Weidmüller 1069380000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1069380000 is a 4-position terminal block plug with female sockets, 5mm pitch, and 90° wire entry orientation. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new designs requiring compatible connectivity solutions. The part features screw-clamping termination, free-hanging mounting, and operates across -50°C to 120°C with UL94 V-0 flammability rating.

Substiute Parts

1069380000

WeidmüllerIn Stock: 12161069380000 Datasheet

Current PartRFQ

796640-4

TE Connectivity AMP ConnectorsIn Stock: 801796640-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 1069380000 is determined by the following critical parameters:

• Connector Type & Position Count: Both main and substitute parts must be 4-position terminal block plugs with female sockets
• Pitch Compatibility: 5mm (0.197") pitch is the primary mechanical compatibility criterion
• Electrical Ratings: Substitute parts must meet or exceed UL voltage (300 V) and current (10 A) specifications
• Wire Gauge Accommodation: Substitute must accept wire gauges within or overlapping the 12-26 AWG range
• Mounting Configuration: Free-hanging (in-line) mounting type must be maintained
• Termination Method: Screw-based termination is required for mechanical compatibility
• Flammability & Compliance: UL94 V-0 rating and RoHS compliance are mandatory for equivalent substitution

The TE Connectivity AMP Connectors 796640-4 qualifies as a substitute based on matching pitch, position count, mounting type, termination method, voltage rating, and compliance certifications, despite differences in wire entry angle and specific clamping mechanism.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 796640-4 is an active product with current manufacturing status, providing supply continuity for applications currently using the obsolete Weidmüller 1069380000. Both parts maintain UL94 V-0 flammability compliance and meet 300 V UL voltage requirements.

Key considerations for substitution:

• Wire Entry Angle: The substitute features 180° (straight) wire entry versus the original 90° orientation. Physical space constraints and cable routing must be evaluated for each application.
• Clamping Mechanism: The substitute uses rising cage clamp termination instead of clamping yoke tension sleeve. Both are screw-based methods suitable for equivalent wire retention.
• Current Rating: The substitute provides 15 A capacity, exceeding the original 10 A specification, offering improved margin for applications with variable load conditions.
• Wire Gauge Flexibility: The substitute accommodates 12-30 AWG (0.05-3mm²), providing broader wire size compatibility than the original 12-26 AWG range.
• Temperature Range: The original part operates to -50°C; the substitute operates to -40°C. Applications requiring sub-40°C operation require verification of thermal performance.
• Screw Size Difference: M3 screws on the substitute versus M2.5 on the original require torque specification adjustment (0.79 Nm versus 0.4-0.6 Nm).

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 796640-4 directly replace the Weidmüller 1069380000 in existing assemblies?

A: Direct mechanical replacement is possible due to matching 5mm pitch and 4-position configuration. However, the 180° wire entry angle differs from the original 90° orientation. Physical installation space and cable routing must be verified before substitution. Screw torque specifications differ and must be adjusted accordingly.

Q: Are there electrical compatibility concerns between these parts?

A: Both parts meet 300 V UL voltage and maintain UL94 V-0 flammability ratings. The substitute's 15 A current rating exceeds the original 10 A specification. Wire gauge ranges overlap sufficiently for most applications, though the substitute accommodates finer gauges (down to 0.05mm²) and larger gauges (up to 3mm²).

Q: What is the impact of different termination methods?

A: The original uses clamping yoke tension sleeve termination; the substitute uses rising cage clamp termination. Both are screw-based methods providing equivalent wire retention. Screw torque specifications differ: original requires 0.4-0.6 Nm (M2.5), substitute requires 0.79 Nm (M3). Proper torque application is critical for reliable connection.

Q: Does the temperature range difference affect substitution suitability?

A: The original operates -50°C to 120°C; the substitute operates -40°C to 110°C. Applications requiring operation below -40°C or above 110°C require alternative solutions. Most industrial applications operate within the substitute's range.

Q: Are there compliance or certification differences?

A: Both parts are UL94 V-0 rated. The original is RoHS Compliant; the substitute is ROHS3 Compliant, representing an updated compliance standard. Both carry EAR99 ECCN classification and identical HTSUS codes, indicating equivalent regulatory treatment.

Q: What packaging considerations apply to the substitute?

A: The original is listed with unspecified packaging; the substitute is supplied in bulk packaging. Verify bulk packaging specifications against assembly line requirements and component handling procedures.