LAPP 10512700 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The LAPP 10512700 is an EPIC® H-A series hood-coupling connector accessory designed for cable-to-cable applications with bottom entry configuration. This component provides IP65 ingress protection (dust tight, water resistant) and operates across -40°C to 100°C. The part is currently active in production with 697 units in stock. Alternative components may be required due to application-specific entry orientation, panel mounting requirements, or enhanced temperature operating ranges.

Substiute Parts

10512700

LAPPIn Stock: 80010512700 Datasheet

Current PartRFQ

09200031250

HARTINGIn Stock: 88109200031250 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LAPP 10512700 is determined by the following critical parameters:

Connector Category & Series Compatibility: Both the main part and substitute must function within the heavy duty connector classification. The LAPP EPIC® H-A series and HARTING Han® A series are distinct product families with different mechanical interfaces.

Size Designation: The main part operates at size A3 with HA3 thread specification. The substitute part (HARTING 09200031250) operates at size 3A with PG11 thread specification. These represent different mechanical mounting standards and are not directly interchangeable without adapter considerations.

Entry Configuration & Connector Type: The LAPP 10512700 provides bottom entry hood-coupling functionality for cable-to-cable connections. The HARTING 09200031250 is a base panel mount 90° connector with side entry configuration, serving a different application topology.

Ingress Protection Rating: The main part provides IP65 protection. The substitute provides IP44 protection, representing a lower ingress protection classification.

Operating Temperature: The main part operates -40°C to 100°C. The substitute operates -40°C to 125°C, providing extended high-temperature capability.

Housing Material & Finish: Both components utilize zinc die cast housing with powder coating, meeting corrosion resistance requirements for industrial applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Application Match: The LAPP 10512700 is the specified component for cable-to-cable bottom entry hood-coupling applications requiring IP65 protection within the -40°C to 100°C operating window.

Substitute Applicability: The HARTING 09200031250 serves fundamentally different application requirements as a panel-mount base connector with side entry configuration. This component is not a direct functional equivalent due to connector type, entry orientation, and mounting methodology differences.

Compliance & Certification: Both components carry EAR99 ECCN classification and share HTSUS code 8538.90.8180. The HARTING substitute provides additional RoHS3 compliance certification and REACH unaffected status documentation. Both operate under identical ECCN export control parameters.

Temperature Consideration: Applications requiring sustained operation above 100°C may benefit from the HARTING component's extended -40°C to 125°C range, provided connector type and entry configuration modifications are acceptable.

Ingress Protection Trade-off: Substitution to the HARTING component reduces ingress protection from IP65 to IP44. Applications in dust-intensive or high-pressure wash environments require IP65 rating retention.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09200031250 directly replace the LAPP 10512700 in existing installations?

A: No. The HARTING component operates as a panel-mount base connector with side entry, while the LAPP component functions as a cable-to-cable hood-coupling with bottom entry. These represent different connector topologies and mounting methodologies. Direct substitution requires system redesign.

Q: What are the key differences preventing direct substitution?

A: Four critical parameters differ: (1) Connector type (hood-coupling vs. panel-mount base), (2) Entry configuration (bottom vs. side), (3) Thread specification (HA3 vs. PG11), and (4) Ingress protection rating (IP65 vs. IP44). These parameters define fundamentally different application classes.

Q: Are both components suitable for outdoor industrial environments?

A: The LAPP 10512700 provides IP65 dust-tight, water-resistant protection suitable for outdoor exposure. The HARTING 09200031250 provides IP44 protection, which is adequate for splash and light spray but not dust-tight conditions. Environmental exposure requirements determine component selection.

Q: What is the operating temperature advantage of the HARTING component?

A: The HARTING 09200031250 operates to 125°C maximum, compared to 100°C for the LAPP component. This 25°C extended range applies only if connector type and entry configuration modifications are acceptable for the application.

Q: Are both components manufactured from equivalent materials?

A: Yes. Both utilize zinc die cast housing with powder coating finish, providing equivalent corrosion resistance and mechanical durability for industrial applications.

Q: What inventory considerations apply to these components?

A: The LAPP 10512700 has 697 units in stock. The HARTING 09200031250 has 824 units in stock. Both are active production components with established supply availability.