Request Quote
(Ships tomorrow)
TE Connectivity 106164-1 Equivalent & Substitute Parts
Part Overview
The TE Connectivity 106164-1 is a 110 Position Header connector with male pins, 0.079" (2.00mm) pitch, designed for backplane applications using press-fit termination. This connector is classified as obsolete product status. The Z-PACK series connector features through-hole mounting with alignment strip and board guide features, rated for 1.5 A at 500Vrms across an operating temperature range of -55°C to 125°C.
Due to obsolete product status, equivalent and substitute connectors from active product lines are necessary to support ongoing design requirements and procurement needs. Direct manufacturer alternatives and cross-compatible options from qualified suppliers are available with enhanced compliance certifications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Number of Positions | 110 |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 |
| Connector Type | Header, Male Pins |
| Connector Style | A 22 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Current Rating | 1.5 A |
| Voltage Rating | 500Vrms (main) / 750Vrms (substitutes) |
| Operating Temperature | -55°C to 125°C |
| Contact Finish | Gold |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution logic for the TE Connectivity 106164-1 is based on the following critical parameters that must remain constant across equivalent parts:
Core Electrical and Mechanical Compatibility Parameters:
- Number of Positions: 110
- Pitch: 0.079" (2.00mm)
- Number of Rows: 5
- Connector Type: Header, Male Pins
- Connector Style: A 22
- Mounting Type: Through Hole
- Termination: Press-Fit
- Current Rating: 1.5 A
- Operating Temperature: -55°C to 125°C
- Contact Finish: Gold
Direct Equivalent (Identical Specifications): The part 5106164-1 from TE Connectivity AMP Connectors is a direct equivalent with all parameters matching the 106164-1, with the primary distinction being active product status and RoHS3 compliance.
Compatible Alternatives (Functionally Equivalent with Enhanced Ratings): Amphenol ICC (FCI) Millipacs® series connectors HM2P07PD5110N9LF, HM2P07PDE120L9LF, HM2P07PDE120N9LF, and HM2P07PDN1Y0N9LLF maintain identical 110-position, 2.00mm pitch, 5-row configurations with press-fit termination. These alternatives feature enhanced voltage ratings (750Vrms versus 500Vrms) and RoHS compliance, providing superior electrical performance within the same mechanical envelope.
Extended Position Variants (Not Direct Substitutes): Parts HM2P07PD5111N9LF, HM2P07PDP255N9LF, HM2P07PDP261N9LF, HM2P07PDP265N9LF, and HM2P07PDT211N9LF feature increased position counts (132 or 154 positions) with additional ground rows. These are not direct substitutes but represent expanded connector options for applications requiring additional signal or ground paths.
Parameter Comparison
| Part Number | Manufacturer | Positions | Rows | Pitch | Voltage Rating | Current Rating | RoHS Status | Product Status | Packaging |
|---|---|---|---|---|---|---|---|---|---|
| 106164-1 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 500Vrms | 1.5 A | Non-compliant | Obsolete | Bulk |
| 5106164-1 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 500Vrms | 1.5 A | RoHS3 Compliant | Active | Tube |
| HM2P07PD5110N9LF | Amphenol ICC (FCI) | 110 | 5 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDE120L9LF | Amphenol ICC (FCI) | 110 | 5 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDE120N9LF | Amphenol ICC (FCI) | 110 | 5 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDN1Y0N9LLF | Amphenol ICC (FCI) | 110 | 5 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PD5111N9LF | Amphenol ICC (FCI) | 154 (110+44G) | 5+2 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDP255N9LF | Amphenol ICC (FCI) | 132 (110+22G) | 5+1 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDP261N9LF | Amphenol ICC (FCI) | 154 (110+44G) | 5+2 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDP265N9LF | Amphenol ICC (FCI) | 132 (110+22G) | 5+1 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
| HM2P07PDT211N9LF | Amphenol ICC (FCI) | 154 (110+44G) | 5+2 | 0.079" (2.00mm) | 750Vrms | 1.5 A | RoHS Compliant | Active | Tray |
Engineering Selection Recommendations
Primary Recommendation: TE Connectivity 5106164-1
The 5106164-1 is the direct successor to the obsolete 106164-1. This part maintains identical electrical and mechanical specifications while providing RoHS3 compliance and active product status. Selection of this part eliminates obsolescence risk and ensures long-term supply chain stability. The part is available in tube packaging with 1516 pieces in current inventory.
Secondary Recommendation: Amphenol ICC HM2P07PD5110N9LF
For applications where enhanced voltage performance is beneficial, the HM2P07PD5110N9LF provides a functionally equivalent 110-position, 2.00mm pitch connector with upgraded 750Vrms voltage rating. This part maintains identical current rating, operating temperature range, and mechanical form factor while offering RoHS compliance. The Millipacs® series connector is available in tray packaging with 1817 pieces in inventory.
Alternative Options: HM2P07PDE120L9LF, HM2P07PDE120N9LF, HM2P07PDN1Y0N9LLF
These three Amphenol ICC alternatives provide identical 110-position configurations with 750Vrms ratings and RoHS compliance. Selection among these variants depends on specific contact finish requirements and connector feature specifications. All three maintain active product status with adequate inventory levels.
Extended Position Variants: HM2P07PD5111N9LF, HM2P07PDP255N9LF, HM2P07PDP261N9LF, HM2P07PDP265N9LF, HM2P07PDT211N9LF
These parts are not direct substitutes due to increased position counts (132 or 154 positions). Selection of these variants is appropriate only when application requirements specify additional signal or ground paths beyond the standard 110-position configuration.
Frequently Asked Questions (FAQ)
Q: Can the TE Connectivity 5106164-1 be used as a direct replacement for the obsolete 106164-1?
A: Yes. The 5106164-1 is the direct equivalent with identical electrical and mechanical specifications. The primary differences are active product status, RoHS3 compliance, and tube packaging. All pin configurations, pitch, voltage, current, and temperature ratings remain unchanged.
Q: What is the primary advantage of Amphenol ICC HM2P07PD5110N9LF over the TE Connectivity alternatives?
A: The HM2P07PD5110N9LF provides an enhanced voltage rating of 750Vrms compared to the 500Vrms rating of the 106164-1 and 5106164-1. This higher voltage capability provides additional design margin for applications operating near voltage limits. All other electrical and mechanical parameters remain equivalent.
Q: Are the extended position variants (132 or 154 positions) compatible with existing PCB designs for the 110-position connector?
A: No. Extended position variants feature different row configurations and increased overall connector dimensions. These parts are not mechanically compatible with existing PCB layouts designed for 110-position connectors and require new board designs.
Q: What packaging differences exist between the substitute parts?
A: The TE Connectivity 5106164-1 is supplied in tube packaging, while all Amphenol ICC Millipacs® series alternatives are supplied in tray packaging. Packaging selection may affect handling procedures and inventory management but does not impact electrical or mechanical performance.
Q: Are all substitute parts RoHS compliant?
A: The TE Connectivity 5106164-1 is RoHS3 compliant. All Amphenol ICC Millipacs® series alternatives are RoHS compliant. The original 106164-1 is RoHS non-compliant. For applications requiring RoHS compliance, selection of either the 5106164-1 or any Amphenol ICC alternative is necessary.
Q: Can the 106164-1 be used interchangeably with HM2P07PDE120L9LF in new designs?
A: Yes, for applications where the 750Vrms rating of the HM2P07PDE120L9LF is acceptable. Both connectors maintain identical 110-position, 2.00mm pitch, 5-row configurations with press-fit termination and 1.5 A current rating. The Amphenol ICC part provides enhanced voltage performance and RoHS compliance.
Q: What is the operating temperature range for all substitute parts?
A: All substitute parts maintain the same operating temperature range as the original 106164-1: -55°C to 125°C. Temperature performance is consistent across all equivalent and substitute options.
Q: Are contact finish specifications identical across all substitute parts?
A: All parts feature gold contact finish. The original 106164-1 specifies 30.0µin (0.76µm) contact finish thickness. Amphenol ICC alternatives specify flash gold finish thickness. Both finishes provide equivalent electrical performance and corrosion resistance for the specified applications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts