LAPP 10401400 Female Insert Cage Clamp Connector - Equivalent & Substitute Parts

Part Overview

The LAPP 10401400 is a female insert connector accessory designed for the EPIC® HB heavy-duty connector series. This 32-position cage clamp insert operates at 500V with a 16A current rating and is constructed from polycarbonate housing with silver-finished copper alloy contacts. The component is classified as Active product status with 711 units currently in stock.

Alternative components may be required due to supply chain constraints, design specification changes, or application-specific termination method requirements.

Substiute Parts

10401400

LAPPIn Stock: 81810401400 Datasheet

Current PartRFQ

09330162726

HARTINGIn Stock: 123509330162726 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution analysis for the LAPP 10401400 is based on the following critical parameters that determine functional equivalence:

Primary Compatibility Criteria:

• Connector type classification (Insert)
• Gender specification (Female)
• Voltage rating (minimum 500V)
• Current rating (minimum 16A)
• Operating temperature range (-40°C to 125°C)
• Housing material (Polycarbonate)
• Contact material and finish (Copper Alloy with Silver finish)

Secondary Considerations:

• Position count and size designation
• Termination method (Cage Clamp vs. Push In)
• Series compatibility (EPIC® HB vs. Han® ES)

The identified substitute part HARTING 09330162726 operates within compatible electrical parameters but differs in position configuration (16+Ground vs. 32 positions) and termination methodology (Push In vs. Cage Clamp). These differences require engineering evaluation for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

LAPP 10401400 Selection Criteria:

• Applications requiring 32-position configuration
• Systems utilizing cage clamp termination methodology
• EPIC® HB series ecosystem integration
• Designs specified for HB16 size standard

HARTING 09330162726 Selection Criteria:

• Applications requiring 16-position plus ground configuration
• Systems utilizing push-in termination methodology
• Han® ES series ecosystem integration
• Designs specified for 16B size standard
• Applications benefiting from UL94 V-0 flammability rating
• RoHS3 compliance requirement
• REACH unaffected status requirement

Both components maintain Active product status and are available in production quantities. Selection between these components depends on specific application requirements regarding position count, termination method, and series compatibility rather than electrical performance parameters.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09330162726 directly replace LAPP 10401400 in existing assemblies?

A: Direct replacement is not recommended without design review. While both components share compatible electrical ratings (voltage, current, temperature), they differ in position count (32 vs. 16+Ground), termination method (Cage Clamp vs. Push In), and series designation (EPIC® HB vs. Han® ES). Physical and electrical interface compatibility must be confirmed for the specific application.

Q: What are the key differences in termination methodology?

A: The LAPP 10401400 uses cage clamp termination, which secures conductors through spring-loaded clamp mechanisms. The HARTING 09330162726 uses push-in termination, where conductors are inserted directly into contact receptacles. These methods require different tooling and installation procedures.

Q: Are both components suitable for the same voltage and current applications?

A: Yes. Both components are rated for 16A current. The HARTING 09330162726 has a higher voltage rating (600V vs. 500V), making it suitable for applications requiring either 500V or 600V operation. Both operate across the -40°C to 125°C temperature range.

Q: What compliance differences exist between these components?

A: The HARTING 09330162726 carries UL94 V-0 flammability certification, RoHS3 compliance, and REACH unaffected status. The LAPP 10401400 specifications do not include these certifications in the provided data. Applications with specific compliance requirements should reference these designations.

Q: How do position counts affect application compatibility?

A: The LAPP 10401400 provides 32 contact positions, while the HARTING 09330162726 provides 16 positions plus a dedicated ground position. Applications designed for 32-position connectivity cannot be directly served by the 16-position component without circuit redesign.

Q: Are these components from the same connector family?

A: No. The LAPP 10401400 belongs to the EPIC® HB series (HB16 size), while the HARTING 09330162726 belongs to the Han® ES series (16B size). These are distinct connector families with different mechanical and electrical interfaces.