TE Connectivity 106510-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 106510-1 is a 175-position backplane connector header with male pins, featuring 0.079" (2.00mm) pitch and press-fit termination. This connector is designed for through-hole mounting applications requiring high-density interconnection across 5 + 2 rows. The part is currently active in production with 982 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable, when different packaging requirements are needed, or when compliance specifications differ from project requirements.

Substiute Parts

106510-1

TE Connectivity AMP ConnectorsIn Stock: 1075106510-1 Datasheet

Current PartRFQ

5106510-1

TE Connectivity AMP ConnectorsIn Stock: 15475106510-1 Datasheet

DirectRFQ

17021751201

HARTINGIn Stock: 105017021751201 Datasheet

SimilarRFQ

HM2P08PD5111N9LF

Amphenol ICC (FCI)In Stock: 1602HM2P08PD5111N9LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 106510-1 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 175 (125 + 50 Ground)
• Pitch: 0.079" (2.00mm)
• Connector Type: Header, Male Pins
• Connector Style: B 25
• Number of Rows: 5 + 2
• Mounting Type: Through Hole
• Termination: Press-Fit
• Operating Temperature Range: -55°C ~ 125°C
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Packaging format (tube, tray, or bulk)
• Contact finish thickness specifications
• Current rating (when equal to or exceeding 1.5 A)
• Voltage rating (when equal to or exceeding 500Vrms)
• RoHS and REACH compliance status
• Manufacturer identity

All identified substitute parts meet the mandatory matching parameters. Variations in packaging, compliance certifications, and electrical ratings are noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5106510-1 (Direct Equivalent)

The 5106510-1 is a direct equivalent to the 106510-1, manufactured by TE Connectivity within the same Z-PACK series. Both parts share identical electrical and mechanical specifications. The primary distinction is packaging format (tube versus bulk) and RoHS compliance status. The 5106510-1 is RoHS Compliant, whereas the 106510-1 is RoHS non-compliant. Selection of the 5106510-1 is appropriate when RoHS compliance is required or when tube packaging is preferred for inventory management. REACH status for the 5106510-1 is listed as Vendor Undefined.

HARTING 17021751201 (Cross-Manufacturer Substitute)

The HARTING 17021751201 is a cross-manufacturer substitute from the har-bus® HM series. All mechanical and thermal parameters align with the primary part. The current rating for this part is 1 A, which is lower than the 1.5 A rating of the primary part. Voltage rating is not specified. The 17021751201 is ROHS3 Compliant and REACH Unaffected. Selection of this part is appropriate when cross-manufacturer sourcing is required and the 1 A current rating is sufficient for the application.

Amphenol ICC HM2P08PD5111N9LF (Cross-Manufacturer Substitute)

The Amphenol ICC HM2P08PD5111N9LF is a cross-manufacturer substitute from the Millipacs® series. All mechanical and thermal parameters align with the primary part. The current rating is 1.5 A and the voltage rating is 750Vrms, both meeting or exceeding the primary part specifications. Contact finish thickness is specified as flash. The HM2P08PD5111N9LF is RoHS Compliant and REACH Affected. Selection of this part is appropriate when Amphenol ICC sourcing is required or when higher voltage rating (750Vrms) is beneficial.

Frequently Asked Questions (FAQ)

Q: Can the 5106510-1 be used as a direct replacement for the 106510-1?

A: Yes. The 5106510-1 is electrically and mechanically identical to the 106510-1. Both are manufactured by TE Connectivity and share the same connector specifications, pitch, position count, and operating temperature range. The primary differences are packaging format (tube versus bulk) and RoHS compliance status.

Q: What is the significance of the current rating difference between the HARTING 17021751201 (1 A) and the primary part (1.5 A)?

A: The current rating indicates the maximum continuous current the connector can safely carry. The HARTING part is rated for 1 A, while the primary part is rated for 1.5 A. Selection of the HARTING part requires verification that the application current does not exceed 1 A.

Q: Are all substitute parts compatible with the same PCB footprint?

A: All substitute parts share identical mechanical specifications: 175 positions, 0.079" (2.00mm) pitch, B 25 connector style, 5 + 2 row configuration, and through-hole mounting. PCB footprint compatibility is confirmed across all listed parts.

Q: What packaging options are available?

A: The 106510-1 is supplied in bulk packaging. The 5106510-1 is supplied in tube packaging. The 17021751201 is supplied in tube packaging. The HM2P08PD5111N9LF is supplied in tray packaging. Packaging selection depends on inventory management and handling requirements.

Q: Which substitute part should be selected for RoHS-compliant applications?

A: Both the 5106510-1 (RoHS Compliant) and HM2P08PD5111N9LF (RoHS Compliant) meet RoHS compliance requirements. The 17021751201 is ROHS3 Compliant. The primary part 106510-1 is RoHS non-compliant.

Q: What is the difference between REACH Affected and REACH Unaffected status?

A: REACH Affected indicates the part contains substances subject to REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) regulations. REACH Unaffected indicates the part does not contain such substances. The 17021751201 is REACH Unaffected, while the 106510-1 and HM2P08PD5111N9LF are REACH Affected.

Q: Can the HM2P08PD5111N9LF be used in applications requiring 500Vrms?

A: Yes. The HM2P08PD5111N9LF is rated for 750Vrms, which exceeds the 500Vrms requirement of the primary part. This part is suitable for applications requiring 500Vrms or lower voltage ratings.

Q: Are all parts available in current inventory?

A: Yes. All listed parts are currently in stock: 106510-1 (982 units), 5106510-1 (1530 units), 17021751201 (969 units), and HM2P08PD5111N9LF (1515 units).