106MABA02KJS Film Capacitor - Equivalent & Substitute Parts

Part Overview

The 106MABA02KJS is a 10 µF film capacitor rated for 600V DC operation, manufactured by Cornell Dubilier / Illinois Capacitor. This polypropylene (PP) metallized radial capacitor is designed for motor run applications. The part is classified as obsolete, making identification of active equivalent and substitute components essential for continued equipment maintenance and new design implementations.

Substiute Parts

106MABA02KJS

Cornell Dubilier / Illinois CapacitorIn Stock: 950106MABA02KJS Datasheet

Current PartRFQ

B32756G8106K000

EPCOS - TDK ElectronicsIn Stock: 1257B32756G8106K000 Datasheet

SimilarRFQ

MABA025100KJL

NichiconIn Stock: 794MABA025100KJL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 106MABA02KJS is determined by strict compatibility across the following critical electrical parameters: capacitance (10 µF), tolerance (±10%), DC voltage rating (600V), dielectric material (polypropylene metallized), mounting type (through hole radial), lead spacing (37.50mm), and termination type (PC pins).

Two substitute parts meet these criteria:

B32756G8106K000 (EPCOS - TDK Electronics) – Direct electrical equivalent with matching capacitance, tolerance, and voltage ratings. AC voltage rating is 350V (higher than the original 320V). Operating temperature range extends to 105°C. Physical dimensions are within acceptable tolerance (length 42.00mm vs. 42.50mm, identical width and lead spacing). Product status is active, ensuring ongoing availability.

MABA025100KJL (Nichicon) – Parametric equivalent within the same MAB series. Matches all critical electrical parameters including AC voltage rating (320V), temperature range (-40°C ~ 100°C), and physical dimensions. Product status is active. Furnishes cross-compatibility based on series designation and mechanical fit.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are active products with current manufacturing status, unlike the obsolete 106MABA02KJS.

B32756G8106K000 is recommended when AC voltage operation or thermal performance exceeding 100°C is required. The elevated AC voltage rating (350V) and extended temperature range (-40°C ~ 105°C) provide performance margin for demanding motor run applications. This part is available in bulk packaging. Seated height is 5.50mm greater than the main part; verify PCB clearance before board-level substitution.

MABA025100KJL is recommended for direct mechanical and electrical compatibility within existing designs. Identical physical dimensions, identical temperature range, and matching AC voltage rating (320V) to the original part ensure drop-in replacement capability. This part shares the MAB series designation with the original component, indicating compatibility within that product family.

Both parts satisfy ROHS3 compliance and carry EAR99 export classification, matching the regulatory status of the main part.

Frequently Asked Questions (FAQ)

Q: Can B32756G8106K000 be used in place of 106MABA02KJS without circuit modification? A: Electrical compatibility is confirmed across capacitance, tolerance, and DC voltage ratings. However, the seated height difference (42.50mm versus 37.00mm) requires PCB clearance verification. AC voltage ratings differ (350V vs. 320V), providing operational margin. Confirm mechanical fit before installation.

Q: What is the significance of the MAB series designation for MABA025100KJL? A: The MAB series designation indicates the part belongs to the same product family as the original 106MABA02KJS. This series commonality, combined with identical electrical parameters and physical dimensions, establishes parametric equivalence for motor run capacitor applications.

Q: Are both substitute parts suitable for motor run applications? A: MABA025100KJL is designated for motor run applications, matching the original part's intended use. B32756G8106K000 is designated for general purpose applications but maintains all electrical parameters required for motor run service.

Q: What environmental or compliance factors affect part selection? A: All three parts maintain ROHS3 compliance and EAR99 export classification. MSL ratings differ: the original part carries MSL 1 (unlimited), while both substitutes carry MSL Not Applicable, indicating no moisture sensitivity limitations. For applications in humid or temperature-cycled environments, either substitute remains acceptable.

Q: Can lead spacing variations affect substitution suitability? A: Lead spacing is identical across all three parts at 37.50mm. PCB footprint compatibility is assured. The primary dimensional variation is seated height for B32756G8106K000, which requires clearance confirmation in existing designs.