TE Connectivity AMP 1060875-1 MCX Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP 1060875-1 is an MCX connector plug with male pin configuration, designed for 50-ohm coaxial cable applications. This connector features crimp termination for both center contact and shield, operates across a frequency range up to 6 GHz, and is rated for 500 mating cycles. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility for RF coaxial connector applications.

Substiute Parts

1060875-1

TE Connectivity AMP ConnectorsIn Stock: 9011060875-1 Datasheet

Current PartRFQ

0733660300

MolexIn Stock: 9640733660300 Datasheet

DirectRFQ

11_MCX-50-2-15/133_NH

Huber+Suhner, Inc.In Stock: 72811_MCX-50-2-15/133_NH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity AMP 1060875-1 is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

• Connector Style: MCX
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Contact Termination: Crimp
• Shield Termination: Crimp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Snap-On
• Frequency - Max: 6 GHz
• Number of Ports: 1
• Center Contact Plating: Gold
• Dielectric Material: PTFE or compatible RF dielectric

Substitute Parts Identified:

1. Molex 0733660300 (Direct Manufacturer Equivalent): Active product status with identical MCX plug configuration, 50-ohm impedance, crimp termination, and 6 GHz frequency capability. Compatible with RG-174, 188, and 316 cable groups.

2. Huber+Suhner 11_MCX-50-2-15/133_NH (Parametric Equivalent): Active product status with matching MCX plug configuration, 50-ohm impedance, crimp termination, and 6 GHz frequency capability. Specified for RD-316 cable group.

Both substitutes maintain the core electrical and mechanical parameters required for functional interchangeability in 50-ohm RF coaxial connector applications.

Parameter Comparison

Engineering Selection Recommendations

Molex 0733660300 is the primary substitute for the TE Connectivity AMP 1060875-1. This part maintains identical electrical specifications (50-ohm impedance, 6 GHz frequency capability, 335 V voltage rating) and mechanical configuration (MCX plug, crimp termination, snap-on fastening). The Molex part carries active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment. Operating temperature range is reduced to -55°C ~ 155°C compared to the original -65°C ~ 165°C specification.

Huber+Suhner 11_MCX-50-2-15/133_NH serves as a parametric equivalent with matching MCX plug configuration, 50-ohm impedance, and 6 GHz frequency capability. This part maintains active product status. The voltage rating is reduced to 170 V, and the operating temperature range is -55°C ~ 155°C. The dielectric material specification includes both PFA and PTFE options.

Selection between these substitutes depends on application voltage requirements and operating temperature constraints. For applications requiring the full 335 V rating or extended temperature range to -65°C, the Molex 0733660300 is the appropriate choice. For standard RF applications within the reduced specifications, either substitute is suitable.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0733660300 directly replace the TE Connectivity AMP 1060875-1?

A: Yes. Both connectors share identical MCX plug configuration, 50-ohm impedance, crimp termination for center contact and shield, snap-on fastening, and 6 GHz frequency capability. The Molex part is compatible with RG-174, 188, and 316 cable groups. Operating temperature range is reduced from -65°C ~ 165°C to -55°C ~ 155°C, and voltage rating remains at 335 V.

Q: What are the differences between the Molex and Huber+Suhner substitutes?

A: Both substitutes maintain the core MCX plug configuration and 50-ohm impedance. The Molex 0733660300 retains the full 335 V voltage rating, while the Huber+Suhner 11_MCX-50-2-15/133_NH is rated for 170 V. Operating temperature ranges are identical at -55°C ~ 155°C for both. The Huber+Suhner part specifies dielectric material as PFA and PTFE, while the Molex part specifies PTFE only.

Q: Are there packaging differences between these parts?

A: The TE Connectivity AMP 1060875-1 packaging is not specified in available documentation. Both substitute parts are supplied in bulk packaging. The TE Connectivity part includes 3 pieces (1 connector, 1 contact, 1 ferrule), while the Huber+Suhner part does not specify included components.

Q: Which substitute should be selected for high-voltage applications?

A: The Molex 0733660300 maintains the 335 V voltage rating of the original TE Connectivity part and is the appropriate choice for applications requiring this specification. The Huber+Suhner part is rated for 170 V and is not suitable for high-voltage applications.

Q: Are both substitutes RoHS compliant?

A: The Molex 0733660300 carries ROHS3 compliance. RoHS status for the Huber+Suhner 11_MCX-50-2-15/133_NH is not specified in available documentation. Both parts carry REACH Unaffected or REACH Affected status as applicable.

Q: What is the maximum frequency capability of these connectors?

A: All three connectors (original and both substitutes) are rated for 6 GHz maximum frequency operation, making them suitable for RF coaxial applications within this frequency range.

Q: Are insertion loss specifications available for all parts?

A: The TE Connectivity AMP 1060875-1 specifies 0.1 dB insertion loss. Insertion loss specifications are not provided for the Molex 0733660300 or Huber+Suhner 11_MCX-50-2-15/133_NH in available documentation.