LAPP 10462000 Equivalent & Substitute Parts

Part Overview

The LAPP 10462000 is an EPIC® H-A series base connector designed for panel mount applications with bottom entry configuration. This HA16 connector provides IP65 ingress protection (dust tight, water resistant) and operates across an industrial temperature range of -40°C to 100°C. The connector features aluminum alloy housing with powder coating and a single locking clip positioned on the base bottom for secure panel mounting.

This part is currently active in production with 718 units in stock. Equivalent substitute parts may be required due to supply chain considerations, regional availability, or specific application requirements where alternative manufacturers' connectors meet identical electrical and mechanical specifications.

Substiute Parts

10462000

LAPPIn Stock: 74110462000 Datasheet

Current PartRFQ

09200160301

HARTINGIn Stock: 115209200160301 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10462000 is determined by strict alignment of the following critical parameters:

• Connector Type & Style: Must be base panel mount connector with bottom entry configuration
• Size Classification: HA16 equivalent size designation (16A in alternative manufacturer nomenclature)
• Ingress Protection: IP65 rating mandatory for dust and water resistance equivalence
• Housing Material & Finish: Aluminum construction with powder coating for environmental durability
• Operating Temperature: Minimum -40°C to 100°C range to ensure thermal compatibility
• Mechanical Interface: Single locking clip on base bottom for consistent panel mounting

The HARTING 09200160301 (Han® A series, 16A size) meets all specified parameters and qualifies as a direct substitute based on matching electrical protection class, mechanical mounting interface, environmental sealing, and thermal operating range.

Parameter Comparison

Engineering Selection Recommendations

The HARTING 09200160301 qualifies as a direct substitute for the LAPP 10462000 based on matching functional specifications across all critical parameters. Both connectors are active production parts with established supply availability (1119 units in stock for the HARTING alternative).

The HARTING substitute provides extended operating temperature capability (-40°C to 125°C versus -40°C to 100°C), which represents a performance advantage for applications requiring thermal margin. Dimensional variance is minimal (1mm height difference, 0.5mm width difference) and does not impact panel mounting compatibility.

The HARTING 09200160301 carries ROHS3 compliance, REACH unaffected status, and EAR99 export classification, meeting standard industrial regulatory requirements. MSL rating of 1 (unlimited) indicates no moisture sensitivity constraints for storage or handling.

Frequently Asked Questions (FAQ)

Q: What determines if a connector can substitute for the LAPP 10462000?

A: Substitution requires matching connector type (base panel mount), entry style (bottom entry), size designation (HA16/16A equivalent), ingress protection rating (IP65), housing material (aluminum), finish (powder coated), lock mechanism (single clip on base), and operating temperature range (-40°C minimum to 100°C minimum).

Q: Are the dimensional differences between LAPP and HARTING models significant?

A: No. The HARTING 09200160301 dimensions (96.00mm L × 29.00mm W × 26.00mm H) differ from the LAPP 10462000 (96.00mm L × 29.50mm W × 25.00mm H) by only 0.5mm in width and 1mm in height. These tolerances are within acceptable mechanical compatibility for panel mounting applications.

Q: Does the HARTING substitute offer any performance advantages?

A: Yes. The HARTING 09200160301 extends the operating temperature range to -40°C to 125°C, providing 25°C additional thermal margin above the LAPP specification. All other functional parameters remain equivalent.

Q: What compliance certifications apply to the HARTING substitute?

A: The HARTING 09200160301 is ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes. MSL rating of 1 indicates unlimited moisture sensitivity tolerance.

Q: Can these connectors be used interchangeably in existing installations?

A: Yes, provided the application does not depend on manufacturer-specific connector pin configurations or mating interface details not specified in this reference. Panel mounting geometry and environmental sealing characteristics are equivalent.