TE Connectivity AMP Connectors 106014-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 106014-9 is a 125-position header connector with male pins, designed for backplane applications. This connector features a 2.00mm pitch, press-fit termination, and board edge through-hole mounting in a right-angle configuration. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

106014-9

TE Connectivity AMP ConnectorsIn Stock: 1036106014-9 Datasheet

Current PartRFQ

HM2J08PE5110N9LF

Amphenol ICC (FCI)In Stock: 1211HM2J08PE5110N9LF Datasheet

SimilarRFQ

HM2J08PE5118N9LF

Amphenol ICC (FCI)In Stock: 907HM2J08PE5118N9LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 106014-9 are identified based on strict electrical and mechanical parameter matching within the backplane connector category. The primary substitution criteria are:

Critical Matching Parameters:

• Connector type: Header with male pins
• Number of positions: 125 (primary) or 150 (extended ground configuration)
• Pitch: 0.079" (2.00mm)
• Mounting configuration: Board edge, through-hole, right-angle
• Termination method: Press-fit
• Current rating: 1.5 A minimum
• Voltage rating: 500Vrms minimum
• Operating temperature range: -55°C to 125°C
• Contact finish: Gold plating
• Compliance: RoHS compliant

The substitute parts listed maintain these core electrical and mechanical specifications, ensuring functional compatibility in backplane connector applications. Variations in voltage rating (750Vrms for substitutes) and position count (150 for extended ground) represent enhanced or alternative configurations within the same connector family.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: HM2J08PE5110N9LF

The Amphenol ICC HM2J08PE5110N9LF maintains identical electrical and mechanical specifications to the 106014-9, with the exception of an elevated voltage rating of 750Vrms compared to the 500Vrms specification of the original part. This higher voltage rating provides additional design margin without compromising any other functional parameters. Both parts are RoHS compliant, carry unlimited moisture sensitivity rating, and are active in production status. The HM2J08PE5110N9LF is suitable for direct substitution in applications where the 500Vrms minimum requirement is met.

Secondary Substitute: HM2J08PE5118N9LF

The Amphenol ICC HM2J08PE5118N9LF provides an extended configuration with 150 total positions (125 signal + 25 dedicated ground positions) across 6 rows instead of 5. This part maintains all core electrical specifications including 1.5 A current rating, 750Vrms voltage rating, and identical pitch and termination method. The additional ground row configuration is applicable in designs requiring enhanced grounding architecture. This part is suitable for substitution only when the extended ground position count and 6-row configuration are compatible with the target application.

Both substitute parts are manufactured by Amphenol ICC (FCI), carry active product status, and maintain full RoHS compliance and unlimited moisture sensitivity rating consistent with the original 106014-9 specification.

Frequently Asked Questions (FAQ)

Q: Can HM2J08PE5110N9LF be used as a direct replacement for 106014-9?

A: Yes. The HM2J08PE5110N9LF maintains identical position count (125), pitch (2.00mm), mounting configuration (board edge, through-hole, right-angle), termination method (press-fit), current rating (1.5 A), and operating temperature range (-55°C to 125°C). The higher voltage rating (750Vrms versus 500Vrms) does not prevent substitution in applications designed for 500Vrms operation.

Q: What is the difference between HM2J08PE5110N9LF and HM2J08PE5118N9LF?

A: The primary difference is position count and row configuration. HM2J08PE5110N9LF provides 125 positions across 5 rows, matching the 106014-9 configuration. HM2J08PE5118N9LF provides 150 positions (125 signal + 25 ground) across 6 rows. Both maintain identical pitch, termination, current rating, and voltage rating specifications.

Q: Are all three parts RoHS compliant?

A: Yes. The 106014-9, HM2J08PE5110N9LF, and HM2J08PE5118N9LF are all RoHS compliant with unlimited moisture sensitivity rating (MSL 1).

Q: What is the significance of the higher 750Vrms rating on the Amphenol ICC substitutes?

A: The 750Vrms rating on HM2J08PE5110N9LF and HM2J08PE5118N9LF represents a higher voltage specification than the 500Vrms rating of the 106014-9. This does not prevent substitution in applications designed for 500Vrms operation, as the substitute parts exceed the minimum voltage requirement.

Q: Can HM2J08PE5118N9LF be used in place of 106014-9 if the application does not require the additional ground positions?

A: HM2J08PE5118N9LF can be used only if the physical footprint and row configuration (6 rows versus 5 rows) are compatible with the target application. The additional ground row and 25 additional positions represent a different physical layout that must be verified for mechanical fit and electrical routing compatibility.

Q: What packaging format is used for all three parts?

A: All three parts are supplied in tray packaging format.

Q: Are there any temperature or environmental limitations that differ between these parts?

A: No. All three parts operate across the identical temperature range of -55°C to 125°C and carry unlimited moisture sensitivity rating (MSL 1).