Equivalent & Substitute Parts for LAPP 105670

Part Overview

The LAPP 105670 is a heavy duty connector accessory categorized as a base - box mount connector, side entry, with PG21 thread size and HA16 size designation. It features IP65 ingress protection, dust tight and water resistant capability, and is constructed from powder coated aluminum alloy. The product is currently classified as obsolete, making it necessary to identify alternative active models that adhere strictly to the listed parameters for ongoing maintenance, repair, and system upgrades.

Substiute Parts

105670

LAPPIn Stock: 928105670 Datasheet

Current PartRFQ

10567000

LAPPIn Stock: 76910567000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification is governed by strict matching of core electrical and mechanical parameters. These key parameters include: Manufacturer (LAPP), Category (Heavy Duty Connectors), Series (EPIC® H-A), Connector Type (Base - Box Mount), Style (Side Entry), Size (HA16), Lock Location (Locking Clip (1) on Base Bottom), Thread Size (PG21), Size / Dimension, Housing Material (Aluminum Alloy), Housing Finish (Powder Coated), Housing Color (Gray), Ingress Protection (IP65), and Operating Temperature range. Only substitute parts which fully align with these criteria are considered suitable.

Parameter Comparison

Engineering Selection Recommendations

Replacement part selection must consider only confirmed product status and conformance with electrical and mechanical parameters as listed. The original LAPP 105670 is obsolete; the substitute LAPP 10567000 maintains active product status and matches all critical attributes except for a slightly reduced maximum operating temperature (-40°C ~ 100°C instead of -40°C ~ 125°C). Users requiring full parameter equivalency should assess application operating temperature to confirm suitability within the defined substitute range. Ingress Protection (IP65), material, and mechanical form factors are fully retained between both items.

Frequently Asked Questions (FAQ)

Q: What parameters must match for direct substitution of heavy duty connector base accessories?
A: Manufacturer, series, connector type, style, size, lock location, thread size, housing material, housing finish, housing color, ingress protection, size / dimension, packaging, and operating temperature must align.

Q: Are there any differences between LAPP 105670 and 10567000 that affect compatibility?
A: The only difference is the maximum operating temperature (-40°C ~ 125°C for 105670 versus -40°C ~ 100°C for 10567000). All other parameters are identical.

Q: Is certification or compliance affected by choosing the substitute part?
A: Compliance with mechanical, environmental, and ingress protection requirements is maintained. Selection should reflect any operating temperature needs based strictly on the provided ranges.

Q: Are packaging options or inventory considered substitution criteria?
A: Packaging and inventory are not primary substitution criteria unless specified; both parts list identical packaging information.

Q: Can the substitute LAPP 10567000 be used in the same mechanical interface and mounting as LAPP 105670?
A: Yes, all mechanical parameters including connector type, style, size, lock location, thread size, and dimensions are matched precisely according to provided data. Compatibility for interface and mounting is retained.