TE Connectivity 104071-8 Rectangular Connector Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity 104071-8 is a vertical rectangular connector header designed for through-hole mounting applications. This component is part of the AMPMODU System 50 series and features a 6-position, single-row configuration with 0.050" (1.27mm) pitch spacing. The connector is actively manufactured and widely used in automotive, general purpose, medical, and telecommunications applications. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

104071-8

TE Connectivity AMP ConnectorsIn Stock: 1200104071-8 Datasheet

Current PartRFQ

5-104071-8

TE Connectivity AMP ConnectorsIn Stock: 78575-104071-8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 104071-8 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 6
• Number of Rows: 1
• Pitch - Mating: 0.050" (1.27mm)
• Mounting Type: Through Hole
• Termination: Solder
• Shrouding: Shrouded - 2 Wall
• Contact Shape: Circular
• Operating Temperature Range: -65°C ~ 105°C
• Voltage Rating: 30VAC
• Material Flammability Rating: UL94 V-0
• Insulation Material: Thermoplastic
• Contact Material: Copper Alloy

The substitute part 5-104071-8 meets all mandatory matching parameters and is therefore classified as a direct equivalent. Both parts share the same base product number (104071) and are manufactured by TE Connectivity AMP Connectors within the AMPMODU System 50 series. Variations in contact finish specifications and compliance certifications do not affect functional interchangeability for standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 104071-8 and 5-104071-8 are active products manufactured by TE Connectivity AMP Connectors and are suitable for direct substitution in applications requiring a 6-position, 1.27mm pitch rectangular connector header with through-hole solder termination.

Compliance Considerations:

The 104071-8 is listed as Not Applicable for RoHS status with REACH Affected designation. The 5-104071-8 is ROHS3 Compliant with Vendor Undefined REACH status. For applications subject to RoHS3 or REACH compliance requirements, the 5-104071-8 is the appropriate selection.

Contact Finish Specification:

The primary difference between these parts is the post contact finish: 104071-8 specifies Tin-Lead, while 5-104071-8 specifies Tin. Both finishes meet the same thickness specification of 150.0µin (3.81µm). This distinction may be relevant for applications with specific soldering process requirements or environmental restrictions on lead content.

Inventory Availability:

The 5-104071-8 maintains higher inventory levels (7813 pieces) compared to the 104071-8 (1111 pieces), making it the preferred alternative for high-volume procurement or extended lead-time mitigation.

Frequently Asked Questions (FAQ)

Q: Can the 5-104071-8 be used as a direct replacement for the 104071-8 in existing designs?

A: Yes. Both parts are functionally equivalent across all critical electrical and mechanical parameters including connector type, position count, pitch spacing, mounting method, and operating temperature range. The parts are interchangeable for standard applications.

Q: What is the significance of the contact finish difference between Tin-Lead and Tin?

A: Both finishes provide equivalent electrical performance and meet the same thickness specification. The Tin finish in the 5-104071-8 reflects lead-free manufacturing practices and may be required for applications subject to RoHS3 compliance. Selection between these finishes depends on soldering process compatibility and regulatory requirements specific to the end application.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the 104071-8 and 5-104071-8 are rated for automotive applications and maintain the same operating temperature range of -65°C to 105°C, UL94 V-0 flammability rating, and 30VAC voltage specification required for automotive connector standards.

Q: What is the difference in RoHS compliance between these parts?

A: The 104071-8 is listed as Not Applicable for RoHS status, while the 5-104071-8 is ROHS3 Compliant. For new designs or applications requiring RoHS3 certification, the 5-104071-8 is the appropriate selection.

Q: Do these connectors require any special handling or storage considerations?

A: Both parts are classified as Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without special moisture control measures. Standard component storage practices are sufficient for both part numbers.

Q: Can these headers be used interchangeably with other AMPMODU System 50 series components?

A: Yes. Both the 104071-8 and 5-104071-8 are part of the AMPMODU System 50 series and maintain full compatibility with other components within this series, including mating connectors and cable assemblies designed for 1.27mm pitch applications.