LED Module Red Linear Strip 104990029 Equivalent & Substitute Parts

Part Overview

The Seeed Technology Co., Ltd model 104990029 is a red linear LED light strip module designed for flexible lighting applications. This product is classified as Obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations. The module operates at 12V with a maximum current of 1.2A and features a flexible linear configuration suitable for decorative and functional lighting installations.

Due to its obsolete status, sourcing equivalent parts with matching electrical and mechanical specifications is necessary to maintain system compatibility and ensure continued availability for replacement or redesign purposes.

Substiute Parts

104990029

Seeed Technology Co., LtdIn Stock: 1161104990029 Datasheet

Current PartRFQ

12V-SB-RED-12M

Inspired LED, LLCIn Stock: 212612V-SB-RED-12M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 104990029 are identified based on strict alignment with the following critical parameters:

Mandatory Matching Criteria:

• Voltage (Vf): 12V nominal forward voltage
• Color: Red wavelength output
• Configuration: Linear light strip with flexible construction
• Lens Type: Flat optical surface
• Regulatory Compliance: RoHS compliant status

Allowable Variation Parameters:

• Current rating may differ if substitute operates within system power budget
• Physical dimensions may vary within installation envelope constraints
• Height tolerance acceptable if mechanical clearance permits
• Wavelength specification (625nm) provides additional optical precision when available

The substitute part 12V-SB-RED-12M from Inspired LED, LLC meets all mandatory matching criteria and is classified as Active product status, ensuring ongoing availability and supply chain reliability.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 12V-SB-RED-12M

The Inspired LED model 12V-SB-RED-12M is the qualified substitute for the obsolete Seeed 104990029 based on the following engineering criteria:

Electrical Compatibility: Both components operate at 12V nominal forward voltage, ensuring direct compatibility with existing power supply infrastructure and control circuitry. No voltage regulation modifications are required.

Optical Compatibility: Red color specification is identical. The substitute provides a defined wavelength of 625nm with a 120° viewing angle, offering enhanced optical performance documentation compared to the original part.

Mechanical Compatibility: Both components feature linear flexible light strip configuration with flat lens type. The substitute height of 1.50mm is 0.5mm lower than the original 2.00mm specification, which is acceptable for most installation envelopes. Verify clearance in space-constrained applications.

Regulatory Compliance: The substitute meets ROHS3 compliance, exceeding the original RoHS requirement. Both components share identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications, ensuring consistent export and import compliance.

Product Status: The substitute is classified as Active product status with 2111 units in stock, providing reliable long-term availability compared to the obsolete original component.

Supply Chain Consideration: Packaging format differs (Cut Tape on 12M reel for substitute versus unspecified for original). Verify reel compatibility with assembly equipment if automated placement is required.

Frequently Asked Questions (FAQ)

Q: Can the 12V-SB-RED-12M directly replace the 104990029 in existing installations?

A: Yes, for applications where the 1.50mm height of the substitute fits within the mechanical envelope. Both components operate at identical 12V forward voltage and share red color specification with flat lens configuration. Verify physical clearance before installation.

Q: What is the significance of the 625nm wavelength specification on the substitute?

A: The 625nm wavelength is the specific red color output of the substitute component. The original part does not specify wavelength, but 625nm is a standard red LED wavelength. This specification provides additional optical precision for color-critical applications.

Q: Does the 120° viewing angle of the substitute affect compatibility?

A: The viewing angle specification indicates the angular range over which the LED output is visible. The substitute's 120° viewing angle is a performance characteristic that may differ from the original part. For applications requiring specific light distribution patterns, this parameter should be evaluated against system requirements.

Q: Why is the substitute current rating not specified?

A: The substitute datasheet does not provide maximum current specification. The original part specifies 1.2A maximum current. For system design, use the original 1.2A specification as the design limit unless the substitute manufacturer provides alternative documentation.

Q: Are there packaging differences between the original and substitute?

A: Yes. The substitute is supplied in Cut Tape (CT) format on a 12-meter reel, while the original packaging is not specified. Verify compatibility with your assembly process and equipment before ordering.

Q: What compliance certifications apply to the substitute?

A: The substitute meets ROHS3 compliance, which exceeds the original RoHS requirement. Both components share EAR99 ECCN classification and 8541.41.0000 HTSUS code, ensuring consistent regulatory treatment.

Q: Is the 0.5mm height difference critical for my application?

A: The substitute is 0.5mm lower (1.50mm vs. 2.00mm). This is acceptable for most applications but must be verified in space-constrained installations, such as thin-profile lighting fixtures or applications with tight vertical clearance requirements.