Molex 1041880210 Solid State Lighting Connector - Equivalent & Substitute Parts

Part Overview

The Molex 1041880210 is a 2-position SSL receptacle connector designed for board-to-cable/wire applications with 0.157" (4.00mm) pitch spacing. This surface mount, right-angle connector features solder termination and supports wire gauges from 18-24 AWG. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement continuity.

Substiute Parts

1041880210

MolexIn Stock: 16471041880210 Datasheet

Current PartRFQ

2060-452/998-404

WAGO CorporationIn Stock: 318362060-452/998-404 Datasheet

DirectRFQ

695402400222

Würth ElektronikIn Stock: 837695402400222 Datasheet

MFR RecommendedRFQ

7-2834006-2

TE Connectivity AMP ConnectorsIn Stock: 116567-2834006-2 Datasheet

MFR RecommendedRFQ

SMDFLAT 345/ 2 WS

Adels-ContactIn Stock: 73786SMDFLAT 345/ 2 WS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 1041880210 is determined by the following critical parameters:

• Connector Configuration: 2-position receptacle with poke-in wire termination
• Pitch Spacing: 0.157" (4.00mm) center-to-center distance
• Mounting Style: Surface mount, right-angle orientation
• Termination Method: Solder connection
• Wire Gauge Compatibility: 18-24 AWG support
• Electrical Performance: Minimum voltage rating of 300V and current rating supporting at least 5A
• Environmental Compliance: ROHS3 compliance and operating temperature range compatibility

The substitute parts listed below meet these core substitution criteria. However, variations exist in housing material, contact finish specifications, and maximum operating temperature ranges that must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

WAGO 2060-452/998-404: This part shares the 2-position, 4.00mm pitch configuration and surface mount orientation. However, the termination method differs fundamentally—it uses screwless push-button clamp termination rather than solder. This represents a different connector family (terminal blocks) and requires PCB design modification. Maximum operating temperature is limited to 105°C, below the original part's 130°C rating. This substitute is suitable only for applications where termination method change is acceptable and operating temperature does not exceed 105°C.

Würth Elektronik 695402400222: This SSL connector maintains identical pitch, position count, mounting style, and solder termination. It is directly compatible from a mechanical and electrical standpoint. The voltage rating of 250V is lower than the original 300V specification. Operating temperature maximum is 105°C versus the original 130°C. This part is classified as obsolete, matching the original part's status. Selection is appropriate for applications operating within the reduced voltage and temperature specifications.

TE Connectivity 7-2834006-2: This SSL connector matches the core configuration with 2 positions, 4.00mm pitch, surface mount right-angle orientation, and solder termination. Wire gauge support is limited to 18-22 AWG, excluding the 24 AWG option available in the original part. Current rating is limited to 5A and 6A, excluding the 9A option. Voltage rating of 400V exceeds the original specification. Operating temperature range of -40°C to 125°C is compatible with the original part's requirements. This part is active status, providing long-term availability. Selection is appropriate for applications requiring wire gauges within the 18-22 AWG range and current levels not exceeding 6A.

Adels-Contact SMDFLAT 345/2 WS: This SSL connector provides the 2-position, 4.00mm pitch configuration with surface mount right-angle mounting and solder termination. Wire gauge support of 18-24 AWG matches the original part. Current rating of 6A is within the original part's range. Voltage rating of 320V exceeds the original 300V specification. Operating temperature range extends to 150°C, exceeding the original part's 130°C maximum. Housing material is PPA glass-filled rather than LCP. Contact finish is not specified. This part is active status. Selection is appropriate for applications requiring extended operating temperature capability and standard wire gauge support.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2060-452/998-404 be used as a direct replacement?

A: No. While it maintains the 2-position, 4.00mm pitch configuration, the termination method is fundamentally different. The WAGO part uses screwless push-button clamp termination for wire-to-board connection, whereas the Molex part uses solder termination. This requires PCB design modification and is not a direct mechanical or electrical substitute.

Q: Which substitute part has the highest operating temperature rating?

A: The Adels-Contact SMDFLAT 345/2 WS supports operating temperatures up to 150°C, exceeding the original Molex part's 130°C maximum. This makes it suitable for high-temperature applications where the original part's thermal limits are insufficient.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification, matching the original Molex 1041880210 specification.

Q: What is the key difference between the Würth Elektronik and TE Connectivity substitutes?

A: The Würth Elektronik 695402400222 supports wire gauges of 18-24 AWG and current ratings up to 9A, matching the original part's full range. The TE Connectivity 7-2834006-2 limits wire gauge to 18-22 AWG and current to 5A or 6A. The Würth part is more functionally equivalent but is also classified as obsolete. The TE part offers active product status and long-term availability.

Q: Can the TE Connectivity 7-2834006-2 accommodate 24 AWG wire?

A: No. The TE Connectivity part specifies 18-22 AWG wire gauge support only. Applications requiring 24 AWG wire compatibility must select the Würth Elektronik 695402400222 or Adels-Contact SMDFLAT 345/2 WS.

Q: What is the voltage rating difference between the original part and substitutes?

A: The Molex original part is rated at 300V. The WAGO part is rated at 320V, the Würth part at 250V, the TE part at 400V, and the Adels-Contact part at 320V. Applications operating at or near 300V should avoid the Würth part, which has a lower 250V rating.

Q: Which substitute offers the best long-term availability?

A: Both the TE Connectivity 7-2834006-2 and Adels-Contact SMDFLAT 345/2 WS are classified as active products, indicating ongoing manufacturing and availability. The Würth Elektronik part is obsolete, similar to the original Molex part.