LAPP 10450100 Equivalent & Substitute Parts

Part Overview

The LAPP 10450100 is an active heavy duty connector base designed for box mount applications with side entry configuration. This component is part of the EPIC® H-A series and provides IP65 ingress protection suitable for dust-tight and water-resistant industrial environments. The part is currently in active product status with 656 units in stock.

Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part becomes unavailable or when alternative sourcing is required for project specifications.

Substiute Parts

10450100

LAPPIn Stock: 74810450100 Datasheet

Current PartRFQ

09200100291

HARTINGIn Stock: 109109200100291 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10450100 is determined by the following critical parameters:

Primary Substitution Criteria:

• Connector Type: Base - Box Mount (functional equivalence)
• Style: Side Entry (mechanical compatibility)
• Thread Size: PG16 (interface compatibility)
• Ingress Protection: IP65 minimum (environmental sealing requirement)
• Lock Location: Locking Clip (1) on Base Bottom (mechanical interface)

Secondary Compatibility Factors:

• Housing Material: Aluminum or Aluminum Alloy (structural equivalence)
• Housing Finish: Powder Coated (corrosion resistance equivalence)
• Operating Temperature Range: Must encompass or exceed -40°C ~ 100°C

The substitute part HARTING 09200100291 meets all primary substitution criteria and maintains functional and mechanical compatibility with the LAPP 10450100 within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 10450100 and HARTING 09200100291 are active products with confirmed availability. The HARTING 09200100291 provides an extended operating temperature range of -40°C ~ 125°C compared to the LAPP specification of -40°C ~ 100°C, offering additional thermal margin for applications requiring higher temperature tolerance.

The HARTING 09200100291 carries ROHS3 compliance and REACH unaffected status, supporting regulatory requirements for restricted substance management. Both parts maintain identical mechanical interfaces (PG16 thread, side entry configuration, locking clip placement) and equivalent environmental sealing (IP65).

Selection between these parts should be based on supply availability, project-specific temperature requirements, and regulatory compliance documentation needs.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09200100291 directly replace LAPP 10450100 in existing installations?

A: Yes. Both parts share identical connector type (Base - Box Mount), style (Side Entry), thread size (PG16), lock location (Locking Clip on Base Bottom), and ingress protection rating (IP65). Mechanical and functional compatibility is confirmed across these critical parameters.

Q: What is the difference in size between these two parts?

A: The LAPP 10450100 measures 3.307" L x 1.969" W x 2.244" H (84.00mm x 50.00mm x 57.00mm). The HARTING 09200100291 measures 3.461" L x 1.969" W x 2.047" H (87.90mm x 50.00mm x 52.00mm). Width dimensions are identical; length and height differ slightly. Verify mounting space availability in your application.

Q: Does the extended temperature range of HARTING 09200100291 affect compatibility?

A: No. The HARTING part's operating range of -40°C ~ 125°C encompasses the LAPP specification of -40°C ~ 100°C. This represents an enhancement rather than a compatibility issue.

Q: Are there packaging differences between these parts?

A: The LAPP 10450100 is supplied with standard packaging. The HARTING 09200100291 is supplied in bulk packaging. Confirm packaging requirements for your procurement and logistics processes.

Q: What compliance certifications apply to the HARTING substitute?

A: The HARTING 09200100291 is ROHS3 compliant and REACH unaffected. Verify that these certifications align with your project regulatory requirements.