)

Q: Can the 106SML035MD4 be used as a direct replacement for the 106SML016M?

A: The 106SML035MD4 is mechanically and electrically compatible with identical capacitance (10 µF), tolerance (±20%), physical dimensions (4.00mm diameter, 5.50mm height), and surface mount land size (4.30mm x 4.30mm). The higher voltage rating (35 V versus 16 V) does not prevent substitution; it provides additional voltage margin. Both parts are from the same manufacturer and series (SML). Substitution is valid for circuits operating at 16 V or below.

Q: What is the difference between parametric equivalents and upgrade substitutes?

A: Parametric equivalents match the original part's electrical specifications (10 µF, 16 V, ±20% tolerance) and physical dimensions exactly, originating from different manufacturers. Upgrade substitutes maintain the same capacitance and tolerance but offer enhanced characteristics such as higher voltage ratings, lower ESR, extended lifetime, or wider temperature ranges. Upgrade substitutes are suitable when improved performance is beneficial but not required for basic circuit operation.

Q: Is the ATB106M025 compatible with the 106SML016M PCB layout?

A: The ATB106M025 maintains the same diameter (4.00mm) and is mechanically compatible. However, the height increases from 5.50mm to 5.70mm and the surface mount land size expands from 4.30mm x 4.30mm to 4.30mm x 4.80mm. PCB layout verification is required to confirm adequate clearance and land pattern compatibility before substitution.

Q: Why is the UWJ1C100MCL1GB listed as obsolete?

A: The UWJ1C100MCL1GB from Nichicon is marked as obsolete in the current product status. While the part remains electrically and mechanically compatible with the 106SML016M, new production is discontinued. This part should be selected only when existing inventory is available and alternative active production parts are unsuitable.

Q: What are the key advantages of the MAL215375109E3 over the 106SML016M?

A: The MAL215375109E3 provides significantly lower ESR (8 Ohm @ 100kHz versus 33.16 Ohm @ 120Hz), extended operating temperature range (-55°C to 105°C versus -40°C to 85°C), and higher temperature lifetime rating (2000 Hrs @ 105°C versus 2000 Hrs @ 85°C). These characteristics make it suitable for applications requiring improved thermal performance and reduced impedance. The part is active in production and ROHS3 compliant.

Q: Are all substitute parts ROHS3 compliant?

A: Most substitute parts are ROHS3 compliant. The NACE100M16V4X5.5TR13F is RoHS compliant (not specifically ROHS3). All other substitute parts listed are ROHS3 compliant. Compliance status should be verified against specific procurement requirements.

Q: Can the 106SML016M be replaced with a higher capacitance value?

A: No. All substitute parts listed maintain the 10 µF capacitance value. Substitution with different capacitance values requires circuit redesign and is outside the scope of equivalent part selection.

Q: What packaging formats are available for substitute parts?

A: The 106SML016M is supplied in Bulk packaging. Substitute parts are available in alternative packaging formats: MAL215375109E3 and NACE100M16V4X5.5TR13F are supplied in Tape & Reel (TR) format; VE-100M1CTR-0405S is supplied in Cut Tape (CT) format. Packaging format selection depends on assembly process requirements and procurement volume.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message