TE Connectivity 104362-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 104362-4 is a rectangular connector header designed for through-hole mounting applications. This shrouded 5-position connector operates at 0.100" (2.54mm) pitch and supports board-to-board or cable interconnections across automotive, medical, telecommunications, and general-purpose applications. The part is currently active in production with 843 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in system designs where pin pitch, contact configuration, and environmental ratings remain compatible.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	5
Number of Rows	1
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Shrouding	Shrouded - 4 Wall
Current Rating	3A
Voltage Rating	267V
Operating Temperature	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 104362-4 are classified based on alignment with critical electrical and mechanical parameters. The primary substitution criterion is connector pitch, which determines physical and electrical compatibility with mating connectors and PCB layouts.

Direct Equivalent (Same Pitch - 0.100" / 2.54mm): The part 5-104362-4 maintains identical pitch, position count, shrouding configuration, and electrical ratings. This part is a direct substitute with no design modifications required.

Similar Pitch Alternatives (0.098" / 2.50mm): Parts 0533750510 (Molex Mini-Lock 53375) and BH5B-XH-2 (JST XH Series) operate at 0.098" (2.50mm) pitch. These parts are classified as similar alternatives due to pitch variance of approximately 0.002" (0.04mm). While mechanically and electrically compatible in many applications, these alternatives require verification of mating connector availability and PCB layout accommodation before deployment.

Key Parameters Determining Substitution:

Pitch - Mating (0.100" vs. 0.098")
Number of Positions (5)
Connector Type (Header)
Contact Type (Male Pin)
Shrouding Configuration (Shrouded - 4 Wall)
Mounting Type (Through Hole)
Current and Voltage Ratings (3A, 250V minimum)
Operating Temperature Range
Material Flammability Rating (UL94 V-0)

Parameter Comparison

Parameter	104362-4 (TE)	5-104362-4 (TE)	0533750510 (Molex)	BH5B-XH-2 (JST)
Manufacturer	TE Connectivity AMP	TE Connectivity AMP	Molex	JST Sales America
Connector Type	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	5	5	5	5
Number of Rows	1	1	1	1
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.098" (2.50mm)	0.098" (2.50mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Contact Shape	Square	Square	Circular	Square
Contact Finish - Mating	Gold	Gold	Tin	Tin
Contact Material	Brass	Brass	Phosphor Bronze	Copper Alloy
Insulation Material	Thermoplastic	Thermoplastic	Polybutylene Terephthalate (PBTP), Glass Filled	Polyamide (PA66), Nylon 6/6, Glass Filled
Current Rating	3A	3A	Varies by Wire Gauge	3A (AC/DC)
Voltage Rating	267V	267V	250V	250VAC/DC
Operating Temperature	-65°C ~ 105°C	-65°C ~ 105°C	-40°C ~ 105°C	-25°C ~ 85°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active
RoHS Status	Not applicable	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Selection: 5-104362-4 (TE Connectivity)

The part 5-104362-4 is the direct equivalent to 104362-4. Both parts maintain identical electrical specifications, pitch, position count, and mechanical configuration. The 5-104362-4 variant is RoHS Compliant, whereas the original 104362-4 is marked as not applicable for RoHS status. The 5-104362-4 offers higher inventory availability (2100 pieces versus 843 pieces) and is recommended as the primary substitute when component sourcing requires RoHS compliance or increased stock availability.

Secondary Selection: 0533750510 (Molex Mini-Lock 53375) or BH5B-XH-2 (JST XH Series)

These alternatives operate at 0.098" (2.50mm) pitch, representing a 0.002" (0.04mm) deviation from the original 0.100" (2.54mm) specification. Both parts are ROHS3 Compliant and maintain UL94 V-0 flammability ratings. The Molex part supports general-purpose and industrial applications with extended low-temperature operation (-40°C minimum). The JST part operates within a narrower temperature range (-25°C ~ 85°C) and is suitable for applications where temperature extremes are not critical. Selection between these alternatives depends on mating connector ecosystem availability and PCB layout constraints specific to the 0.098" pitch standard.

Compliance Considerations:

All substitute parts carry active product status and UL94 V-0 material flammability certification. The 5-104362-4 and alternative parts (0533750510, BH5B-XH-2) are RoHS3 Compliant, supporting regulatory requirements in automotive, medical, and telecommunications sectors. Moisture sensitivity level remains constant across all options at MSL 1 (Unlimited), indicating no special handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can 5-104362-4 be used as a direct replacement for 104362-4?

A: Yes. The 5-104362-4 is a direct equivalent with identical pitch (0.100" / 2.54mm), position count (5), shrouding configuration, and electrical ratings (3A, 267V). Both parts are shrouded 4-wall headers with through-hole mounting. The primary difference is RoHS compliance status and inventory availability.

Q: What is the pitch difference between 104362-4 and the Molex/JST alternatives?

A: The original TE Connectivity part operates at 0.100" (2.54mm) pitch. The Molex 0533750510 and JST BH5B-XH-2 operate at 0.098" (2.50mm) pitch, a difference of 0.002" (0.04mm). This variance requires verification that mating connectors and PCB layouts accommodate the alternative pitch standard.

Q: Are the Molex and JST parts electrically equivalent to the TE part?

A: Both alternatives meet or exceed the electrical requirements of the original part. The Molex part supports 250V (versus 267V original) with current rating varying by wire gauge. The JST part supports 250VAC/DC at 3A. All three parts maintain UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating.

Q: What are the temperature operating range differences?

A: The original 104362-4 operates from -65°C to 105°C. The TE 5-104362-4 maintains this range. The Molex alternative operates from -40°C to 105°C, and the JST alternative operates from -25°C to 85°C. Selection depends on application temperature requirements.

Q: Which substitute part has the best inventory availability?

A: The Molex 0533750510 offers the highest inventory with 53,300 pieces in stock, followed by the TE 5-104362-4 with 2,100 pieces, and the JST BH5B-XH-2 with 1,247 pieces. The original 104362-4 has 843 pieces available.

Q: Do all substitute parts use the same packaging?

A: No. The original 104362-4 and TE 5-104362-4 are packaged in tubes. The Molex 0533750510 is packaged in bags, and the JST BH5B-XH-2 is packaged in bulk. Packaging differences may affect handling, storage, and assembly processes.

Q: What contact material differences exist between the parts?

A: The original TE part uses brass contacts with gold mating finish. The TE 5-104362-4 maintains brass contacts with gold finish. The Molex part uses phosphor bronze contacts with tin finish. The JST part uses copper alloy contacts with tin finish. Contact material selection affects electrical conductivity and corrosion resistance characteristics.

Q: Are all parts suitable for automotive applications?

A: The original 104362-4 and TE 5-104362-4 explicitly list automotive applications. The Molex part lists general-purpose and industrial applications. The JST part does not specify applications in the provided data. Automotive-specific requirements should be verified before selecting alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message