TE Connectivity AMP Connectors 1052092-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1052092-1 is an SMA connector plug with male pin configuration, 50 ohm impedance, and right angle free hanging (in-line) mounting. The connector features solder contact termination and crimp shield termination, designed for use with RG-58, RG-141, and RG-303 cable groups. This part is classified as obsolete, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility while offering active product status and current availability.

Substiute Parts

1052092-1

TE Connectivity AMP ConnectorsIn Stock: 9681052092-1 Datasheet

Current PartRFQ

2910-6001

Amphenol SV MicrowaveIn Stock: 10222910-6001 Datasheet

DirectRFQ

142-0407-101

Cinch Connectivity SolutionsIn Stock: 1026142-0407-101 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1052092-1 is determined by the following core parameters: SMA connector style, male pin plug type, 50 ohm impedance, right angle free hanging mounting orientation, threaded fastening, single port configuration, gold-finished stainless steel body, PTFE dielectric material, and 500 mating cycle rating.

The substitute parts are grouped into two categories based on contact termination method:

Direct Substitute (Crimp Termination): Amphenol SV Microwave 2910-6001 maintains all core mechanical and electrical parameters but employs crimp contact termination instead of solder. This part is compatible with RG-55, RG-142, RG-223, and RG-400 cable groups and operates at frequencies up to 12.4 GHz.

Similar Substitute (Solder Termination): Cinch Connectivity Solutions 142-0407-101 maintains solder contact termination matching the original part and is compatible with the same cable groups (RG-58, RG-141, RG-303). This part features an extended operating temperature range of -65°C ~ 165°C and operates at frequencies up to 12.4 GHz.

Parameter Comparison

Engineering Selection Recommendations

For Solder Termination Applications:

The Cinch Connectivity Solutions 142-0407-101 is the primary equivalent substitute for the TE Connectivity 1052092-1. Both connectors employ solder contact termination and are compatible with RG-58, RG-141, and RG-303 cable groups. The 142-0407-101 maintains the same 50 ohm impedance, threaded fastening, and 500 mating cycle rating. The part offers active product status with ROHS3 compliance and extended operating temperature range (-65°C ~ 165°C). The 142-0407-101 differs in body material composition (brass versus stainless steel) and center contact material (brass versus beryllium copper), but maintains equivalent electrical performance for the specified cable groups.

For Crimp Termination Applications:

The Amphenol SV Microwave 2910-6001 provides an alternative when crimp contact termination is acceptable. This connector maintains 50 ohm impedance, right angle free hanging mounting, threaded fastening, and 500 mating cycle rating. The 2910-6001 is compatible with RG-55, RG-142, RG-223, and RG-400 cable groups and operates at frequencies up to 12.4 GHz. The part offers active product status with ROHS3 compliance and REACH unaffected status. The primary distinction is the crimp contact termination method, which differs from the original solder termination.

Compliance Considerations:

Both substitute parts maintain RoHS compliance (ROHS3 standard). The 142-0407-101 retains REACH affected status matching the original part. The 2910-6001 offers REACH unaffected status, which may provide regulatory advantages in certain applications.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol SV Microwave 2910-6001 be used as a direct replacement for the TE Connectivity 1052092-1?

A: The 2910-6001 is mechanically and electrically compatible in terms of connector style, impedance, mounting type, and fastening. However, the contact termination differs: the 2910-6001 uses crimp termination while the original uses solder termination. Selection depends on assembly process requirements and cable group compatibility.

Q: What is the primary difference between the two substitute parts?

A: The Cinch Connectivity Solutions 142-0407-101 maintains solder contact termination matching the original part and is compatible with the same cable groups (RG-58, RG-141, RG-303). The Amphenol SV Microwave 2910-6001 employs crimp contact termination and is compatible with different cable groups (RG-55, RG-142, RG-223, RG-400).

Q: Are the substitute parts compatible with the same cable groups as the original?

A: The Cinch Connectivity Solutions 142-0407-101 is compatible with the same cable groups as the original (RG-58, RG-141, RG-303). The Amphenol SV Microwave 2910-6001 is compatible with different cable groups (RG-55, RG-142, RG-223, RG-400). Cable group selection must align with the specific connector chosen.

Q: What are the packaging differences between the substitute parts?

A: The TE Connectivity 1052092-1 is supplied without specified packaging. The Amphenol SV Microwave 2910-6001 is packaged in trays. The Cinch Connectivity Solutions 142-0407-101 is packaged in bulk. Packaging selection may affect inventory management and handling procedures.

Q: Do the substitute parts meet the same compliance standards as the original?

A: Both substitute parts are ROHS3 compliant, exceeding the original RoHS compliance level. The 142-0407-101 maintains REACH affected status matching the original. The 2910-6001 offers REACH unaffected status. Both parts carry EAR99 ECCN classification matching the original.

Q: What is the operating temperature range for each substitute part?

A: The original TE Connectivity 1052092-1 operates from -65°C to 125°C. The Cinch Connectivity Solutions 142-0407-101 extends this range to -65°C to 165°C. The Amphenol SV Microwave 2910-6001 does not specify an operating temperature range in the provided data.

Q: Are there differences in center contact material between the parts?

A: The original TE Connectivity 1052092-1 uses beryllium copper for the center contact. Both substitute parts use brass for the center contact material. All three parts feature gold plating on the center contact. Material differences do not affect electrical performance for the specified applications.

Q: What is the frequency rating for the substitute parts?

A: The original TE Connectivity 1052092-1 does not specify a maximum frequency rating. Both substitute parts operate at frequencies up to 12.4 GHz, providing extended frequency capability compared to the original specification.